Amv115ovaw-4 Parts

This is the front vent grille for an over-the-range microwave. It covers the exhaust opening at the top front of the unit, directing airflow while giving the microwave a finished, clean appearance.

• Directs exhaust airflow from the microwave's ventilation system
• Provides a finished front appearance and helps keep internal components protected
• Common failure symptoms include a cracked, broken, or loose front grille

• Disconnect power to the microwave before servicing
• Open the microwave door and remove the mounting screws securing the grille
• Slide the grille out; align the new grille and reinstall screws without overtightening
• Support the microwave if it shares mounting with the grille to avoid shifting

This door interlock microswitch detects when the microwave door is fully closed and allows the unit to run only under safe conditions. Replacing a worn switch restores reliable starting and consistent operation tied to the door latch.

• Monitors the door-latch position and completes the safety interlock circuit when the door is closed
• Helps prevent operation with the door open
• Common symptoms: microwave won't start or stops when the door is moved; requires pushing/jiggling the door to run
• Contributes to "runs but no heat" or light/fan behavior that changes as the door is opened/closed

• Unplug the microwave before service; internal high-voltage components can retain a dangerous charge
• Access the switch at the door-latch assembly; transfer wires one at a time to the new switch to maintain correct positions
• Ensure the actuator aligns with the door latch and that the switch clicks freely when opening/closing the door
• After reassembly, test with a microwave-safe cup of water to ensure proper operation

This microwave magnetron is the high-voltage tube that creates the microwave energy used to heat and cook food. Replace it to restore heat when the unit runs but doesn't heat or makes an unusually loud electrical hum.

• Produces the microwave energy that cooks food inside the oven cavity
• Common failure sign: microwave runs but does not heat
• May be accompanied by a loud humming/buzzing or a burning odor near the magnetron area
• Note: Similar no-heat symptoms can also be caused by the high-voltage diode, capacitor, or transformer—diagnose before replacing

• Unplug the microwave and discharge the high-voltage capacitor before servicing; lethal voltage is present
• Access typically requires removing the outer cabinet; document wire locations and screw positions for reassembly
• Handle the ceramic antenna carefully; ensure the waveguide cover/seal and all shielding screws are intact and reinstalled

The Microwave Thermostat is an essential component for maintaining the optimal performance of your microwave. This genuine OEM part ensures precise temperature control, allowing your appliance to operate efficiently and safely. Designed specifically for a variety of Samsung microwave models, it guarantees a secure and seamless fit, making installation straightforward for DIY repairs. The thermostat regulates the heating process, preventing overheating and ensuring consistent cooking results every time you use your microwave. By replacing a faulty thermostat with this reliable part, you can restore your microwaveGÇÖs functionality and extend its lifespan without the need for professional service. Its durable construction ensures long-lasting performance, giving you peace of mind and contributing to the overall safety of your kitchen. Whether your microwave is experiencing temperature fluctuations or failing to heat properly, the Microwave Thermostat provides a practical and effective solution. Choose this genuine OEM part to achieve dependable results and enjoy a consistently efficient microwave experience.

The Nut is an OEM part for Whirlpool microwaves. It helps secure various parts within the microwave, ensuring proper assembly and function. It is used to fasten items, keeping them securely in place during use.

A bad microwave nut can occur due to wear and tear over time or accidental damage. If the nut becomes loose, stripped, or misplaced, it can lead to instability and compromise affected parts.

Symptoms of a bad microwave nut include:

• Loose or wobbly parts.
• Difficulty in operating the microwave.
• Unusual noises or vibrations during use.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This magnetron capacitor is the microwave high-voltage capacitor that helps supply the magnetron with the pulse of energy needed to produce heat. Replacing a failing capacitor restores normal heating performance and reduces arcing or loud humming. What it does

• Stores and releases the high-voltage pulse required by the magnetron so the microwave can generate heat.
• Prevents unstable magnetron operation that can cause weak or no heating.
• Common symptoms of a failing capacitor: oven runs but doesn't heat, intermittent heating, loud buzzing/humming, or visible arcing inside the cavity.
• A failed capacitor can also cause blown internal fuses or tripped circuits.

• One capacitor.

• Disconnect power and verify the appliance is completely de-energized before servicing.
• Capacitors can hold dangerous charge; discharge the capacitor safely with an insulated tool.
• Use the exact replacement part and follow the appliance service manual for routing and connections.

This mounting plate anchors the back of an over-the-range microwave to the wall studs, providing the primary support for installation. Replace a bent, damaged, or missing plate to restore a safe, level, and secure mount.

• Provides the rear-wall anchor point the microwave hangs on during installation
• Helps keep the unit level and securely supported under normal use
• Enables proper alignment so top mounting hardware can fasten correctly
• Typical symptoms: can't hang or align the microwave, unit sags/tilts, rear hooks won't engage, plate is bent or corroded

• Disconnect power before beginning
• Use two people to remove/hang the microwave for safety
• Locate wall studs, level the plate, and fasten per your model's installation instructions with the correct hardware
• The microwave's rear tabs fully engage the plate before final tightening

This magnetron is the microwave's high-voltage tube that generates the microwaves responsible for heating food. Use it as a direct replacement when your microwave powers on but no longer heats properly. What it does:

• Generates the microwave energy that heats and cooks food inside the oven cavity.
• A failing magnetron commonly causes the oven to run but not heat; other signs can include weak or uneven heating.
• Can produce unusual humming, arcing or sparking inside the cavity, or a burning smell when failing.
• Works as part of the high-voltage circuit; other components affect overall function.

• Disconnect power and unplug the appliance before servicing; the high-voltage capacitor must be safely discharged.
• Handle the magnetron carefully by the mounting flange—avoid touching the ceramic antenna or terminals.
• Verify exact part number compatibility with your model before ordering; some repairs require replacing other high-voltage components.

This Light Housing secures and protects the interior lamp assembly, helping keep the compartment safely illuminated. Replace a cracked or heat-damaged housing to restore a stable bulb fit and consistent lighting performance. What it does:

• Provides a stable mount for the interior light bulb/socket
• Shields nearby wiring and components around the lamp area
• Helps position the light for proper illumination inside the compartment
• Common signs of wear: cracked or melted housing, loose bulb fit, lens/cover won't stay attached, intermittent lighting from a poor physical connection

• 1 light housing

• Disconnect power to the appliance before servicing
• Remove the lens/cover and bulb, then unfasten the damaged housing
• Transfer the existing socket, wiring, and any hardware from the old housing as needed
• Reinstall the housing, replace bulb/cover, restore power, and test the light

This is the appliance's main power cord. It delivers household electricity to the unit so it can operate safely and reliably.

• Supplies AC power from the wall outlet to the appliance's internal wiring
• A damaged or failed cord can cause no power, intermittent power, or tripped breakers
• Replacing a worn cord can restore consistent power and improve safety

• Unplug the appliance and turn off power at the breaker before service
• Route and secure the cord to prevent pinching or abrasion

This replacement screw secures appliance components such as panels, brackets, and covers. Replace a missing or stripped fastener to restore a tight, rattle-free fit and proper alignment. What it does:

• Secures panels, brackets, trim, and internal assemblies in place
• Replaces lost, corroded, or stripped hardware
• Helps reduce vibration and rattling from loose components
• Maintains correct fit and alignment of covers and parts

• One screw

• Disconnect power before servicing; wear appropriate safety gear
• Match the screw to the original location; transfer any washers or clips from the old hardware
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair damaged receiving threads before installing the new fastener

This door handle replaces a worn, cracked, or missing handle to restore a secure grip and smooth door operation. Refresh the look of your appliance and get back to reliable, comfortable opening and closing with a factory-fit replacement.

• Provides a solid handhold for opening and closing the door
• Restores proper fit when the original handle is loose, cracked, or missing
• Helps resolve difficulty opening the door or a handle that wobbles or falls off
• Matches original mounting points for straightforward replacement

• Disconnect power (and gas, if applicable) before servicing
• Support the door and access mounting fasteners
• Transfer any handle trim/brackets as needed and reuse existing fasteners
• Do not overtighten, especially on glass or decorative panels; confirm alignment and test operation

This microwave magnetron generates the RF energy that heats food. If your unit runs but won't heat—or makes a loud hum—the magnetron may be at fault. Replace this assembly to restore dependable heating.

• Produces microwave energy as part of the high-voltage system to heat food
• Typical failure symptom: runs but does not heat
• Loud humming or buzzing during a cook cycle
• Burning smell, arcing, or scorch marks near the waveguide/magnetron
• Trips the breaker or blows an internal fuse at start when shorted

• Disconnect power before service; the high-voltage capacitor can retain a dangerous charge—discharge it properly
• Note wire orientation and mounting; transfer any original brackets/insulators as required; install in the same orientation
• Handle by the body only; do not touch or chip the ceramic antenna
• Inspect the waveguide and cavity cover for signs of arcing and correct any damage before use

The Microwave Door Lever Switch is essential for maintaining the proper function of your microwave. This genuine OEM part ensures your appliance operates safely by controlling the door mechanism. When the door is open, the lever switch prevents the microwave from running, enhancing safety in your kitchen. Crafted with durability in mind, this switch provides long-lasting performance, reducing the need for frequent replacements. Installing the Microwave Door Lever Switch is straightforward, allowing you to quickly restore your microwave's functionality without hassle. It is compatible with a variety of Samsung microwave models, ensuring a perfect fit and seamless integration. By choosing this genuine OEM part, you guarantee the reliability and efficiency of your microwave, helping you enjoy consistent cooking results. Enhance your microwave's performance and safety with the Microwave Door Lever Switch , a dependable solution for your appliance repair needs.

This microwave door assembly replaces a damaged or misaligned door to restore proper latching, interlock engagement, and appearance. Install it when the door is cracked, warped, or won't close so the microwave can operate as designed.

• Restores proper latching and door-switch engagement so the unit runs only when fully closed
• Replaces cracked/shattered door glass or a bent/warped door frame
• Corrects door misalignment that prevents closing or causes the microwave not to start
• Refreshes the unit's look after heavy wear or impact damage

• Disconnect power before servicing the appliance
• Support the door while removing/installing hinge pins or screws to avoid damage
• Transfer any hinge bushings, screws, or nameplate/emblems from the old door if required by your model
• After installation, verify smooth open/close and firm latch engagement before use

This inlet cover protects and conceals the appliance's inlet area, keeping wiring and connections secure and helping prevent debris from entering. It restores a clean, safe inlet opening and supports proper component alignment. What it does:

• Shields the inlet opening and nearby connections from dust and debris
• Holds inlet components in position to reduce movement and wear
• Helps prevent snagging or accidental contact with inlet wiring or fittings
• Visible damage or a loose/misaligned cover can expose connections and lead to leaks or electrical issues

• One inlet cover

• Disconnect power and shut off water supply before beginning work
• Remove the appropriate access panel or trim to reach the inlet area
• Replace cover, securing with the original screws or clips; do not overtighten
• Inspect nearby gaskets, fittings and wiring while replacing the cover