Agr5339ba53 Parts

The Glass Bracket is an OEM replacement part for Whirlpool range ovens. It is designed to securely hold the inner glass panel in place, ensuring proper insulation and visibility while cooking. It helps to maintain the integrity of the oven door and prevents any potential hazards or heat loss.

A bad oven door inner glass bracket can occur due to wear and tear, accidental damage, or improper installation. If you notice symptoms such as a loose or misaligned inner glass panel, rattling sounds when opening or closing the oven door, or difficulty in maintaining the desired temperature inside the oven, it may be time to replace the bracket.

Symptoms of a bad oven door inner glass bracket include:

• Loose or misaligned inner glass panel
• Rattling sounds when opening or closing the oven door
• Difficulty in maintaining the desired temperature inside the oven

Repair your range oven by replacing the faulty or damaged oven door inner glass bracket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This door hinge supports and pivots the appliance door for smooth opening and a secure, even close. Replacing a worn hinge restores proper alignment and sealing to help prevent gaps and ensure reliable operation. What it does:

• Provides the pivot point and structural support for the door
• Maintains alignment and closing tension for a flush, even seal
• Helps ensure correct latch or switch engagement
• Common symptoms of a failing hinge: door sagging, not closing fully, uneven gaps, squeaking/grinding, or the door popping open

• Door hinge

• Disconnect power to the appliance before servicing
• Support the door while removing and installing the hinge to prevent damage
• Transfer and reuse original mounting hardware as needed
• After installation, check door alignment and closure; adjust per the service instructions

Replacement screw used to secure components and panels in household appliances, restoring proper fit and effectively reducing movement or rattling from loose or missing fasteners. What it does:

• Secures panels, trim and internal components to keep parts aligned and stable.
• Helps stop rattling, vibration or noise caused by loose or missing fasteners.
• Restores proper mounting for brackets, covers and control housings.
• Useful wherever a worn or stripped screw is causing play or loose parts.

• Disconnect power and unplug the appliance before doing any work.
• Use the correct driver and size to avoid stripping the head or threads.
• Tighten snugly but avoid overtightening—replace with the exact OEM screw when specified.

This burner venturi channels gas from the valve orifice to the burner head and mixes in the right amount of air to produce a stable flame. Replace a corroded or clogged venturi to restore reliable ignition and flame quality.

• Directs gas from the orifice to the burner head and blends in combustion air
• Helps maintain an even flame pattern and consistent heat output
• Addresses weak/low or yellow flames, uneven heating, or delayed ignition
• Replaces venturis damaged by corrosion or blocked by spills/debris

• Shut off gas supply and disconnect power before servicing
• Remove grates, caps, and burner head to access the venturi; remove per your model's procedure
• Note orientation and transfer any existing gasket/seal from the original part
• Reassemble, restore gas, check connections for leaks with a soap solution, and verify proper ignition and flame

This gas tubing is the preformed line that carries fuel from the appliance's gas valve/manifold to a burner. Replacing a damaged or kinked tube restores safe, consistent gas flow for reliable ignition and even heating. What it does:

• Routes gas from the valve or manifold to a specific burner
• Maintains proper fuel delivery to support steady flame and correct burner performance
• Common signs it's needed: weak or uneven flame, no ignition on that burner, visible kinks/damage, hissing or gas odor (do not operate if a leak is suspected)
• Direct, shaped replacement to restore original gas routing

• 1 gas tube

• Shut off gas supply and disconnect power before servicing; ventilate the area
• Match the original routing and orientation; avoid bending or kinking the new tube
• Use two wrenches on flare/compression fittings to avoid stressing components
• After reassembly, check all connections with an approved leak-detection solution—never with an open flame

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

• Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
• Helps keep components aligned and secure during operation
• Replace if the original is missing, rusted, stripped, or damaged
• Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

• Disconnect power; shut off gas or water supply before servicing
• Support the panel or part being attached; hand-start threads to avoid cross-threading
• Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
• If multiple matching screws secure a part, consider replacing them as a set for consistent hold

The LP Conversion Kit is an OEM part for Whirlpool ranges and cooktops. This kit allows compatible models to be converted from natural gas to liquid propane fuel. The conversion kit includes all necessary components to safely and efficiently operate the appliance on liquid propane such as orifice jets, burners, valve, and install instructions.

Causes for requiring an LP conversion include changing your fuel source from natural gas to liquid propane. It ensures your range flame characteristics and heat output are optimized for the new fuel type.

Symptoms of the need for an LP conversion kit include:

• Inability to ignite or light burner flames
• Uneven or incomplete burner combustion
• Strong gas smells coming from the appliance
• Poor cooking performance

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is a replacement screw used to secure panels, trim, or small components on compatible Whirlpool appliances. Installing the correct fastener restores proper fit and helps stop rattles or loose trim. What it does:

• Secures trim, panels, or control components to prevent movement and rattling
• Replaces missing or damaged hardware that can cause gaps or loose parts
• Helps maintain proper alignment of panels and movement-free operation
• Used wherever a factory screw of this size and head style is specified

• Always disconnect power (and water, if applicable) before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Install by hand until threads engage, then tighten snugly—do not overtighten
• Keep removed hardware organized before final reassembly

Screws for range anti tip bracket: WP3801F656-51. Includes 2 screws.

The Oven Liner Touch Up Paint is an OEM part for Whirlpool ovens. This 2 oz warm white touch-up paint is designed to cover minor scratches, chips, and blemishes on the oven liner, restoring its appearance and protecting it from further damage. 

Causes of a bad oven liner include exposure to high temperatures, accidental impacts, and abrasive cleaning materials, which can lead to scratches, chips, and discoloration. Over time, these imperfections can worsen, making it necessary to use touch-up paint to maintain the oven liner’s integrity.

Symptoms of a bad oven liner include:

• Visible scratches or chips on the oven interior
• Discoloration or fading of the liner
• Increased difficulty in cleaning the oven liner
• Potential rust or corrosion in affected areas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This surface burner head replaces a worn or clogged top burner on gas ranges and cooktops, restoring a steady, even flame and reliable ignition so your burners heat consistently for everyday cooking.

• Mixes gas and air to produce the cooking flame
• Works with the igniter to light the burner
• Directs flame evenly around cookware
• Common symptoms: weak or uneven flame, yellow tipping, delayed ignition or no light, soot, or popping noises

• Disconnect electrical power and shut off the gas; allow the cooktop to cool completely
• Remove grate and burner cap; take out the mounting screw(s) and lift off the old burner head
• Align the new head with the igniter and orifice holder; reinstall screw(s) and the cap
• Restore gas and power; test ignition and verify a clean, even flame

• Many models use different burners by position and output; match the exact part number for the correct location
• Clear clogged ports with a soft brush or compressed air—do not enlarge ports with pins or drill bits

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

This clip secures the oven's bottom panel to the range chassis so the floor of the oven stays properly seated during cooking and cleaning. Replacing a missing or bent clip stops rattles and keeps the panel locked in place. What it does:

• Holds the oven bottom panel securely in position
• Helps prevent the panel from lifting, shifting, or rattling
• Restores proper fit after cleaning or service
• Replace if the clip is missing, bent, or broken

• 1 clip

• Disconnect power and allow the oven to cool completely; shut off gas supply for gas models
• Remove oven racks and the bottom panel per your model's instructions
• Install the clip at the designated mounting point and ensure the panel edge seats under the clip
• Wear cut-resistant gloves; sheet-metal edges can be sharp

This hinge receiver secures the appliance door to the cabinet frame to restore proper alignment and stable operation. Replace a damaged receiver to stop door sagging, gaps, or uneven closing. What it does:

• Anchors the door hinge to the cabinet so the door opens and closes smoothly
• Restores correct door alignment to eliminate rubbing or uneven gaps
• Reduces door sag and prevents the door from catching or sticking
• Works with the hinge assembly to maintain a tight door seal

• Disconnect power to the appliance before starting any repair to avoid injury
• Support the door while removing hinge fasteners to prevent the door from dropping
• Use appropriate hand tools; inspect hinge hardware and replace any worn screws or bushings
• Test door operation and alignment after installation; adjust hinge position as needed

The Clip is an OEM component specifically designed for Whirlpool ranges. This clip plays a role in securely holding and mounting components within the appliance. 

The clip is designed to securely grip parts in place, preventing unwanted movement or dislodging that could impact the operation or result in damage. It allows for components to be effortlessly installed while remaining firmly affixed. 

Causes of a bad clip can include wear and tear over time, damage due to excessive force or impact, or deterioration from heat exposure. 

Symptoms of a bad clip include: 

• Loose or detached components inside the appliance 
• Increased vibration or unwanted noise during operation
• Components that are not sitting securely or properly installed
• Difficulty accessing or removing parts that rely on the clip 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.