Eg385px60 Parts

An illuminated control knob that replaces a worn or missing knob on compatible cooking appliances. It restores smooth, accurate control and provides a clear, lighted indicator at the knob so settings are easy to confirm.

• Provides the interface to turn and set the control valve or switch
• Integrated light window works with the appliance's lighting circuit to indicate operation
• Direct replacement for cracked, stripped, loose, or missing knobs
• Symptoms include slipping/spinning on the shaft, difficulty adjusting settings, or a damaged knob cap or lens

• Disconnect power to the appliance before servicing; shut off gas supply if applicable
• Pull the old knob straight off the control stem—do not twist the stem
• Align the new knob with the stem and press firmly until fully seated
• If your model uses a lighting lead in the knob, transfer/connect it per the service manual

This dual burner gasket seals the dual burner assembly to the cooktop surface, keeping spills out and the burner properly supported. Replacing a worn gasket restores a snug fit and consistent, reliable burner operation.

• Creates a tight barrier between the dual burner base and the cooktop
• Helps maintain correct burner height and alignment for stable operation
• Limits liquid and debris intrusion that can cause corrosion or binding
• Common signs: visible cracking/flattening, burner not sitting flush, liquids seeping below, or the burner shifting during use

• Disconnect power and shut off the gas supply; allow the appliance to cool completely
• Remove grates, caps, and burner components to access and remove the old gasket
• Clean mating surfaces before installation; do not stretch or twist the new gasket
• Reassemble and verify the burner sits flat and operates normally

This service spill tray is a molded replacement tray that sits under the appliance to catch and channel small water leaks and drips, helping protect the cabinet and floor from moisture damage. What it does:

• Collects and directs minor water from leaks, condensation, or ice maker/defrost drip
• Prevents water from pooling under the appliance and reaching flooring
• Replaces cracked, warped, or missing trays that allow leaks to spread
• Helps identify and contain source of slow leaks during diagnosis

• One spill tray (center, 14 x 24 in.)

• Disconnect power (and water supply if applicable) before beginning service
• Remove access panels or components as needed to access the tray; keep fasteners for reassembly
• Verify correct orientation and seating of the tray before restoring power
• If tray was damaged by a leak, repair the underlying cause before installing replacement

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

A single service screw used to secure appliance components such as control boards, brackets, and panels. Replaces worn or missing fasteners to restore proper fit and stop parts from shifting. What it does:

• Secures internal components and mounting brackets to prevent movement and vibration
• Holds control boards, panels, or housings in place for reliable operation
• Helps prevent loose parts that can cause rattling or intermittent contact
• Small, OEM-style fastener sized for precision appliance assemblies

• One service screw

• Disconnect power to the appliance before servicing
• Use the correct screwdriver to avoid stripping the head
• Do not overtighten; snug to manufacturer torque or until secure
• Keep removed screws organized to ensure all are returned during reassembly

This service regulator controls low-pressure natural/LP gas flow to the appliance, restoring proper burner and oven performance. It replaces a failed regulator to help maintain steady flame and consistent cooking temperatures. What it does:

• Regulates incoming low-pressure gas to the appliance's burner system for stable flame performance
• Helps correct weak, uneven, or sputtering flames and inconsistent oven heating
• Prevents pressure-related cycling or flame blowout when functioning properly
• Works as the gas pressure control component for the appliance's gas valve assembly

• Turn off the gas supply and electrical power before servicing
• Inspect fittings and use a gas leak tester after installation; do not use open flame to check for leaks
• Do not modify the part; replace with the exact OEM-specified regulator

This burner base assembly replaces the oven's damaged or worn burner base to restore stable combustion and proper heat distribution for gas ranges. It fits original equipment configurations and mounts where the burner connects to the range. What it does:

• Provides the appliance's burner mounting and gas flow interface for ignition
• Helps restore even flame pattern and consistent heating across the burner
• Replaces cracked, warped, or corroded burner bases that cause poor performance
• Can resolve ignition and flame stability issues when base damage is the cause

• Disconnect the appliance from gas and power before servicing.
• Use proper gas-line fittings and check all connections for leaks after installation.
• Inspect surrounding seals and gaskets; replace if damaged to maintain proper operation.

This right-hand spill tray replaces a damaged or cracked drip trough to help catch and direct liquid away from components, reducing mess and preventing minor water-related issues. Fits the original service location and restores proper drainage. What it does:

• Replaces a deteriorated or cracked spill/drip tray to restore containment of spills and condensation
• Directs water toward the drain path to help prevent pooling near components
• Helps reduce odors and mildew risk from standing water in the cabinet area
• Useful when tray is warped, split, or missing fasteners that cause leaks

• One right-hand spill tray

• Designed as a direct replacement for the indicated service side; no modification normally required
• Disconnect power and remove any stored items before servicing for safety
• Handle edges carefully and support surrounding panels to avoid damage during removal/installation
• If water-related issues persist after replacement, inspect drain lines and seals.

This left-hand spill tray collects and contains spills or drips inside the cabinet to help protect internal components and finishes. It restores the appliance's ability to channel liquids away from sensitive areas. What it does:

• Catches and contains water, juice, and other liquid spills inside the compartment
• Prevents pooled liquid from running onto electrical components or insulation
• Helps reduce odors and mold risk by keeping leaks contained and easier to clean
• Restores proper liquid routing when the original tray is cracked, warped, or missing

• Disconnect power to the appliance before servicing
• Remove any shelves, bins, or coverings that block access to the tray
• Handle tray carefully to avoid cracking; confirm left-hand orientation before final placement
• If you see persistent leaks, inspect nearby water lines, ice maker, and seals for damage

This dual burner base assembly replaces the damaged or worn support that holds two cooktop burners in place, restoring proper alignment and stable burner seating for safer, more consistent heating. What it does

• Secures and centers two burner elements so they sit flat and stable
• Prevents burner wobble and misalignment that can cause uneven heating
• Provides the structural support for burners and related mounting hardware
• Works with original cooktop components to maintain proper burner positioning

• Disconnect power (and gas if applicable) to the appliance before starting work.
• Remove the cooktop or control panel per the manufacturer's service instructions to access the burner base.
• Inspect nearby components (burner caps, elements, clips) and replace any damaged parts for best results.

This service end cap is a chrome-finish replacement trim piece that restores the appliance's finished appearance and protects the exposed end of the control/trim area from dirt and damage. It matches OEM fit and finish for a seamless repair. What it does:

• Covers and protects the exposed end of the control/trim assembly to prevent dirt, moisture, and wear
• Restores the appliance's original appearance where the end cap is cracked, scratched, or missing
• Helps maintain a secure edge on the control/trim area for proper alignment
• Simple cosmetic replacement to improve appearance after panel or control repairs

• One chrome-finish service end cap

• Disconnect power to the appliance before starting any work
• Installation typically involves removing adjacent trim or a few fasteners; handle trim pieces gently to avoid damage
• Align tabs and clips, then press or fasten the end cap into place without forcing