Fffco9m1rw Parts

This is a white wire basket that is used on a freezer. This wire basket has handles at the top which rest upon the rails in the freezer. This basket is used to store and organize food within the freezer. There is more than one basket used in each freezer. Adding a white wire basket or replacing one is a very easy process.A new white wire basket may be needed if the original is cracked, broken, or damaged in any way. Additional wire baskets can be added to a freezer for more storage organization options. For example, some users keep the meat in one basket, fren vegetables in another, and ice cream in another basket.This is a genuine Frigidaire part and is sourced directly from the manufacturer. It is sold individually. This specific white wire basket is compatible with freezers that are manufacture by Frigidaire, Kenmore, and Crosley.

This door hinge supports the appliance door and provides a smooth pivot for opening and closing. Replacing a bent or worn hinge restores door alignment and helps the gasket seal correctly to maintain proper performance.

• Supports door weight and provides the pivot point for movement
• Maintains alignment for even gasket contact and reliable closing
• Common symptoms: door sags or rubs, pops open, won't close smoothly, squeaks/grinds, visible bend or wear
• Direct replacement for a damaged hinge to restore proper door operation

• Unplug the appliance and remove items from the door before starting
• Support the door; mark hinge position, then remove mounting screws and swap the hinge
• Save and reuse the original mounting hardware
• After installation, check door alignment and gasket contact; adjust as needed

This panel-mounted signal light is the small indicator lamp that illuminates when a function is active. It restores clear visual status on the control panel so you can tell at a glance when the appliance is operating. What it does:

• Lights to indicate when a feature, cycle, or function is on (model-dependent)
• Restores visible status feedback on the console or control panel
• Helps alert you if a function remains active after use
• Addresses issues such as no light, constant-on light, flickering, or a damaged lens

• 1 signal light

• Disconnect power at the breaker before servicing
• Access the control panel/console; remove knobs and screws as needed
• Note wire positions or take a photo; transfer wires to the new light
• Secure the light in the panel, reassemble, restore power, and test

The Basket is an OEM component for Frigidaire freezers. Positioned in the freezer compartment, this removable shelf provides storage for frozen fruits, vegetables, and more. 

Causes of a bad basket freezer can include wear and tear over time, or damage to the plastic material from excessive loads. 

Symptoms of a bad basket include:

• Cracks or breaks in the plastic that compromise the structure
• Difficulty removing or replacing the shelf 
• Warping preventing a stable storage surface

Compatible with Electrolux and some Gibson models as well. Convenient freezing and optimized layouts resume with the installation of this durable OEM shelf.
 

This replacement screw secures appliance components so brackets, shelves, trim, or panels stay firmly in place. Install a new screw when the original is missing, stripped, or corroded to restore a tight, rattle-free fit.

• Fastens brackets, panels, trim, or covers to the cabinet or liner
• Helps maintain alignment and reduce vibration and noise
• Direct replacement for a missing, rusted, or stripped fastener
• Use wherever your model's parts diagram specifies this screw

• Disconnect power before servicing; shut off water if working near water lines
• Match thread and length to the original location as shown in your model's parts diagram
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening (especially into plastic)
• Retain and transfer any original spacers or clips used with this fastener

The product featured is a Frigidaire refrigerator compressor. The compressor is a vital component for the cooling and freezing process of a refrigerator. A compressor works together with the evaporator in providing the cold air needed to keep everything at the desired temperature. When a compressor fails, this could have an effect that calls for an emergency repair. Losing the compressor function means the refrigerator stops getting cold in both compartments. Prolonging the repair could mean the loss of all the food items stored inside. A faulty compressor may become very loud when it operates. Users may hear a slight clicking sound on a compressor that's entirely out of commission. This is the relay clicking in an attempt to power the compressor. If a compressor does go out, keep the doors of the freezer and refrigerator shut. There's a chance the food can be salvaged if repairs take place fast enough. This compressor is a genuine OEM product and is sourced directly from the manufacturer and is only available as an individual component. Frigidaire, Kenmore, and Maytag refrigerators can be repaired with this component.

This hinge assembly supports and pivots the appliance door so it opens smoothly and closes squarely against the gasket. Replacing a worn or bent hinge restores alignment and helps maintain a reliable seal and temperature performance. What it does:

• Provides the pivot point and support for the door
• Helps keep the door level for proper gasket contact
• Can help resolve door sagging, rubbing, or binding
• Can help with doors that won't fully close or pop back open
• Addresses play, squeaks, or visible hinge damage

• One hinge assembly

• Disconnect power and support the door before removing hinge fasteners
• Note and transfer any shims/spacers from the old hinge to the new one
• Reuse existing hardware unless the manufacturer specifies otherwise
• After installation, verify door alignment and full gasket contact; adjust as needed

Quantity of 1 clip.

Note: See kit# 5303922007 and 5304406520.

This temperature control knob replaces a worn or missing knob so you can easily adjust the cold-control setting. Restores smooth, precise temperature adjustments and a clean, factory look. What it does:

• Attaches to the cold-control (thermostat) shaft to change the temperature setting
• Provides secure grip and pointer alignment for accurate selections
• Typical failure symptoms: cracked or missing knob, stripped hub, or a knob that slips or won't turn the control

• 1 temperature control knob

• Disconnect power before servicing
• Pull the old knob straight off the shaft; avoid prying at an angle to prevent shaft damage
• Align the shaft shape with the new knob and press firmly until fully seated
• The pointer aligns with the control graphics after installation

This hinge assembly provides the pivot and support for your freezer door or lid, allowing smooth opening and secure closing. Replacing a worn hinge restores alignment and helps the gasket seal to keep cold air contained.

• Supports and pivots the door/lid during opening and closing
• Maintains alignment so the door/lid closes fully and seals properly
• Can help resolve sagging, binding, scraping noises, or doors not closing all the way
• Replaces a bent, cracked, or seized hinge assembly

• Disconnect power before service; wear gloves.
• Support the door or lid and use a second person to prevent drops or damage.
• Transfer any spacers, bushings, or covers from the old hinge if required.
• Align the hinge, tighten fasteners, and verify smooth operation and gasket seal.

The Freezer Basket is an OEM part for Frigidaire refrigerators. Located in the freezer compartment, the basket provides organized storage for frozen items. It includes dividers that can be adjusted to accommodate different-sized packages. The freezer basket is designed to neatly fit within the space, maximizing storage capabilities.

Causes of a bad freezer basket include broken or damaged wires in the dividers, or cracks/splits in the plastic construction that compromise its structure.  

Symptoms of a bad freezer basket include:

• Items falling through or between cracks in the basket
• Dividers that won't stay upright or in desired positions  
• Excessive sagging, warping, or other physical signs of wear

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
 

This compressor starter engages the start windings so the refrigerator/freezer compressor can begin running. When the starter fails, the compressor may not start, leading to warm temperatures and clicking or brief humming from the compressor area.

• Provides a brief, high-current assist to the compressor's start winding to initiate operation
• Automatically disengages after startup so the compressor runs normally
• Common symptoms of a faulty starter: compressor won't start, repeated clicking, brief hum then stop, little or no cooling
• Helps prevent repeated, hard start attempts that can stress the compressor

• Disconnect power before servicing; wear appropriate PPE
• Access the machine compartment; note wire positions/orientation before removal
• Pull the old starter straight off the compressor pins; seat the new starter fully and reconnect wiring
• Avoid stressing refrigerant tubing; discharge it per safe procedures

This compressor mounting clip secures the compressor to its chassis to reduce movement and noise for reliable operation. It replaces worn or broken clips that allow the compressor to shift during use. What it does:

• Holds the compressor in place on the mounting bracket to prevent shifting
• Reduces vibration and rattling noises caused by a loose mount
• Helps maintain proper compressor alignment for steady operation
• Useful when a cracked or bent clip no longer secures the compressor

• Disconnect power to the appliance before accessing compressor area
• Inspect surrounding mounts and rubber isolators; replace if damaged
• Secure clip fully so compressor is held without forcing or misaligning components

The Temperature Control Thermostat is an OEM part for Frigidaire upright and chest freezers. Located within the freezer compartment, it accurately monitors and regulates interior temperatures. 

Symptoms of a faulty thermostat involve:

• Improper or inconsistent freezing leading to melting or frost buildup
• The compressor continues to run even when the target temperature is reached  
• Thermal runaway causing dangerously low freezer temperatures

Causes can be a gradual loss of calibration from years of thermal cycling, moisture corroding electrical connections, or failed temperature regulation due to worn components.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore upright and chest freezer models. 

This light socket securely holds the appliance bulb and provides the electrical connection to illuminate the compartment when the door is opened. Replacing a faulty socket restores interior lighting so you can easily see contents.

• Provides the electrical connection and physical mounting for the light bulb
• Common failure symptoms: light won't turn on, flickers, or only works when the bulb is jiggled
• Show signs of heat discoloration, loose terminals, or intermittent contact

• Unplug the appliance before service; power is off
• Allow the bulb and surrounding area to cool before handling
• Handle wiring carefully; transfer conductors to the new socket one at a time to maintain correct connections
• Do not exceed the bulb type/wattage specified on the appliance rating label

This thermostat senses temperature and opens or closes an electrical circuit to regulate your appliance's operation. Replacing a failing thermostat helps restore consistent temperatures, proper cycling, and reliable protection against overheating or inadequate cooling/heating. What it does:

• Monitors temperature and switches the circuit at its set point
• Regulates heating or cooling cycles as designed by the unit
• Helps maintain stable operating temperatures and protect components
• Common failure symptoms: temperature swings, unit runs constantly or short cycles, or no heating/cooling

• 1 thermostat

• Disconnect power to the appliance before servicing
• Access the thermostat and note wire placement; move one lead at a time to the new part
• Reuse original mounting bracket/clip or insulation if present
• Restore power and verify proper cycling and operation