Bosch Shx7pt55uc/01 Parts

This is a replacement screw used to secure panels, trim pieces, and small brackets on compatible Bosch appliances — a simple hardware fix that restores proper fit and stops rattling or loose parts. What it does:

• Fastens outer panels, control bezels, or internal brackets to the appliance chassis
• Keeps panels aligned so doors and controls fit and operate correctly
• Stops vibration noise caused by loose or missing fasteners
• Replaces damaged, stripped, or corroded screws

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Thread by hand to start, then snug; avoid over-tightening which can strip threads or crack panels
• If threads are damaged, replace the mating nut or threaded insert per OEM guidance

The Dishwasher Handle End Cap is an OEM part for Bosch dishwashers. This part provides a finishing touch to the dishwasher's door handle, covering the ends for a smooth, finished appearance. Over time, these end caps can become lost, damaged, or worn, affecting the overall look and use of the dishwasher.

Symptoms of a bad Dishwasher Handle End Cap include:

• Missing or loose end caps
• Visible damage or wear 
• Diffiuculty opening the door

Causes of a bad handle end cap can range from accidental damage during cleaning or use, to natural wear and tear from repeated handling. 

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

The Circulation Motor and Heater Assembly is an OEM part for Bosch dishwashers. This combined unit is responsible for circulating water throughout the dishwasher during wash cycles and heating the water to the optimal temperature for effective cleaning.

Causes of a bad circulation motor and heater assembly can include electrical failures, wear and tear over time, or damage from debris or mineral buildup. A malfunctioning assembly can result in poor cleaning performance and water not being heated correctly.

Symptoms of a bad circulation motor and heater assembly include:

• The dishwasher not cleaning dishes properly
• Water not heating to the required temperature
• Unusual noises such as grinding or humming during operation
• Error codes related to water circulation or heating

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Insert is an OEM replacement part for Bosch dishwashers. It is located inside the wash tub and helps direct water flow during cycles.

Causes of a bad insert can include regular wear and tear, damage from heavy or improperly loaded items, or warping due to exposure to high temperatures and detergents.

Symptoms of a faulty insert include:

• Poor cleaning performance, even on heavily soiled items
• Concentrated residue in certain areas of the tub or racks
• Standing water droplets inside the tub post-cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Toe Panel Support Bracket is an OEM part for Bosch dishwashers. This part provides support and stability to the toe panel, which is the panel at the bottom of the dishwasher's front.

Causes of a bad part can include physical impact, improper installation, or general wear and tear over time, leading to weakening or damage of the support bracket.

Symptoms of a bad Toe Panel Support Bracket can include:

• Looseness or instability of the toe panel
• The toe panel becoming detached or falling off
• Difficulty in properly aligning or installing the toe panel
• Visible damage or cracks in the support bracket itself

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

A direct-replacement display module for the appliance control panel that restores readable status indicators and touch/button feedback so you can use cycle selections and view error information clearly. What it does:

• Shows cycle status, time remaining and error codes on the control panel display
• Relays user input from touchpads/buttons to the main control board
• Fixes symptoms like a blank or flickering display, unresponsive controls, or missing status lights
• Works as the user interface portion of the control assembly for normal operation

• One display module

• Disconnect power to the appliance before beginning any repair
• Handle ribbon cables and connectors gently; ensure secure, fully seated connections
• Remove the outer control panel to access the module—retain screws and trim pieces
• Test the main control board and wiring harness for faults

This insulating part provides a non-conductive, heat-resistant barrier between adjacent components inside the appliance. Replacing a damaged insulator helps prevent unintended contact and heat transfer, supporting safe, reliable operation and protecting nearby parts. What it does:

• Electrically isolates terminals or metal surfaces to help prevent shorts or arcing
• Reduces heat transfer to surrounding components
• Maintains proper spacing and support for the protected component
• Replace if the original is cracked, deformed, missing, or shows burn/discoloration

• 1 insulating part

• Disconnect power before servicing; shut off gas or water if applicable
• Access the component, note orientation/positioning of the original insulator, and transfer any clips or hardware as required
• Seat the new insulator fully and ensure no conductive parts touch unintended surfaces
• Reassemble, restore power, and verify normal operation with no rubbing, arcing, or overheating

This replacement door handle restores a secure grip and proper operation to your appliance door. It provides a direct, OEM-matching fit and helps the door open and close smoothly when the original handle is cracked, loose, or broken. What it does:

• Replaces a damaged, cracked, or broken door handle to restore safe opening and closing
• Provides a firm grip and correct clearance for door operation
• Prevents further damage from using a compromised handle
• Matches original mounting points for straightforward replacement when correct part is used

• Turn off power to the appliance (or unplug) before starting any repair
• Inspect mounting screws and trim; reuse only undamaged hardware or replace as needed
• Typical installation requires removing door trim or inner panel—follow your model's service instructions

This insert is a replacement rack insert designed to restore proper item support and organization inside the appliance. It helps keep dishes and utensils secure so they wash and dry more effectively. What it does

• Replaces a damaged or missing rack insert that no longer holds items securely
• Restores proper spacing and support to prevent shifting or tipping during cycles
• Helps reduce chipping and breakage caused by loose items
• Can improve wash coverage by keeping items in the intended position

• One rack insert as shown

• Remove power and water supply to the appliance before servicing
• Slide out the affected rack and snap or slide the insert into the matching slots; no special tools typically required
• Inspect adjacent clips and rails for wear and replace if damaged

This replacement cable restores an internal electrical connection between components in compatible Bosch appliances, helping fixed or intermittent power/signal issues at the affected circuit. Use it when a damaged or broken cable prevents normal operation. What it does

• Re-establishes a secure electrical link between internal modules or assemblies.
• Commonly replaced for intermittent operation, loss of function, or visible cable damage.
• Helps eliminate shorts or open circuits caused by frayed insulation, broken conductors, or loose terminations.
• Matches OEM routing and termination when used in the correct location.

• High-level task: replace the failing cable with the unit shut off and unplugged or power disconnected at the breaker.
• Observe proper routing and secure any strain reliefs or clips to prevent pinching and abrasion.
• Verify connectors are fully seated and latched; avoid forcing misaligned terminals.

This mounting bracket secures a small internal component in place to restore proper alignment and reduce movement or noise. It's a simple replacement that helps keep your appliance operating quietly and reliably. What it does

• Supports and holds an internal part or assembly in the correct position
• Stops rubbing, vibration, or rattling caused by a broken or loose bracket
• Restores normal alignment so adjacent parts can operate without interference
• Used where a small molded or stamped support is required inside the appliance

• One holder (mounting bracket) as shown

• Disconnect power and water before starting any repair
• Remove access panel(s) to reach the damaged holder; basic hand tools typically required
• Keep original fasteners; replace only if explicitly listed as included