Er48dsch Parts

This side service trim is a factory-style replacement trim piece for the refrigerator door edge that restores appearance and a finished seal area. It helps keep the door edges looking correct and supports proper door closure. What it does:

• Replaces a damaged, cracked or missing side trim piece on the refrigerator door
• Helps maintain a finished edge to prevent snagging and reduce air infiltration at the door seam
• Restores proper part alignment so the door closes and seals as designed
• Matches OEM fit and appearance for a factory-correct repair

• One (1) side service trim piece

• Designed for direct replacement; inspect mounting clips and fasteners and replace if damaged
• Power off and remove food from door area as needed for safe access
• Use caution to avoid scratching adjacent panels during removal/installation
• If trim does not align, verify correct side (left/right) for your door and reference service diagram

This Torx-head service screw replaces a missing or damaged #10-32 x 2 inch screw used to secure appliance panels and components, restoring proper fit and reducing noise from loose parts. What it does:

• Secures panels, brackets or service access covers to restore proper alignment
• Prevents rattling, vibration noise and movement caused by loose fasteners
• Replaces stripped, bent or missing service screws for safe operation
• Matches OEM thread size and length for a correct fit when listed for your model

• Use the correct Torx driver and proper-sized socket or bit to avoid cam-out
• Tighten until snug; do not overtighten to prevent stripping threads or damaging panels
• Disconnect power and follow manufacturer safety guidance before accessing internal components

A replacement service screw used to secure appliance panels and components. Durable fastener sized for common service points, making repairs and panel reassembly quick and reliable. What it does:

• Secures trim, access panels, brackets or small components during service and reassembly
• Commonly used where a shallow truss/wafer head is needed to sit flush without catching
• Helps stop rattling or loose parts caused by missing or stripped screws
• Matches OEM fit for compatible assemblies when the OEM part number is required

• One service screw (#8 x 1/2" truss/wafer head) as specified by the OEM part number

• Use the matching size driver to avoid cam-out and head damage
• Hand-start fasteners to avoid cross-threading; tighten until snug — do not overtighten
• Wear safety glasses and disconnect power before working on electrical appliances
• If a screw threads into plastic or thin sheet metal, consider replacing with the same OEM screw to preserve original threads

A single service screw used to secure appliance components such as control boards, brackets, and panels. Replaces worn or missing fasteners to restore proper fit and stop parts from shifting. What it does:

• Secures internal components and mounting brackets to prevent movement and vibration
• Holds control boards, panels, or housings in place for reliable operation
• Helps prevent loose parts that can cause rattling or intermittent contact
• Small, OEM-style fastener sized for precision appliance assemblies

• One service screw

• Disconnect power to the appliance before servicing
• Use the correct screwdriver to avoid stripping the head
• Do not overtighten; snug to manufacturer torque or until secure
• Keep removed screws organized to ensure all are returned during reassembly

This burner base assembly replaces the oven's damaged or worn burner base to restore stable combustion and proper heat distribution for gas ranges. It fits original equipment configurations and mounts where the burner connects to the range. What it does:

• Provides the appliance's burner mounting and gas flow interface for ignition
• Helps restore even flame pattern and consistent heating across the burner
• Replaces cracked, warped, or corroded burner bases that cause poor performance
• Can resolve ignition and flame stability issues when base damage is the cause

• Disconnect the appliance from gas and power before servicing.
• Use proper gas-line fittings and check all connections for leaks after installation.
• Inspect surrounding seals and gaskets; replace if damaged to maintain proper operation.

This burner ring cap base provides the support and alignment for a gas cooktop burner cap, helping direct the flame for consistent heating and safe operation. It replaces damaged or warped bases that prevent proper burner seating. What it does:

• Supports and centers the burner cap so the flame is properly directed
• Restores even heating and stable flame pattern when the original base is cracked or warped
• Helps maintain correct burner-to-cap spacing for reliable ignition and simmer control
• Prevents burner cap wobble that can cause uneven cooking or noisy flames

• Turn off the gas supply and power to the appliance before starting any work
• Remove burner cap and grate to access the base; ensure all surfaces are clean and dry before installing
• Fit the new base into the burner assembly and ensure the cap seats evenly and securely

This wire harness routes power between the oven's control and the bake/broil elements to enable consistent heating. It replaces a damaged or worn harness to restore reliable bake and broil function. What it does:

• Connects bake and broil heating elements to the oven control and terminal block
• Provides secure wiring paths and insulated connections to prevent shorts
• Commonly replaced when bake or broil functions fail or work intermittently
• Helps stop issues like no heat, uneven heating, or tripped breakers caused by damaged wires

• Always disconnect power to the appliance before starting any repair
• Inspect connectors and terminals for corrosion or damage; replace if necessary
• Route harness to avoid contact with sharp edges or high-heat surfaces

This service door hinge kit replaces a worn or damaged hinge to restore proper door alignment and secure closing on the appliance. It helps stop door sagging and reduce gaps that let cold air escape. What it does:

• Replaces the pivot point that supports and guides the door for smooth opening and closing
• Restores proper door alignment to prevent rubbing, gaps, and poor sealing
• Addresses symptoms like a sagging or drooping door, noisy or stiff movement, and doors that won't close fully
• Includes the hinge components needed for mounting and stabilization

• High-level replacement; access may require removing the door and shelving
• Disconnect power and empty the door area before starting to avoid injury or damage
• Handle metal parts carefully to avoid cuts; wear gloves and eye protection
• After installation, check door alignment and gasket contact; adjust hinge mounting if needed for an even seal

This convection heating element provides the heat source used with the oven's convection system to circulate hot air for faster, more even cooking. Replaces a failed or burned-out convection element to restore convection bake performance. What it does:

• Heats during convection mode so air pushed by the fan cooks food evenly
• Restores proper convection temperature when the element is open or degraded
• Helps eliminate cold spots and inconsistent baking when functioning correctly
• Commonly replaced when the oven shows no convection heat or uneven cooking

• Disconnect power to the appliance at the breaker before starting any repair.
• Handle the element and terminals carefully to avoid bending or damage.
• Verify correct connector fit and secure all terminal connections before restoring power.

This oven bake gasket seals the gap between the oven door and cavity to help retain heat and maintain even cooking. It replaces a worn or damaged seal for improved temperature performance and reduced heat loss. What it does:

• Seals the oven door to help keep heat inside the cooking cavity
• Reduces heat escape that can cause uneven baking or longer cook times
• Helps prevent hot air and smoke from leaking around the door
• Replaces torn, flattened or brittle gasket material that no longer seats correctly

• One bake gasket (single oven door seal)

• Disconnect power (and gas if applicable) and allow the oven to cool before servicing
• Handle the gasket carefully and wear gloves to avoid cuts from metal edges or glass
• Ensure gasket is seated fully into the channel and trim/fit per OEM guidance; door or inner panel removal may be required