Ffb02409ls0a Parts

The Kickplate Mounting Screw is an OEM part for Frigidaire dishwashers. This screw secures the kickplate, or toe panel, at the bottom of the dishwasher, keeping it in place and ensuring that it effectively covers and protects the lower components of the appliance. Proper mounting of the kickplate helps maintain the dishwasher's overall appearance and prevents debris from entering the lower section.

Common causes of a bad kickplate mounting screw include frequent removal and reinstallation, corrosion, or accidental damage.

Symptoms of a bad kickplate mounting screw include:

• The kickplate being loose or falling off
• Difficulty in securing the kickplate properly
• Visible rust or wear on the screw

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Side Mount Kit is an OEM replacement part for Frigidaire dishwashers. It contains mounting brackets, screws, and other hardware required to securely install the dishwasher against cabinetry in a side-by-side configuration. Proper attachment is necessary for stability and safety during operation. 

Symptoms of damaged or missing mounting hardware include:

• Excessive movement or rocking of the dishwasher body
• Potential detachment from cabinets  
• Screws pulling loose from repeated vibrations
• Improper door alignment causing difficulty closing fully

Causes related to normal wear over extended use periods. Damage may occur if weight is applied during improper lifting or installation attempts.  

Compatible models include Electrolux, Gibson, and select Kenmore units.

The Thermostat is an OEM part for Frigidaire dishwashers. It plays a critical role in regulating the temperature of the dishwasher during the wash and rinse cycles, ensuring optimal cleaning and drying performance.

Causes of a bad thermostat can include electrical malfunctions, wear and tear over time, or damage due to power surges or water exposure. A faulty thermostat can disrupt the normal operation of the dishwasher, leading to inefficient washing and potential damage to dishes.

Symptoms of a bad thermostat include:

• Dishes not drying properly
• Dishwasher not heating water correctly
• Error codes related to temperature issues
• Dishwasher stopping mid-cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Gasket is an OEM part for Frigidaire dishwashers. This gasket, also known as a door seal, is designed to form a watertight seal around the dishwasher door, preventing leaks during the wash and rinse cycles.

Causes of a bad gasket can include wear and tear from regular use, exposure to high temperatures and detergent chemicals, and damage from sharp objects or improper loading of dishes. Over time, the gasket material can degrade, losing its elasticity and sealing effectiveness.

Symptoms of a bad gasket include:

• Water leaking from the bottom or sides of the dishwasher door
• Visible cracks, tears, or deformation in the gasket
• The dishwasher door not closing properly or sealing tightly
• Moisture or mold buildup around the door seal area

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Roller Assembly is an OEM part for Frigidaire dishwashers. This part ensures that the dishwasher racks glide smoothly in and out, providing easy access to dishes and utensils during loading and unloading.  

Causes of a bad roller assembly can include regular wear and tear from frequent use, damage from overloading the racks, or exposure to harsh dishwasher detergents and high temperatures.

Symptoms of a bad roller assembly include:

• Difficulty sliding the racks in and out
• The rack falling off the track
• Unusual noises when moving the racks
• Visible wear, cracks, or missing rollers

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Door Spring Linkage is an OEM part for Frigidaire dishwashers. This part connects the door springs to the dishwasher door, ensuring smooth and balanced opening and closing of the door.

Causes of a bad door spring linkage can include wear and tear from frequent use, physical damage from impacts or mishandling, or deterioration over time.

Symptoms of a bad door spring linkage include:

• The dishwasher door not staying open or closed
• Difficulty in opening or closing the door
• A loose or sagging door
• Unusual noises when operating the door

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Water Valve is an OEM part for Frigidaire dishwashers. This valve controls the flow of water into the dishwasher, ensuring the correct amount of water enters the tub during the wash cycle.

Causes of a bad water valve can include mineral buildup from hard water, electrical failures, or wear and tear from regular use that affects the valve's ability to open and close properly.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Leaking water around the valve area
• Inconsistent or insufficient water levels during cycles
• Unusual noises when the valve is in operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The High Limit Thermostat is an OEM replacement part for Frigidaire dishwashers. It is a temperature control device located in the dishwasher's heating assembly that monitors water temperature levels during cycles. 

The high-limit thermostat plays a crucial safety role by automatically shutting off the dishwasher's heating element if water temperatures get too hot, preventing potential burns or damage. It ensures the dishwasher maintains the proper temperatures required for effective cleaning.

Symptoms of a bad high-limit thermostat include: 

• Incomplete or ineffective cleaning even on short cycles  
• Lack of hot water or intermittent hot water during cycles
• Strange smells or visible steam emitting from the dishwasher
• The heating element fails to activate when needed

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwasher models. 

Includes service line.

This float detects and monitors water levels in the appliance's sump/drain area to help prevent overfilling and water pooling. Replacing a damaged or stuck float restores proper water sensing and reduces leak risk. What it does:

• Senses water level in the drain pan or sump so the appliance can stop or redirect water flow
• Helps prevent water from overflowing or pooling under the appliance
• Can stop false fill/overfill conditions caused by a stuck or broken float
• Fault symptoms include water pooling, continuous or unexplained filling, or failure to drain properly

• Always unplug the appliance before accessing internal panels or service areas
• Remove the required access panels or trim to reach the sump/drain area; follow the model's service manual
• Handle the float and any clips or wiring carefully to avoid damage; reconnect any electrical connectors securely
• After installation, restore power and run a manual fill/drain test to verify proper operation

This is the complete lower dishrack that slides in and out on the tub rails. It provides a stable place to load plates, bowls, and larger cookware on the bottom level and restores smooth rolling and proper dish placement when the original rack is worn or damaged.

• Holds and organizes dishes on the lower level of the dishwasher
• Restores smooth rolling and proper alignment of the lower rack
• Common failure signs include broken or rusted tines, wobbling or derailed rack, and difficulty rolling the rack in/out
• Helps when dishes are not staying in place or the rack no longer supports loads properly

• Disconnect power before servicing
• Pull the old rack straight out of the tub; transfer any usable accessories if applicable
• Slide the new rack onto the existing rail tracks; ensure wheels are seated on both sides
• Test smooth movement and clear door closure before running a cycle

The Sump Cover and Filter is an OEM part for Frigidaire dishwashers. Located inside the bottom of the tub, it seals off and protects the drainage sump where debris collects after each wash cycle. The attached mesh filter screens out particles that could otherwise clog drain lines.

Causes can involve mineral buildup that blocks the filter mesh over time, cracks in the plastic housing exposing the sump, or a missing or damaged filter that fails to trap solids.

Symptoms of a bad sump cover and filter include:

• Standing water inside the bottom of the dishwasher tub
• Reduced drainage or water removal after cycles complete
• Floating debris trapped near the drain pump area

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
 

The Pump Cover is an OEM part for Frigidaire dishwashers. It is designed to cover and protect the dishwasher's pump, which is essential for the proper circulation of water during the wash cycle. This cover helps ensure that the pump operates efficiently and prevents debris from entering and damaging the pump.

Causes of a bad pump cover can include repeated exposure to high water pressure, accidental impact during loading or unloading of dishes, or buildup of debris and hard water deposits.

Symptoms of a bad Pump Cover include:

• Leaks coming from the pump area
• Unusual noises during the wash cycle
• Decreased washing performance
• Visible cracks or wear on the cover

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement bracket secures a component to the appliance frame, keeping it aligned and stable during operation. Install it to replace a bent, cracked, or missing bracket and restore a solid, rattle-free mount.

• Provides a rigid mounting point to hold the specified part in place
• Helps maintain alignment to reduce vibration, rubbing, or noise
• Replaces damaged or corroded hardware to restore a secure fit
• Common symptoms: loose or sagging component, unusual vibration/noise, or part shifting out of position

• Disconnect power before servicing; shut off water supply if working near water lines
• Note original orientation and fastener locations; take a reference photo
• Transfer and reuse existing screws/clips as needed; tighten fasteners evenly without over-torquing
• Verify alignment and test operation before final reassembly

Includes one sprayarm.

The Dishrack Roller is an OEM part for Frigidaire dishwashers. This part ensures smooth and effortless movement of the dishrack in and out of the dishwasher. These rollers are attached to the sides of the dishrack, ensuring that it can glide easily without sticking or jamming, thus preventing damage to the dishes or the dishwasher itself.  

Causes of a bad Dishrack Roller can include wear and tear from regular use, damage from overloading the dishrack, or degradation of the roller material over time.  

Symptoms of a bad Dishrack Roller include:

• The dishrack sticking or struggling to move in and out
• A noisy operation when pulling the dishrack
• The dishrack tilting or becoming unaligned due to a missing or broken roller

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.