Dbxr463ed2ww Ge Dryer Parts
Genuine Ge part
By: Ge
Part Number: WE13M39
Metal bracket that secures the dryer motor and blower assembly in place. Replace if your mounting bracket is cracked, broken, or causing loose components.
More
$39.45
- Compare At:
-
$46.95
- You Save:
-
$7.50
Genuine Ge part
By: Ge
Part Number: WE14X20421
Replaces a cracked, rusted, or disconnected exhaust duct that routes hot air from your dryer to the home vent. Restores proper airflow and venting.
Do-It-Yourself Stories from Customers like You
Exhaust pipe was rusted Jack L. • Annandale , VA • April 10, 2015
Removed front of dryer and back access plate allowing me to see that the pipe just slipped over the blower. A small tab in the back cover was inserted inside the left side of the pipe and when I straightened the tab I could move the pipe to the right and then straight out. Replacement of the pipe was the reverse. The new pipe did not have a hole for the tab, so I bent the tab to its original position, and rested the pipe against the tab. The new pipe had a rear flange that kept it in place....
Read more
More
$26.61
- Compare At:
-
$31.93
- You Save:
-
$5.32
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE1X921
Secures your dryer motor to the cabinet to reduce vibration and noise. Replace if motor shifts or rattles during operation. Confirm fit with your model.
More
$38.63
- Compare At:
-
$45.97
- You Save:
-
$7.34
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE21X20562
Replacement drum assembly for dryers. Installs as the rotating cylinder that tumbles clothes. Needed when drum is cracked, damaged, or worn out.
More
$472.75
- Compare At:
-
$549.30
- You Save:
-
$76.55
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE2M202
Replacement mounting screw for dryer panels and components. Needed when original screws are stripped, missing, or damaged during repair or maintenance.
More
$8.41
- Compare At:
-
$10.09
- You Save:
-
$1.68
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE2M98
Mounting screw for dryer installation and assembly. Replace this hardware if stripped, missing, or damaged during dryer maintenance or repair work.
More
$7.57
- Compare At:
-
$9.08
- You Save:
-
$1.51
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE19M1419
Right-hand side dryer endcap in snow white finish. Replaces cracked, broken, or missing endcaps to restore proper drum assembly and appearance.
Do-It-Yourself Stories from Customers like You
No heat broke element. Glenn`` L. • Bradenton , FL • December 13, 2020
Replace element coil and thermostats.
Read more
More
$19.95
- Compare At:
-
$25.74
- You Save:
-
$5.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE1M527
Front leveling leg bracket for dryers. Secures the adjustable front leg to the dryer base. Replace if cracked, bent, or broken to restore stability.
More
$6.95
- Compare At:
-
$9.69
- You Save:
-
$2.74
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE20M301
$121.54
- Compare At:
-
$124.53
- You Save:
-
$2.99
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE20M393
White side panel for dryer exterior cabinet. Replacement for cracked, dented, or damaged side body panels. Restores clean appearance to dryer.
More
$111.37
- Compare At:
-
$132.53
- You Save:
-
$21.16
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE20M398
$71.37
- Compare At:
-
$73.54
- You Save:
-
$2.17
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WE2M96
Do-It-Yourself Stories from Customers like You
Noisy drum pulley or motor Peter K. • Hawthorn Woods , IL • March 08, 2017
The video was quite helpful with step by step instructions. I ordered a belt and idler pulley before dismantling assuming they were the issues. Belt was easy and fit fine but I did not realize the idler pulley was secured with a special fastener, push on cap nut, that would be damaged if removed. So I left it in place. Original pulley seemed fine so I reassembled the dryer. Restarted and of course the noise remained. I ordered the push on fastener and also the drum bearing as a precaution. ...
Read more
More
Genuine Ge part
By: Ge
Part Number: WH01X10106
The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.
Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.
Symptoms of a bad Knob Clip include:
- The control knob is loose or falls off the panel easily.
- Difficulty in adjusting settings due to a loose knob.
- The knob does not stay in place or slips when turned.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
I was unable to select a cycle knob wouldn't advance and stay Tamara I. • Hatfield , PA • September 23, 2014
I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any...
Read more
More
Genuine Ge part
By: Ge
Part Number: WE5M48
Do-It-Yourself Stories from Customers like You
Plastic around lint chute was breaking apart. Slide bearings,front support bearing and foam seal needed to be replaced Jack L. • Shirley , NY • February 02, 2024
Easy peezy. Just follow the video. Great company and great prices too.. and very helpful.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE10X20468
Do-It-Yourself Stories from Customers like You
Timer hard to turn and was braking the knobs. Claude V. • Lehigh Acres , FL • March 17, 2018
Replaced new parts with the new one, swapping one wire at the time.
Read more
More
Genuine Ge part
By: Ge
Part Number: WE13X20394
This motor plate is the stamped metal mounting plate that secures the motor assembly and keeps it aligned for smooth operation. It restores proper motor positioning and reduces vibration-caused noise or wear. What it does:
- Provides a stable mounting surface for the motor assembly
- Maintains motor alignment to ensure smooth shaft rotation
- Helps reduce excess vibration and noise from a loose or damaged motor support
- Supports related components so belts and pulleys track correctly
What's included: One motor plate Install notes:
- Disconnect power before starting any repair to avoid shock or injury
- Installation requires basic hand tools and access to the motor compartment
- Verify motor and surrounding hardware are undamaged; replace any worn fasteners
More