Bosch Shx7pt55uc Parts

The Cup Rack is an OEM part for Bosch dishwashers. It is designed to fit inside the dishwasher tub and provide storage for cups, mugs, and other drinking vessels during the wash cycle.

Causes of a bad cup rack can include broken or missing prongs, cracks in the plastic that compromise stability, or difficulties with the rack sliding smoothly in and out of the tub.

Symptoms of a bad cup rack include:

• Cups and mugs not drying properly or falling over during the cycle
• Difficulty loading and removing cups from the rack
• Excessive noise or vibration coming from the cup rack area
• Inability to secure the cup rack fully inside the tub

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Divertor Motor is an OEM part for Bosch dishwashers.  This part controls the direction of water flow within the unit. This motor directs the water to different spray arms based on the selected wash cycle, ensuring efficient cleaning by optimizing water usage and spray intensity. 

Causes of damage to the divertor motor can include regular wear and tear, exposure to water and detergent over time, and electrical issues such as wiring problems or faults in the control board.

Symptoms of a failing Divertor Motor include:

• Inadequate water distribution during cycles, which can lead to uneven cleaning results.
• The dishwasher making unusual noises, such as humming or grinding, which may indicate a struggle in the motor function.
• Certain wash zones receiving little to no water, affecting the appliance's overall performance.
• Error codes displayed on the dishwasher panel that relate to water circulation problems.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This small hardware washer distributes clamping force and protects surfaces under a screw or nut in your appliance. Replacing a worn or missing washer helps restore a secure fit and reduces vibration or movement in the assembly.

• Distributes fastener load to prevent gouging or deformation of mating surfaces
• Maintains proper spacing and alignment where a washer is specified
• Helps resist loosening from vibration over time
• Common signs: loose or shifting components, rattling, or visible wear around the fastener

• Disconnect power and any water/gas supplies before servicing
• Support the component and remove the fastener to access the washer
• Install the new washer in the same position/orientation as the original; do not overtighten
• Reassemble and verify the fastened joint is secure and operates smoothly

The Handle is an OEM part for Bosch dishwashers. It serves as a convenient and durable component, allowing users to easily maneuver and adjust the dishracks during loading and unloading.

Reasons for requiring a new Dishrack Handle can stem from cracks, breakage, or damage due to impacts or mishandling. Extended use causing wear and tear is another common cause. 

Symptoms of an issue with the Dishrack Handle include:

• Difficulty gripping or sliding the dishrack smoothly
• The handle feeling loose or unstable
• Visible damage, such as cracks or missing pieces on the handle

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This genuine screw secures panels, brackets, and internal components in your appliance, keeping them tight and aligned. Replace worn or missing fasteners to stop rattles and restore a proper fit.

• Fastens sheet-metal panels, brackets, or hardware in place
• Helps maintain alignment and reduce vibration or noise
• Restores secure attachment when a screw is stripped, corroded, or missing
• Typical signs: loose or shifting parts, rattling, or gaps at joints

• Disconnect power; shut off water or gas before servicing.
• Match this screw to the original location and size; replace one at a time.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver type/size required by your model.

This support is a factory replacement component that holds and stabilizes a specific part within your appliance so it stays aligned and secure. Replacing a cracked or missing support restores proper fit and helps prevent noise or binding.

• Provides structural support and alignment for the designated component
• Keeps parts seated securely to minimize movement and vibration during use
• A damaged or missing support can cause looseness, rattling, sagging, or misalignment
• Restores proper fit and function when the original is cracked, warped, or broken

• Disconnect power and shut off any gas/water supplies before servicing
• Refer to your model's parts diagram to identify location and orientation
• Install using the appliance's existing screws or clips; avoid overtightening to prevent damage
• Wear cut-resistant gloves; beware of sharp edges and pinch points

This lock clamp secures an appliance component or assembly so it stays properly seated during operation. Replacing a worn or missing clamp helps restore a stable, rattle-free fit and reliable performance. What it does:

• Holds mating parts together to prevent shifting or vibration
• Helps maintain correct alignment of the secured component
• Can resolve issues where a part won't stay attached or seated
• Restore normal operation when the original clamp is broken or missing

• One lock clamp

• Disconnect power (and shut off water/gas if applicable) before servicing
• Note the clamp's original orientation; take a photo to aid reassembly
• Seat the component fully, then engage the clamp securely without over-stressing it
• Reassemble and test for a firm, stable fit before returning the appliance to service

The Cover Sheet is an OEM part for Bosch dishwashers. It serves as a protective cover for the kickplate area, safeguarding it from dirt, dust, and potential damage.

A bad cover sheet can occur due to wear and tear, accidental damage, or exposure to moisture. Signs of a faulty cover sheet include visible scratches, cracks, or discoloration.

Symptoms of a bad cover sheet include:

• Visible scratches or cracks 
• Discoloration or fading 
• A loose or ill-fitting cover sheet

Replace your damaged or worn-out cover sheet with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This temperature sensor (NTC) monitors wash temperature and reports it to the control so the cycle heats and advances correctly. Replacing a faulty sensor can restore proper cleaning performance and normal cycle times. What it does:

• Measures water temperature and sends resistance changes (NTC) to the control
• Helps the control regulate heating and cycle progression
• Failure symptoms can include no/insufficient heat, extended cycles, or poor drying
• May trigger a temperature-sensor fault (e.g., E11 on some models)

• 1 temperature sensor

• Disconnect power and turn off water supply before servicing
• Access is typically at the sump/heat-pump area; remove the toe-kick/lower panel as needed
• Expect some residual water; place a towel or tray to catch drips
• Ensure the sensor seats fully and the seal is in good condition to prevent leaks

The Spray Head is an OEM replacement part for Bosch dishwashers. It directs pressurized water along the dish racks, targeting every inch of dishware and cookware. Consistent coverage cleans thoroughly without waste.   

Symptoms of a bad spray head can include clogged nozzles, inconsistent patterns, or spray heads that do not oscillate and rotate properly through cycles. Mineral deposits pose blockage risks over time.

Causes of a bad spray head include:

• Uneven or skipped areas of spray coverage inside the machine
• Rotating/oscillating mechanisms that jam or continuously stick  
• Nozzles fully or partially blocked reducing water pressure
• Head assembly detaching from water tub wall or bracket

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This repair set renews the hinge pivot components so the door opens smoothly and closes squarely. Replacing the worn hardware helps maintain proper alignment and a tight gasket seal for consistent performance. What it does:

• Replaces worn hinge pin/bushing hardware to restore door support
• Helps fix a door that sags, scrapes, or won't close flush
• Can reduce clicking, squeaking, or grinding at the hinge
• Helps the door seal make full contact to prevent warm air leaks

• 1 repair set

• Disconnect power; if applicable, turn off the water supply
• Remove items from the door; support the door and lift it off the hinge
• Install the new hinge hardware in the original orientation
• Reinstall and align the door; verify gasket seal and adjust leveling if needed

This factory screw secures select Bosch/BSH appliance components. Use it to replace a missing or damaged fastener so panels, brackets, or trim stay tight and rattle-free during operation.

• Tightens and holds appliance parts such as panels, brackets, or trim in place
• Helps correct issues like loose or vibrating panels caused by a missing/stripped screw
• Maintains proper fitment after service or disassembly
• Torx T20 drive head helps resist cam-out during tightening

• Unplug power and shut off any water supply before servicing
• Use a T20 Torx driver; hand-start to avoid cross-threading
• Do not overtighten—snug to manufacturer torque guidance if available
• Replace any additional missing or damaged fasteners for even clamping

This programmed operating module is the appliance's user interface control board. It interprets button or touch inputs, drives the display and indicators, and communicates with the main control so you can select, start, and monitor cycles.

• Interprets keypad/touch inputs and sends commands to the main control
• Powers and manages display lights/indicators for cycle status and options
• Enables cycle selection, start/pause, and option changes from the control panel
• Common failure signs: unresponsive buttons, blank or erratic display/LEDs, or inability to start/finish a cycle

• Disconnect power at the breaker before servicing; verify power is off.
• Access is typically from behind the control panel; remove trim/screws as required.
• Handle the board with ESD care; transfer wiring/connectors one at a time, matching orientation.
• After reassembly, restore power and run a test to confirm all keys and indicators operate.

This factory fastener secures panels, brackets, and internal components in your appliance. Replacing a missing or damaged screw restores a snug fit, reduces vibration and rattles, and keeps assemblies properly aligned during service or reassembly.

• Anchors panels, trim, and internal parts to the appliance frame or subassemblies
• Helps prevent vibration, buzzing, and loose or shifting components
• Ideal replacement for lost, stripped, or corroded hardware
• Common symptoms include loose panels, gaps, rattling noises, or parts that won't stay secured

• Disconnect power and shut off water or gas before servicing
• Match this screw to the original and replace one-for-one in the same location
• Start threads by hand to avoid cross-threading; use the correct driver and do not overtighten
• Inspect the mating clip/insert; replace if stripped or damaged for a secure hold

This micro filter is a fine-mesh replacement filter that traps food particles and debris in the dishwasher sump, helping maintain wash performance and protect the pump and drain from clogs. What it does:

• Captures small food particles to prevent recirculation and reduce spotting
• Helps keep the dishwasher drain and pump from clogging
• Supports consistent water flow for better cleaning results
• Can reduce odors caused by trapped debris in the filter area

• Disconnect power and turn off water supply before servicing
• Remove the lower rack to access the sump area; follow your owner's manual for filter removal
• Ensure the filter is properly seated and locked before running a cycle
• Clean surrounding areas and inspect for additional debris while replacing the filter

This electronic program control manages the appliance's cycle selection and timing so your unit runs the correct program and sequencing. Replacing a faulty module restores programmed functions and command-response from the control panel. What it does:

• Controls program selection, cycle timing and sequence execution
• Sends and receives signals to sensors, valves and motors for proper operation
• Stops or advances cycles based on programmed logic
• Common symptoms: unresponsive controls, cycles won't start or complete, intermittent operation, or error codes related to the control board

• Disconnect power at the breaker or unplug the appliance before starting
• Handle the module carefully to avoid ESD damage; avoid touching circuit components
• Verify connectors are fully seated and mounting is secure before restoring power
• Test basic functions and a full cycle after installation to confirm correct operation