Bosch Shp65cm2n Parts

The Panel-Facia is an OEM part for Bosch dishwashers.The panel-facia houses all function buttons, cycle/option selectors, and status LED lights.

The panel maintains an attractive appearance while clearly presenting settings. Its integrated controls allow for customized washes tailored to any load.

Causes of a bad panel-facia include exposure to hot steam, detergent splashes and repeated wash cycles over time. This wear accelerates deterioration of touchscreens and graphics.

Symptoms of a bad panel-facia include:

• Non-responsive or unreliable touch buttons
• Faulty or unilluminated status lights
• Loosen mounting points flexing the assembly
• Faded instructions that are difficult to read

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This push button set replaces worn, broken, or missing control-panel buttons so you can reliably operate appliance functions and restore the original look of the control area. Matches the OEM button layout and feel. What it does:

• Replaces cracked, loose, or missing push buttons on the control panel
• Restores tactile response for menu, cycle, and option selections
• Helps stop sticking or intermittent button contact that prevents function selection
• Returns the control panel to a finished, factory appearance

• Disconnect power to the appliance before starting any repairs
• Remove the console or control panel per the model's service instructions to access the button assembly
• Handle the button set and ribbon/connector gently to avoid damage

This push button set replaces worn or broken control-panel buttons to restore reliable manual control and a finished appearance. Designed for straightforward swap-in replacement on compatible Bosch appliances. What it does:

• Replaces damaged or missing push buttons on the control panel
• Restores tactile feedback and accurate button actuation
• Helps prevent unintended operation from stuck or cracked buttons
• Improves the appliance's cosmetic appearance at the user interface

• One push button set

• Disconnect power to the appliance before beginning any service
• Generally installs from the front of the control panel; some panels may require removing trim or access panels
• Handle plastic parts carefully to avoid breaking tabs or clips

The Program Power Control Module is an OEM part for Bosch dishwashers. This module oversees and controls the various functions such as water flow, heating, and cycle durations. 

Causes of a bad Program Power Control Module often involve electrical issues such as shorts or power fluctuations, exposure to moisture leading to damage, or simply the natural degradation from regular usage over time.  

Symptoms of a malfunctioning Program Power Control Module include:

• Dishwasher not starting or stopping unexpectedly.
• Display showing unusual or incorrect error codes.
• Extended or incomplete washing cycles.
• Issues with water temperature regulation.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement hose clamp secures a hose to its fitting to maintain a tight, leak-resistant seal. Replacing a worn clamp helps stop drips and keeps fill, drain, or circulation lines firmly in place for reliable operation.

• Applies clamping force to hold a hose on a barb or stub connection
• Helps prevent leaks at hose joints
• Common symptoms: water leaking at a hose connection, hose slipping off, poor fill or drain performance
• Replace when the original is loose, corroded, distorted, or lost tension; also recommended when installing a new hose

• Disconnect power and shut off water supply before servicing
• Expect some residual water; protect the work area
• Note the clamp's position/orientation; use appropriate hand tools for the clamp style
• Ensure the hose is fully seated and clamp is secure; run a test cycle and check for leaks

This insulating part installs in the specified location to help reduce heat transfer between internal spaces and exterior panels. Replacing a worn or missing insulator helps protect nearby components and maintain proper operating temperatures.

• Provides a thermal barrier to limit heat transfer to surrounding panels and wiring
• Helps prevent scorching or heat damage to adjacent components
• Restores proper insulation where the original has deteriorated or is missing
• Common signs of failure: visible damage or fraying, burnt odor, or unusually hot exterior areas

• Disconnect power and allow the appliance to cool completely before servicing
• Wear gloves and eye protection; insulation fibers can irritate skin and eyes
• Match the original orientation/placement; do not over-compress the material
• Keep insulation clear of vents, heating elements, fans, and moving parts

This suspension damper stabilizes the tub/drum by absorbing movement and vibration during operation. Replacing a worn damper helps reduce shaking and noise, improving spin performance and overall machine stability. What it does:

• Absorbs and controls tub/drum movement to reduce vibration and noise
• Helps prevent banging, "walking," or out-of-balance shutdowns during spin
• Can address excessive shaking, rattling, and longer spin times
• Restores smoother, more controlled operation when the original damper is worn

• One suspension damper

• Disconnect power and turn off water supply before servicing
• Access location varies by model; support the tub/drum to relieve load before removal
• Note orientation and reuse existing mounting hardware if new fasteners aren't provided
• After installation, re-level the appliance and run a test cycle to verify stability

This overflow component directs excess water safely back into the dishwasher's water path to help prevent overfilling and leaks. Replace if damaged to restore correct water management and leak protection.

• Guides overflow water away from the tub into the proper return/drain path
• Helps maintain correct water level during fill
• Can address water collecting in the base pan or leaking from the lower front area
• Useful when the leak protection/float has been tripped or cycles stop due to a detected leak

• Disconnect power and turn off the water supply before servicing
• Access the overflow/water-channel area per your model's service procedure
• Note orientation and transfer any clips or seals from the old part if present
• Reassemble, restore power/water, and run a short cycle to check for leaks

This holder/retainer secures its mating part in the correct position inside the appliance, preventing unwanted movement and ensuring consistent operation. Replace a cracked or missing holder to restore a solid, factory fit and reliable performance.

• Supports and locks the attached component or rack/accessory in place
• Helps prevent vibration, rattling, or misalignment during use
• Typical signs of failure: broken tabs, visible cracks, looseness, or the part no longer staying secured
• Restores proper positioning of the related component for consistent function

• Disconnect power at the breaker; shut off water supply if applicable
• Note the holder's orientation; take a photo before removal
• Reuse existing screws/fasteners if none are supplied with the part
• Seat fully until it clicks/locks; do not overtighten into plastic

This cable harness routes power and signals between appliance control and components to restore reliable electrical connections. It replaces a damaged or worn harness to help eliminate intermittent operation and connectivity issues. What it does:

• Replaces the main wiring harness that links controls, sensors, and motors for proper electrical communication
• Restores reliable power and signal paths to correct intermittent power, non-responsive controls, or components that won't run
• Ensures secure connector mating to prevent arcing and poor contact
• Matches OEM connector types and wire lengths to fit in the original routing

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Compare the new harness to the old one for connector types and routing before installation
• Handle connectors by the housings; do not pull on wires. Ensure all plugs snap fully into place

This insulating protection strip shields wiring and nearby components from heat and abrasion, helping maintain safe operation and prevent premature wear. It's a low-profile, heat-resistant sleeve used where wiring passes near hot appliance parts. What it does:

• Provides thermal and abrasion protection for wiring and small components
• Helps prevent shorting or insulation damage from heat exposure
• Reduces wear where wires contact sharp edges or moving parts
• Commonly used when replacing control or harness components near heat sources

• One insulating protection strip/sleeve as shown

• Only install with power disconnected and appliance fully cooled
• Position sleeve fully over exposed wiring or component and secure per OEM routing
• Inspect surrounding wiring and connectors for damage; replace any frayed insulation

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance