Dacor Pgr30s Parts

The Broil Solenoid is an OEM part for Bosch ranges. The solenoid receives a signal from the range’s control board and operates based on internal coil and plunger mechanisms. When activated, it opens the gas valve or switches electric current to energize the broil element positioned above the oven cavity.

Symptoms of a faulty broil solenoid can include:

• Inability to initiate or sustain broiling despite selecting the function
• Delayed broil ignition or shutoff not matching timer settings
• Gas smell or abnormal burner activity from improper valve control

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

A Trident-style surface burner head that directs gas to the cooktop burner for an even, controlled flame. Replaces a worn or damaged burner head to restore consistent heating and safe operation. What it does:

• Directs and shapes the gas flame for proper cooking heat
• Restores even flame pattern when the original burner is warped or clogged
• Helps eliminate weak or irregular flames caused by damaged ports
• Works with the burner base and cap to maintain stable ignition

• Turn off the appliance and shut off gas/electric power before servicing
• Remove grates and burner cap, then replace the burner head; reassemble in reverse order
• Clean mating surfaces of debris or corrosion before installation for proper fit

This pressure regulator controls and stabilizes incoming water pressure to the appliance, helping maintain consistent operation and protect internal valves and seals. Fits systems that use a 3/4 inch inlet regulator. What it does:

• Reduces high incoming water pressure to a safe, steady level for the appliance
• Prevents pressure-related leaks, valve chatter, and premature wear on seals
• Helps maintain consistent water flow for reliable cycles and operation
• Commonly replaced when irregular pressure, humming valves, or water leaks occur

• One pressure regulator (3/4 in.)

• Turn off water supply and power to the appliance before starting; relieve system pressure first
• Inspect connection fittings and seals; use appropriate thread sealant if required by the OEM
• Tighten to manufacturer torque recommendations and check for leaks after restoring water

This replacement tube restores proper routing for liquids or airflow in compatible appliances, helping maintain normal operation and prevent leaks or flow issues. It's a direct-fit part when your appliance requires the OEM tube. What it does:

• Replaces a worn, cracked, or damaged routing tube to stop leaks and restore proper flow
• Guides water, drain, or air where the original tubing was installed to maintain system function
• Helps prevent intermittent failures caused by pinched, split, or brittle tubing
• Matches OEM fit and routing to keep adjacent components aligned

• One replacement tube

• Verify the part number and orientation against the appliance diagram before installing
• Turn off power and water supply to the appliance before starting work
• Use appropriate tools and retainers; avoid kinking or over-bending the tube during installation

This compression sleeve seals 3/8-inch refrigeration or water tubing where a compression fitting is used, restoring a tight, drip-free connection. It's a simple replacement to stop leaks and ensure a secure joint. What it does:

• Acts as the ferrule inside a compression fitting to compress against tubing and create a seal
• Restores a worn or flattened sleeve that causes leaks at nuts or fittings
• Used with a matching compression nut and fitting to secure 3/8" tubing
• Commonly replaced when connections leak, weep, or fail to hold pressure

• One compression sleeve sized for 3/8 in. tube

• Turn off and depressurize the system (water or refrigeration) before removing fittings
• Cut tubing square and deburr before installing the sleeve for best seal
• Slide the nut then the sleeve onto the tube, seat against the fitting, and tighten to manufacturer torque
• Inspect the joint for leaks after pressurizing and retighten if needed; replace sleeve if damaged during installation

The temperature sensor is an electronic probe that monitors internal appliance temperature and reports it to the control so it can regulate operation. Replacing a failed sensor restores more accurate temperatures and can clear temperature-related error codes. What it does:

• Senses internal temperature via resistance changes and sends the signal to the electronic control
• Helps the control reach and maintain the set temperature during operation
• Common failure symptoms: too hot/cold, won't reach set temp, long/short cycles, temperature error codes
• Can cause preheat to stall or the unit to shut off early (model dependent)

• Includes: 1 temperature sensor

• Disconnect power at the breaker before servicing
• Location and access vary by model; typically mounts with screws or a clip and connects to a 2-wire harness
• Handle the connector and wiring carefully; route and secure away from hot or moving parts
• After installation, clear stored errors and run a test cycle to proper readings

This surface burner head replaces a worn or damaged gas cooktop burner to restore reliable ignition and more even heat across cookware. Ideal when a burner is cracked, warped, or producing inconsistent flames during cooking. What it does:

• Directs gas flow to create a stable flame for cooking
• Helps restore even heat distribution for consistent cooking results
• Addresses symptoms such as weak or inconsistent flames, burner that won't light, or visible damage to the burner surface
• Works with the existing cooktop ignition and burner cap to resume normal operation

• Turn off gas supply and electrical power to the appliance before starting; allow all parts to cool completely
• Remove grates and burner caps, lift out the old burner, and seat the replacement so ignition ports align properly
• Avoid scratching porcelain/enamel surfaces; use gentle hand tools and follow manufacturer torque recommendations for screws

A slimline control knob that replaces worn or damaged range/oven knobs to restore a secure grip and precise temperature/setting control. Designed to match original fit and feel for reliable operation. What it does:

• Replaces a broken, cracked, or stripped control knob so settings can be changed safely and accurately
• Fits the appliance's keyed/stamped shaft to provide a secure, non-slip connection
• Helps prevent accidental setting changes by providing a firm tactile grip
• Restores visual finish to the cooktop or control panel

• Disconnect power (and gas supply if applicable) before servicing controls
• Align the knob's internal spline with the valve shaft and push straight on until seated; do not force
• Test operation after installation to confirm proper seating and control response