Cde 7000W Parts

This idler spring maintains proper tension on the dryer drum belt by keeping the idler pulley engaged. Replacing a weak or broken spring restores consistent drum rotation and helps prevent belt slippage and squealing during operation.

• Maintains belt tension by pulling the idler arm/pulley against the drum belt
• Helps the motor start and keep the drum turning smoothly
• Reduces belt slippage that can cause squealing or chirping
• Common symptoms of a failed spring: drum won't turn or turns intermittently; belt comes off or feels loose; loud squeal from idler area

• Disconnect power; for gas dryers, shut off the gas supply
• Access the idler assembly; relieve belt tension and note belt/spring routing before removal
• Attach the new spring to the same holes/orientation on the idler arm and base; verify belt path
• Rotate the drum by hand to confirm alignment and tension before reassembly

Seal assembly replaces the washer's front tub seal to prevent water from leaking around the cylinder, helping stop puddles under the machine and protecting internal components from water exposure. What it does:

• Forms a watertight seal between the front of the tub/cylinder and the outer housing.
• Helps stop leaks that occur during fill, wash, or spin cycles; replacement commonly resolves visible water at the front/base of the washer.
• Use when the seal shows cracks, tears, hardening, or other visible damage.
• Replacement restores proper sealing to help protect bearings and electronics from water intrusion.

• Disconnect power and turn off the water supply before servicing.
• Replacement typically requires front access and partial disassembly of the tub/cabinet; follow the manufacturer service manual and use appropriate tools.
• Clean and inspect the mating surfaces and the shaft for wear or contamination before installing the new seal.
• If you find bearing noise, oil residue, or extensive corrosion, consider replacing affected components.

This resistor assembly reduces voltage in the motor/blower circuit to provide lower speed settings on compatible appliances. A failed resistor commonly results in loss of one or more speeds or the fan/blower running only on high. What it does:

• Drops voltage to create low/medium speed settings where designed
• Helps the speed switch deliver distinct fan/motor speeds
• Resolve issues like only high speed working
• Address no low/medium speeds or inconsistent speed changes

• 1 resistor assembly

• Disconnect power before servicing and verify no voltage is present
• Mount in the original location/orientation to ensure proper cooling airflow
• Move wires one at a time to avoid miswiring
• Inspect and replace any heat-damaged connectors or wiring as needed

By Maytag. Color: white. Measures about 15 inches wide by 6 inches high by 3/8 of an inch deep. Both sides of this filter are the same thickness - 3/8".

This idler arm assembly keeps the dryer drum belt properly tensioned so the drum turns smoothly for even drying. Replaces a worn or broken tension arm to restore belt tracking and reduce noise. What it does:

• Maintains correct tension on the dryer drive belt so the drum rotates consistently
• Guides the belt for proper alignment and helps prevent slipping or rubbing
• Reduces squeaks, thumping, or belt-slap caused by a loose or damaged idler
• Works with the drive motor and belt to transfer rotation to the drum

• Disconnect power to the appliance before beginning any repair.
• Basic hand tools required; remove the front panel or access panel per your model's service instructions.
• Inspect the drive belt and pulley for wear while replacing the arm; replace if damaged.

This is a genuine replacement screw used to secure appliance panels and components, restoring proper fit and reducing vibration or rattling. Simple, low-cost fastener that helps keep parts aligned and stable. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Restores secure connections that can cause buzzing, rattling, or loose trim
• Replaces missing or stripped hardware to prevent further movement or wear
• Works where the original OEM screw was specified for fit and compatibility

• Disconnect power before working on electrical appliances to avoid shock
• Use the correct size driver to avoid stripping the head
• Install by hand initially to ensure proper threading, then snug—do not overtighten
• Retain removed hardware and compare to the new screw for correct fit before final assembly

This reed switch and magnet assembly senses door open/close to tell the appliance when to turn lights on and control door-activated features. It replaces a failed door sensor to restore proper door detection. What it does:

• Acts as the door sensor: magnet closes the reed switch when the door is shut.
• Controls interior light and other door-activated functions by signaling open/closed status.
• Commonly replaces a faulty switch when lights stay on or won't turn on with the door.
• Helps stop false "door open" behavior that can affect cooling or dispenser operation.

• Disconnect power to the appliance before starting any work.
• Handle the switch and wiring gently; avoid pulling on wires or connectors.
• Mount the switch and magnet so the magnet aligns closely with the switch when the door is closed.
• After installation, restore power and verify the light and door-activated functions operate correctly.

This stainless steel lower door handle replaces a damaged or worn handle to restore a secure grip and original look to the appliance. Designed to match factory fit and finish for straightforward replacement. What it does:

• Provides a sturdy replacement for cracked, bent, loose or cosmetically damaged lower door handles
• Restores proper gripping surface for opening and closing the door
• Matches factory finish to maintain the appliance's appearance
• Helps prevent further damage to the door from using a compromised handle

• Disconnect power to the appliance and empty the door area before starting work
• Handle attaches with factory screws or mounting hardware; retain existing fasteners unless new hardware is provided
• Do not overtighten screws—snug them to avoid stripping or cracking the handle or door