Fcrg3062as Parts

The LP Conversion Kit with Instructions is an OEM replacement part for Frigidaire gas appliances. This kit is designed to convert a natural gas appliance to operate with liquid propane (LP) fuel. It includes all necessary components and instructions for a safe and effective conversion, ensuring optimal performance with propane.

Causes for needing an LP conversion kit typically include a change in the type of gas supply, such as moving to an area where propane is the primary fuel source. Proper installation is crucial to maintain safety and efficiency during operation.

Symptoms indicating the need for this kit include:

• The appliance is not functioning due to an incompatible gas type
• Incorrect or inconsistent burner flames
• Relocation to an area with propane-only gas service

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Lens is an OEM component for Frigidaire freezers. It acts as a transparent cover and protective barrier for the freezer compartment lights. Crafted for durability and clarity, the lens avoids frost and minimizes condensation while allowing visibility inside the freezer.

Causes of a bad lens can include deep scratches or cracks developing over time from repeated wiping or exposure to chemicals like frost removers.

Symptoms of a bad freezer lens include:

• Cloudiness, fogginess, or smears inhibiting internal visibility
• Cracks or breaks compromising the protective barrier
• Distorted views make it difficult to assess food levels
• Diffused lighting with shadows instead of a clear view

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This stainless 30-inch door handle restores a secure, comfortable grip and a clean, factory look to the door. Use it when the original handle is loose, cracked, missing, or cosmetically damaged.

• Replaces a damaged, wobbly, or missing door handle to restore normal opening and closing
• Addresses symptoms like a loose or rattling handle, flexing under pull, or visible wear
• Stainless finish matches the original appearance on compatible units
• Sized to the manufacturer's 30-inch configuration for proper fit

• Disconnect power and allow hot surfaces to cool before servicing
• Support the door; on some models, removing the door provides better access to handle screws
• Transfer any trim/end caps and reuse existing mounting screws per your model's instructions
• Tighten screws evenly; do not overtighten to avoid damaging the door skin or glass

This medium crown burner sits on the gas cooktop/range burner to shape and distribute the flame for even heating. Replacing a worn or damaged crown restores reliable ignition and a consistent flame pattern on the medium-output burner.

• Distributes gas evenly around the burner for steady, uniform heat
• Works with the igniter for reliable lighting when properly seated
• Helps protect burner ports from spills and debris
• Helps with uneven or yellow flames, delayed ignition, inconsistent lighting, or visible cracks/warping

• Disconnect power and shut off gas; allow the surface to cool completely
• Remove the old crown and clean the mating surfaces
• Align the new crown with any locator pins/notches and seat it flat; if screws are present on your model, tighten gently and evenly
• Restore gas/power and test for proper ignition and flame pattern

The Control Board is an OEM part fpr Frigidaire wall ovens and ranges. As the central processing component, it controls critical functions including temperature regulation, cooking modes and timer programming.

Causes can involve regular wear over multiple heating cycles, exposure to moisture or direct power fluctuations over time.

Symptoms of a faulty control board include:

• Inability to adjust or maintain set oven temperatures
• Failures in convection, broil or bake elements cycling on/off
• Non-functional timer, clock or display screens
• Error codes or safety lockouts appearing

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This factory-assembled door restores a secure, proper closure on your appliance. Replace a damaged, bent, or non-latching door to bring back safe operation and a clean, factory fit.

• Provides the complete hinged door structure that closes and latches the appliance
• Ensures proper engagement of door switches/latches so the unit operates only when closed
• Maintains correct alignment around the opening for reliable performance
• Replace if the door is cracked, warped, misaligned, won't close or stay shut, or the unit doesn't recognize the door is closed

• Disconnect power before servicing; wear cut-resistant gloves to handle edges
• Support the door during removal/installation; use a second person for larger/heavier doors
• Transfer any model-specific hardware (hinges, screws, trim) from the original door as required
• After installation, check alignment and latch operation; adjust per service information if needed

The Cap-Burner is an OEM replacement part for Frigidaire cooktops. It is a component located at the top of each burner element on the cooktop. The cap-burner sits directly over the burner element to distribute and maintain heat levels evenly across the heating surface. 

Causes of a bad cap-burner can include warping or distortion from excessive heat exposure over time. Wet or sticky messes can also lead to clogging or blockages.

Symptoms of a bad cap-burner include: 

• Uneven or inefficient heating of pots and pans placed on the burner surface
• Hot spots or areas of excessively high heat 
• Burner elements that do not ignite or power on as expected
• Smoke or burning smells coming from below the cap-burner

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Surface Burner Cap is an OEM part for Frigidaire ranges. It fits over the surface burner, providing a protective cover while ensuring proper gas flow and flame distribution.

A bad surface burner cap can be caused by wear and tear, damage, or improper cleaning. When the burner cap becomes faulty, it can result in issues such as uneven flames, inefficient heating, or difficulty in maintaining a consistent temperature.

Symptoms of a bad surface burner cap include:

• Uneven or flickering flames
• Difficulty in reaching desired temperatures
• Excessive gas odor during burner operation

Replace your faulty surface burner cap with this genuine OEM Frigidaire part to restore your cooktop. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This temperature-sensing probe measures internal appliance temperature and sends readings to the control board so the unit can maintain correct cooling or defrost cycles. Replaces a failed or damaged probe to restore temperature feedback. What it does

• Detects internal temperature and relays it to the control board for accurate cooling and defrost control
• Can cause temperature drift, excessive run times, or failed defrost cycles when faulty
• May trigger temperature-related error codes or cause food to become too warm or too cold
• Works as the control system's feedback element; compatible with the original connector style

• Disconnect power before installing to avoid shock or damage
• Handle the sensor tip and wiring gently; avoid kinking or pulling the lead
• Ensure the connector is fully seated and routed away from moving parts or heating elements

This replacement cap covers and protects exposed fasteners and trim on compatible Frigidaire appliances, restoring a finished appearance while helping keep out dirt and moisture. A simple, low-cost part for cosmetic and protective repair. What it does:

• Covers exposed fasteners, hinge posts, or trim edges to restore the appliance's finished look
• Helps prevent dirt, debris and moisture from entering mounting points and seams
• Can reduce rattling or vibration caused by missing or damaged trim pieces
• Snaps or presses into place to conceal hardware without altering function

• Typically installs by snapping into position; no special tools usually required
• Work with the appliance powered off if accessing areas near electrical components
• Inspect mating surfaces for damage or debris before installing for a secure fit
• Replace with identical OEM cap for correct fit and appearance

This replacement water supply tube routes water from the household line to the ice maker or dispenser, restoring reliable fill and stopping leaks caused by cracks, pinholes, or disconnected tubing. Simple, direct restoration for water delivery. What it does:

• Carries water from the supply connection to the icemaker or dispenser assembly.
• Restores normal fill if the original tube is kinked, cracked, or leaking.
• Helps stop visible leaks and can resolve slow or no-fill symptoms at the ice maker or dispenser.
• Works with existing fittings and clamps when installed correctly.

• Shut off the refrigerator power and the water supply before starting any work.
• Drain lines and catch residual water; use towels to protect cabinet and flooring.
• Remove and reinstall fittings carefully to avoid over-tightening; replace clamps if corroded or damaged.
• Test for leaks after restoring water and power; tighten fittings as needed.

This replacement glide helps a refrigerator or freezer drawer open and close smoothly and keeps the drawer aligned for reliable operation. It restores proper sliding action and reduces sticking or scraping. What it does

• Replaces a worn or broken drawer glide to restore smooth drawer movement
• Supports the drawer to prevent sagging and misalignment
• Helps reduce rubbing, sticking, and noisy operation during use
• Maintains proper drawer tracking so the drawer seats correctly

• Disconnect power to the appliance and remove food or contents from the drawer before starting
• Remove the drawer per your model's service instructions to access the glide
• Most installations are simple push-in or screw-replace procedures; keep fasteners from the original assembly

The Wire Harness is an OEM part for Frigidaire ranges. It is responsible for delivering electrical power to the igniter for ignition of the burners on your range.

A bad ignition wire harness can be caused by wear and tear, electrical issues, or damage. When the wire harness becomes faulty, it can result in issues such as the burners not igniting, inconsistent ignition, or no spark at all.

Symptoms of a bad ignition wire harness include:

• Burners failing to ignite or lighting up intermittently
• Weak or no spark when attempting to ignite the burners
• Unresponsive burner controls or igniter switches
• Burner flames not reaching the desired height or intensity

Replace your faulty ignition wire harness with this genuine OEM Frigidaire part to restore your range's burners. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.