Bosch Was20160uc/28 Parts

The Outlet Hose is an OEM replacement part for Bosch washing machines. As a flexible but durable tube, it safely routes water out of the washer during drain cycles. The outlet hose efficiently expels water through its bonded, leak-proof construction.

Causes of a bad outlet hose typically involve normal wear and prolonged usage. Repeated bending during drainage can cause cracking or splitting in vulnerable areas over time.

Symptoms of a bad outlet hose include:

• Water leaks inside or around the rear of the washer  
• Inability to fully drain water after cycles complete
• Standing water prevents dry cycles from starting  
• Mineral deposits inside from dried leaks or blockages

Replacing your outlet hose with this OEM part restores proper drainage. It ensures reliable emptying of the washing tub. Compatible with some Thermador, Gaggenau, and select Kenmore units.

This genuine replacement motor powers the washer drum, restoring agitation and spin for proper cleaning and draining. Designed to match the original fit and function so your machine can move and drain laundry reliably. What it does

• Turns the drum and drive system so the washer can agitate and spin
• Restores normal spinning and draining when a failed motor prevents drum movement
• Stops abnormal humming or no-start conditions caused by a worn motor
• Works with the washer's transmission and control system to deliver correct wash cycles

• One washing machine motor

• Disconnect power and water before beginning any repair
• Verify electric connections and mounting orientation before final reassembly
• Motor may be heavy or awkward — support the drum/transmission during removal

The Operating Module is an OEM replacement part for Bosch washers. This module serves as the control center for your washer, allowing you to conveniently select and adjust various settings for different wash cycles.

A bad operating module can occur due to electrical malfunctions, damage from power surges or moisture, or normal wear and tear over time. Signs of a faulty operating module include unresponsive buttons, error codes displayed on the control panel, or issues with cycle selection and execution.

Symptoms of a bad operating module include:

• Unresponsive buttons  
• Error codes displayed  
• Issues with cycle selection  

Replace your faulty operating module with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

This front drum motor mounting bushing supports the dryer drum shaft and helps the drum spin smoothly for quiet, even drying. It replaces a worn bearing surface to reduce noise and prevent drum misalignment. What it does:

• Provides a low-friction bearing surface for the drum shaft at the front motor mount
• Helps keep the drum properly aligned during rotation
• Reduces squealing, grinding, or rubbing noises caused by a worn front bushing
• Prevents excess wear on the drum shaft and adjacent components when functioning correctly

• One front drum motor mounting bushing

• Disconnect power before beginning any repair and follow all safety precautions
• Inspect the drum shaft, drum seal, and rear bushing for wear and replace as needed
• Use appropriate tools to remove the old bushing and press or seat the new bushing evenly
• Re-check installation and related components if alignment or noise persists after replacement

2 included - Front load

This holder is a replacement mounting bracket that secures a small internal component in place to restore proper alignment and support. It helps keep parts stable so the appliance operates as intended. What it does

• Secures and supports an internal component to prevent movement or misalignment
• Replaces cracked, broken, or worn mounting points that allow rattling or improper part position
• Restores stable contact where a loose component causes intermittent operation or noise
• Fits a specific OEM location; use the part number to confirm exact application

• One replacement holder/mounting bracket

• Disconnect power and water before starting any repairs
• Inspect surrounding clips or fasteners and reuse or replace as needed—this part typically snaps or screws into place
• Handle plastic mounting parts gently to avoid cracking during installation

This interference capacitor reduces electrical noise and helps protect the appliance's control circuitry from voltage spikes. It's a direct-replacement noise suppressor used where EMI/RFI filtering is required for reliable operation. What it does:

• Suppresses electromagnetic and radio-frequency interference that can affect controls and electronics
• Helps prevent false signals or erratic behavior caused by electrical noise
• Supports stable operation of motors and electronic control boards
• Can reduce audible electrical noise or interference-related symptoms

• Disconnect power at the breaker before inspecting or replacing the capacitor
• Discharge the capacitor and avoid touching terminals; use insulated tools
• Verify wiring match and polarity before connecting

Replacement holder that secures internal components and accessories, restoring proper fit and preventing movement or rattling. Direct-fit design replaces a worn, cracked or broken holder to keep parts stable during normal operation. What it does

• Secures panels, racks or small internal components in place to prevent shifting.
• Restores correct alignment when a broken holder allows parts to sag or detach.
• Eliminates rattling or vibration caused by loose or damaged mounts.
• Helps maintain proper operation by keeping components positioned as intended.

• Disconnect power (and water supply if applicable) before starting repair.
• Remove any obstructing panels or accessories to access the holder; keep track of fasteners.
• Install the new holder in the same orientation; snap or fasten it until it seats securely—do not force or overtighten.

Includes screws.

This power module is the main electronic control board that supplies and regulates power to your appliance's circuits, restoring proper electrical control and allowing normal operation when the original board fails. What it does:

• Distributes and controls incoming power to key appliance components
• Helps prevent erratic operation caused by faulty voltage regulation
• Commonly replaced when the appliance won't power on or shows intermittent power loss
• Resolve control-related errors or complete lack of response from buttons/display

• One power module (main control board)

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Handle the board carefully and avoid contact with circuit traces; use anti-static precautions if available
• Basic disassembly of outer panels or console is typically required; keep track of screws and connectors

This flexible water hose routes water between internal components in your appliance. Replacing a worn or cracked hose restores a sealed, reliable water path to help prevent leaks and water-flow issues.

• Directs water between assemblies to maintain proper flow
• Helps keep the water path watertight to avoid leaks
• Can resolve symptoms like slow/failed draining, pooling water, or visible drips
• Replaces hoses that are brittle, cracked, kinked, or clogged

• Disconnect power and shut off water supply before servicing
• Place towels or a pan to catch residual water; note original routing
• Move over and secure existing clamps/seals; avoid kinks during routing
• Run a test cycle and check all connections for leaks