Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Small drive gear inside the washer transmission gearcase that meshes with mating gears. Replace when worn, stripped, or damaged to restore power transfer.
American appliances are very easy to fix in comparison to imported ones. Just open the washer and take de transmission cover out change the pinion inside removing a simple retainer. In the agitator there is a screw that you loosen it take it out, then de tub and take the shaft out and put a new seal and a new c clamp and reinstall everything back. Top-loading washers are very easy to fix in comparison to front-loading washers that are very difficult to fix. Read more
Small metal clip that secures panels, brackets, or tubing in place inside appliances. Replace if bent, fatigued, or missing to restore secure mounting.
Here's the story. All my appliances except the dryer broke. Yeah. talk about bad luck. First I tried to fix the refrigerator. Replaced both motherboard and inverter board. Now it wakes up but the compressor does not kick in. Need another part. The washer, well I have to pull out the sink to get enough room to pull out the washer to fix it. Since the refriigerator is still in the middle of the kitchen, I don't need to tear apart another room. Nevertheless, let me say this, I love my "older"... Read more
Replace this washer gasket seal to stop leaks between components. Worn gaskets cause water leakage and poor performance. Verify fit with your model.
We ordered parts from appliance parts pros and I fixed it. Read more
Inlet hose strainer and washer kit for washers. Replace if you notice leaks at hose connections or reduced water flow. Confirm fit with your model.
Washer screeching or brake not engaging properly? This brake lug stop limits pulley travel to restore smooth, safe operation. DIY repair part.
I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the... Read more
Washer only spinning or making grinding noises? This drive assembly spacer washer maintains proper clearance between components for smooth, quiet operation.
Found the wonderful parts diagrams you most generously share online and a couple of YouTube videos . I determined it should be repairable. In my cast the agitator shaft was frozen (rusted) in place. I was very fortunate to have been able to eventually remove it with the use of a lot of BP penetrating oil and heat. Long and short the replacement parts fit perfectly and the washer is running like new. Special thanks to the online support make my repair possible. Read more
Secures trim pieces, molding, and decorative panels on your washer. Replace when fasteners are missing, loose, or causing rattling for a finished look.
Washer won't spin or spins weakly? A worn clutch plate causes slipping and shuddering during spin cycles. Moderate DIY repair restores reliable performance.
Secures pedestal panels, brackets, and trim pieces. Replaces missing, stripped, or damaged screws to restore proper alignment and eliminate rattling.
By ordering the screws and pads from appliancepartspros.com which were delivered practically overnight! The service was beyond expectations! Read more
Factory fastener screw secures dryer panels, brackets, and internal components. Replace missing, stripped, or damaged screws to restore tight fit and alignment.
This was a very easy fix. Two screws to get the front off of the washer. Removed one side of the tensioner spring. Loosened two screws for the motor and two screws for the pump. I decided to replace the agitate belt even though it wasn't broken.. So, I removed that belt from the pulleys and the removed the broken belt. then just reversed the process to install the belts. it toke me less than 30 minutes and my washer was back in service. Read more
Washer won't spin or drive pulley cover fell off? This retaining pin collar secures the transmission shaft. DIY repair in under 1 hour with panel access.
The collar pin sheared off in the transmission of my Maytag washer. Watching on-line videos of removing the transmission looked like major project. With the front panel removed, you can repair the transmission without removing it from the washer. Remove the front panel, lay the washer on its back, rotate the transmission assembly so the cover is up. Unbolt and remove the cover, put a pan under the transmission and rotate it to drain the oil. Be sure to find all of the collar pin that... Read more
Replaces a cracked, leaking, or worn washer fill hose. Connects your water supply to the washer inlet. Essential when your old hose shows damage.
Replaced hose and washers. Read more
Fix a loose or slipping agitator that clicks or ratchets during wash cycles. This spring restores proper tension inside the agitator assembly.
Usually ships within 4 - 14 days
Maintains tension on the dryer drive belt for smooth drum rotation. Replace when you hear squealing, rubbing noise, or the drum doesn't spin properly.
Mounting screw for dishwashers. Secures internal components and panels. Replace if stripped, missing, or corroded during repair or maintenance work.
Captures lint, pet hair, and debris during wash cycles to keep clothes cleaner. Replace when cracked or clogged. Confirm fit with your model number.
Bought replacement part. Read more