Dfe28jmkfes Serial Parts

This E-clip is a small metal retaining ring that secures shafts, pins, and other round components in appliance assemblies, helping keep moving parts properly seated and preventing unwanted disassembly. What it does:

• Clips onto a shaft or pin to hold components in place and maintain alignment
• Prevents parts from sliding off during operation, reducing noise and wear
• Common symptom: loose or rattling components where a retaining clip is missing or damaged
• Common symptom: assembly falling apart or not engaging correctly due to a failed clip

• One E-clip

• Small part — use needle-nose pliers or snap-ring pliers to install and keep fingers clear
• Disconnect power and/or water to the appliance before servicing to avoid injury
• Wear safety glasses to protect against the clip snapping during installation

This trough drain collects and channels defrost water from the freezer evaporator to the drain tube, helping prevent pooled water and icing in the freezer compartment. Designed to match OEM fit and function for a direct replacement. What it does

• Captures defrost meltwater from the evaporator area and directs it to the drain system
• Helps prevent water pooling and ice buildup around the evaporator and freezer floor
• Restores normal defrost drainage when original trough is cracked, warped, or clogged
• Works with the freezer's drain heater and drain tube to keep water flowing during defrost cycles

• One trough drain

• Remove power to the appliance before accessing the evaporator/freezer cavity
• Replacement may require partial disassembly of interior liners, shelves or evaporator cover; follow OEM service instructions
• Inspect and clear the drain tube and drain heater when replacing the trough to ensure full system function

This guide roller is the replacement wheel that supports and guides the refrigerator vegetable/crisper pan, helping the drawer slide properly and stay aligned for reliable access. Designed to restore smooth, stable drawer movement. What it does:

• Supports the vegetable/crisper pan and rides in the drawer track to keep the drawer aligned.
• Reduces binding or catching when opening and closing the drawer.
• Replaces worn or broken rollers that cause the drawer to tilt, jam, or make scraping noises.
• Helps maintain even weight distribution so the drawer opens and closes reliably.

• Disconnect power to the refrigerator before beginning any repair.
• Remove the vegetable/crisper pan/drawer to access the roller and replace the old roller with the new one.
• Use basic hand tools as required; follow OEM instructions for reassembly.

This gasket seals the fan-front housing in the appliance to help maintain proper airflow and reduce air bypass. Replacing a worn gasket restores a tight seal for more consistent cooling and quieter operation. What it does:

• Seals the fan/front housing to prevent air leakage that can disrupt airflow and cooling
• Cushions the fan assembly to help reduce vibration and noise caused by a loose or damaged seal
• Helps maintain proper circulation so the refrigeration system can run efficiently
• Can prevent moisture buildup and reduce frost in the fan area when sealing is restored

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove access panels or shelving as needed to reach the fan housing; keep hardware for reassembly
• Inspect the mating surfaces and clean away debris before installing the new gasket for a proper seal
• Repair those before installing the gasket

This cover connector secures the fan housing and wiring in the refrigerator's fan assembly, helping protect components and maintain proper airflow. It's a direct-fit replacement designed to restore correct fan enclosure alignment. What it does

• Holds the fan housing and wiring connectors in place to prevent rubbing or disconnection
• Protects fan assembly wiring from damage and helps maintain reliable airflow
• Can address symptoms such as intermittent fan operation, unusual fan noise from misalignment, or airflow-related cooling issues
• Works as part of the fan enclosure to keep components positioned for proper function

• Disconnect power before beginning any service to avoid shock or injury
• Installation typically requires removing the fan housing or access panel; handle plastic parts carefully to avoid breaking tabs
• Inspect adjacent wiring and fan blades for damage while replacing the connector

The Basket Bottom Asm is an OEM part for GE refrigerators. This assembly is specifically designed to fit in the bottom freezer compartment, providing a convenient and organized storage solution for your frozen foods.

A bad bottom freezer basket assembly can occur due to wear and tear, accidental damage, or other factors. If you notice symptoms such as broken wires, a loose fit, or difficulty in sliding the basket, it may be time to replace it with a new one.

Symptoms of a bad bottom freezer basket assembly include:

• Broken wires
• Loose fit in the freezer compartment
• Difficulty in sliding the basket in and out

Improve your freezer storage and organization by replacing the faulty bottom freezer basket assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This door switch harness connects the door switch to the cabinet wiring to restore proper door-open/close signaling. It replaces a damaged or worn harness to help the appliance detect door position and enable interior lights or control features. What it does:

• Provides the electrical connection between the door switch and appliance wiring harness
• Restores interior light and control responses when the door opens or closes
• Replaces frayed, cracked, or disconnected wiring that can cause intermittent power or no light
• Helps eliminate clicking, dead lights, or controls that don't respond to door position

• One door switch wiring harness

• Disconnect power before beginning any repair to avoid shock; this is a high-priority safety step
• Handle connectors carefully; match connector shapes and wire colors when replacing
• May require removal of door gasket or inner door panel depending on appliance model

2 wire insulator.

A short 8-32 x 3/8 hex washer head screw used to secure small appliance panels and components. Simple replacement for stripped or missing fasteners to restore proper fit and prevent rattles or loose parts. What it does:

• Secures panels, brackets, and small assemblies in place
• Helps eliminate vibration-related noise from loose parts
• Replaces missing, damaged, or corroded screws to restore proper alignment
• Fits standard 8-32 threaded holes requiring a 3/8" length screw

• One 8-32 x 3/8 hex washer head screw

• Use the correct 8-32 driver to avoid stripping the head
• Tighten snugly but avoid over-torquing to prevent thread damage
• Disconnect power and follow appliance safety procedures before accessing internal components
• Replace only like-for-like fasteners in load-bearing or safety-critical locations

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation

A 1/4" clip connector that secures a quick-disconnect terminal to appliance wiring for a reliable electrical connection. Replaces worn or loose connectors to restore consistent contact at spade terminals. What it does:

• Provides a secure spade/quick-disconnect connection between wires and component terminals
• Restores power to components when original connector is corroded, cracked, or loose
• Helps prevent intermittent operation caused by poor terminal contact
• Designed for use on appliance wiring where 1/4" quick-disconnects are required

• One 1/4" clip connector

• Always disconnect power to the appliance before inspecting or replacing electrical connectors
• Remove the old connector and ensure wire size and terminal type match this 1/4" connector before installing
• Fully seat the terminal and ensure a snug, non-wobbly fit; avoid forcing mismatched terminals
• If wiring is damaged, replace or repair the wire per the manufacturer's service instructions

This PCB cover assembly protects and secures a range of control electronics, keeping the control board safe from dust, debris and accidental contact. It restores the original housing and helps maintain reliable board operation. What it does:

• Shields the control PCB from moisture, crumbs and physical damage
• Helps prevent shorts caused by loose wires or foreign objects
• Keeps wiring and connectors routed and secured to reduce strain
• Restores proper fit and spacing over the control board for normal operation

• One PCB cover assembly

• Disconnect power to the appliance before servicing to avoid shock
• Handle the control board and connectors carefully; avoid touching components and use anti-static precautions if available
• Use basic hand tools to remove mounting screws/clips and secure the cover in the original position
• If you see damaged wiring or a compromised control board, replace components as needed before reassembly

This left-side support secures and stabilizes the refrigerator door/side assembly for proper alignment and function. Replacing a worn or damaged support helps reduce door sag, improve sealing, and stop rubbing or unusual noises. What it does:

• Supports the left side of the door/side assembly to maintain proper alignment
• Prevents door sag that can cause poor sealing or uneven closing
• Reduces rattling or rubbing caused by a loose or broken support
• Restores proper fit to help the gasket seal and temperature control

• Disconnect power and empty the door area before starting any repair
• Follow OEM instructions for door removal/realignment; some screws/fasteners must be removed and re-torqued
• Handle adjacent trim or glass carefully to avoid damage

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged