Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
If your range has a strong burning smell or won't power on, the terminal block may be heat-damaged. This insulated connector restores safe power flow.
Replaced it with the part I got from you. Read more
Black thermostat knob for oven temperature control. Replaces worn, faded, or broken knobs where lettering has rubbed off or plastic has cracked.
We ordered new knobs and a new burner unit which solved our problem even though our stove was purchased around 1987. Read more
Factory screw-and-washer fastener secures panels, brackets, and components. Replace stripped, rusty, or missing hardware for tight fit and proper alignment.
I removed the burners, which were rusted and needed some tapping.They were pretty stubborn to remove from the insert. I removed the spark igniters, which were rusted where they screwed into the burner and then removed the venturi tubes.. Once this was done, I installed the new igniters to the underside of the new burner. I then installed the burners, which only took simple placement and a quarter turn to lock them in. I then hooked up the igniter wire to the new spark igniters. The repair... Read more
Black control knob kit for range cooktops. Set of 4 knobs. Replaces worn, faded, or missing burner knobs with illegible markings. Double flat shaft design.
Downdraft stopped working? This blower wheel mounts on the motor to move air through your cooktop ventilation system. DIY replacement in 1-2 hours.
I replaced the downdraft fan and fan motor of my 25 year old JennAire C301 cooktop. The issue was getting the fan/motor assembly out in such a tight place. I had to first remove the fan cover, cut the wires, then the assembly came out. Putting back wasn't as tough although getting the cover back on (over the motor) was a bit of a strain. Wired it back, turned it on, and was thrilled. Now I'll replace the knobs and burners and we're back in business. Read more
Restores electrical connection in range control circuits. Replace when contacts are worn, pitted, or damaged causing arcing. Installs in ceramic receptacles.
I called the Appliance Parts Pro number and spoke with Susan who told me what to order and how to replace it. Read more
Grill element not heating or turning red? This cooktop grill element restores grilling function. Simple plug-in replacement takes under 30 minutes.
Ordered all the parts needed, replaced them and the Jenn Air worked just fine. Read more
Range indicator light assembly illuminates control panel displays. Replace when light fails or flickers. Verify fit with your model number.
Fix exhaust fan clunking or excessive vibration with this motor isolator grommet. Cushions the motor mount to reduce noise and prevent damage. Easy DIY fix.
Ordered three isolators and changed all of them. Sounds like new. Read more
Replace your broken or missing range clock knob. Mounts to the control panel for adjusting the built-in clock. Order a new knob if yours is cracked or worn.
Broiler not heating or browning food properly? This upper broil element restores intense top heat for even broiling. Takes 15-20 minutes to replace.
Fix intermittent or failed burner operation caused by burnt or loose wiring. This wire harness restores reliable connections. 5-minute repair once disassembled.
Replaced wire harness that is terminated in a contact-shoe in one of the two terminal blocks in the cooktop. Also replaced cracked burner-indicator lights as cooktop was disassembled to affect the terminal-block repair. All replacement parts fit properly and worked well. The greatest amount of time was disassembling and re-assembling the cooktop. Replacing the wire harness took less than 5 minutes once the range top was disassembled to allow access to the terminal block. Read more
Shoulder screw that secures oven components with a precise pivot or spacer point. Replace if missing, worn, or stripped to restore alignment and stability.
I had to remove the oven door, which I learned is made to come off without tools. Then took out the bottom by removing two screws and lifting. Removed the screws attaching the igniter, pulled wires thru back until I could get the connector and disconnect. When the new igniter arrived, I had to change the connector. I cut the one off the old one, and spliced to the new one using solder and shrink tubing. Just reverse the procedure to install. I replaced the screws with new ones. Read more
Metal support bracket that hooks into slots on the bottom of grill rock plates. Replace if bent, corroded, rusty, or missing to secure plate.
8-16 x 3/8 inch screw fastener for dryers. Secures baffles to drum and various internal components. Replace if missing, stripped, or damaged.
Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.