Amana Adb1400 Parts

The Sump is an OEM part for Whirlpool dishwashers. Located in the bottom of the dishwasher tub, the sump collects drainage water and debris during the wash cycle. 

Causes of a bad sump can include a buildup of residue inside the filtering mechanism, cracks or fractures in the plastic housing, or damaged drain fittings.

Symptoms of a bad sump include: 

• Incomplete cleaning or rinsing of dishes due to debris circulating back in the water 
• Puddles or pooling of water at the bottom of the tub
• Leaks or water damage underneath the dishwasher
• Strange odors coming from inside the dishwasher  
• Loud draining noises during the cycle

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models. 

This replacement console is the exterior control panel housing that holds your appliance's buttons, knobs and display so you can operate settings and view status. It restores the user interface and the visible trim around the controls. What it does:

• Provides the mounting and visible trim for buttons, touchpads and display windows
• Protects underlying control electronics from everyday wear and direct contact
• Helps resolve user-interface issues such as missing or damaged buttons, cracked trim, or broken display windows
• Reinstates a clean, finished appearance to the front of the appliance

• Disconnect power to the appliance before starting any repair
• Handle plastic or painted surfaces carefully to avoid scratches during removal and installation
• Installation typically requires removing housing screws and reconnecting any button or display harnesses; retain all fasteners
• If electronic controls or the control board are damaged, verify those components separately — this part is the exterior console housing only

This brace connector is a small structural support that secures and stabilizes appliance components, helping maintain proper alignment and reduce vibration. It restores firm attachment where a worn or broken connector causes movement. What it does:

• Secures joining points between panels or assemblies to prevent looseness and rattling
• Restores proper alignment of connected parts so doors, panels, or controls operate smoothly
• Helps reduce vibration and noise caused by a failed or missing connector
• Works as the replacement structural fastener specified by the manufacturer

• Disconnect power (and water if applicable) before beginning any repair
• Basic hand tools (screwdriver, socket) typically required; inspect mounting hardware and replace if damaged
• Verify correct orientation and tightness during installation to avoid stressing adjacent parts

The Harnes-Wire is an OEM component specifically designed for Whirlpool dishwashers. It is part of the control board assembly and works to route power and signals throughout the dishwasher. 

Causes of a bad harness-wire can include shorts, cuts or abrasions to the wiring over time due to normal wear and tear in the dishwasher interior. Corrosion or damage around connector pins can also interfere with proper connections.

Symptoms of a bad harness-wire include:

• The dishwasher not operating or starting
• Features like heating and washing not functioning 
• Random cycling or behavior
• Error codes displayed
• Connections coming loose around the control board

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic control board is the appliance's central control. It interprets inputs and controls power to key components, helping restore normal operation when the original board is faulty.

• Coordinates timing and power to motors, valves, heaters, fans, and lights
• Processes signals from sensors and the user interface to run cycles
• Stores control logic and diagnostics to manage operation
• Failure symptoms can include: won't start or power up, unresponsive or erratic controls, cycles that won't run or complete, persistent error codes

• Disconnect power and verify no voltage before servicing
• Use ESD protection; handle the PCB by the edges to prevent damage
• Note/photograph all wiring and connectors; transfer any brackets, jumpers, or guides from the original board
• Some models require service-mode setup or programming after installation—refer to your unit's tech sheet or service manual

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary

This wire harness is an OEM-style electrical connector assembly that routes power and signals between the control and appliance components, restoring reliable connections and helping resolve intermittent or failed operation. What it does:

• Replaces damaged, frayed or corroded wiring that can cause intermittent power or communication failures
• Restores proper connections between controls, motors, sensors or switches
• Helps stop issues like failure to start, erratic operation, or components not responding
• Provides factory-style plug-and-play connectors for a secure fit

• Disconnect power to the appliance before beginning any repair
• Compare the new harness to the old one to ensure connector locations and length before installation
• Route and secure the harness away from moving parts and heat sources to prevent wear
• If you find burned connectors or other damage, inspect related components and wiring for root causes

This replacement lever operates the overflow/level switch assembly to help the washer detect and respond to water level changes. It restores the mechanical action that tells the control when the tub is full. What it does:

• Moves the overflow/level switch mechanism so the machine can sense water level correctly
• Helps address overfilling, continuous filling, or erratic fill behavior caused by a worn or broken lever
• Restores reliable engagement between the float/actuator and the switch
• Works as the mechanical linkage for the overflow/level sensing assembly

• Disconnect power and turn off the water supply before beginning service.
• Access typically requires removing the cabinet or control console; keep fasteners organized.
• Install the lever so it aligns with the switch actuator and float linkage; verify smooth movement after assembly.