Fffu06m1tw Parts

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

The Start Relay is an OEM replacement part for Frigidaire refrigerators. It is an electro-mechanical part that signals the refrigerator’s compressor to activate, initiating the cooling cycle. As the main switching mechanism that controls refrigerator operation, start relays experience considerable wear over thousands of on/off cycles.

Symptoms of a bad start relay include:

• Refrigerator failing to cool or compressor not engaging  
• Constant humming sound but no cold air circulation
• Cooling performance declining noticeably over time

Causes of start relay failure generally relate to ongoing heat and electrical load stresses that slowly degrade insulation and wiring over the refrigerator’s lifetime. Corrosion from condensation or refrigerant leaks inside the unit can also compromise its function.

This OEM Frigidaire replacement relay is compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

This factory screw secures interior or door components in your refrigerator so they stay tight and aligned. Replace missing, stripped, or corroded hardware to eliminate looseness and prevent parts from shifting or rattling during use.

• Fastens brackets, trim, rails, bins, or handles to the cabinet or door
• Restores a secure fit when the original screw is lost, damaged, or rusted
• Helps correct looseness, vibration, and rattling from unsecured parts
• Common symptoms: loose or wobbling handle/trim, misaligned parts, missing hardware

• Disconnect power to the appliance before servicing; turn off water if working near dispenser/ice areas
• Match to the original hardware and install in the same location; reuse any washers/spacers
• Start threads by hand to prevent cross-threading; use the correct driver bit
• Tighten snugly—do not overtighten to avoid stripping threads or cracking plastic

This compressor with mounting clip is the sealed refrigeration compressor assembly that circulates refrigerant to keep your refrigerator cold. Replacing a failed compressor restores the system's ability to cool when repairable. What it does:

• Compresses refrigerant vapor to maintain proper cooling cycle; primary sealed-system pump.
• Commonly linked to symptoms like no cooling, refrigerator runs but temperature rises, or compressor not cycling.
• Works as the sealed-system component; requires correct match to refrigerant and system specifications.

• One compressor assembly with mounting clip as shown.

• Replacement involves sealed-system work.
• Disconnect power before starting; follow all electrical safety practices.
• Use proper tools and gaskets/hoses; pressure-test and leak-check after repair.

This electronic control board replaces the appliance's main circuit board to restore normal control and cycle operation. It provides the control logic and interface that let the appliance respond to user inputs and run programmed cycles. What it does:

• Acts as the appliance's central electronic control, managing power to functional components.
• Processes user commands from the control panel and communicates status to displays or indicators.
• Regulates cycle timing and control signals that start and stop motors, compressors, or heaters.
• Required if the control panel is unresponsive, display is blank or erratic, or the appliance won't start or complete cycles.

• Disconnect power to the appliance before attempting any repairs to avoid shock or damage.
• Handle the board by the edges and avoid touching components; use proper ESD precautions if available.
• Verify connector locations and orientation before removing or installing the board; take photos for reference.

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This replacement handle restores a secure, comfortable grip so you can open and close your appliance door or drawer with confidence. Replacing a cracked or loose handle improves usability and appearance without affecting the door's alignment.

• Provides the handhold used to open and close the appliance
• Restores operation when the original handle is cracked, broken, loose, or missing
• Helps prevent damage from pulling on trim, frames, or the latch
• Refreshes the look when the old handle is scuffed or discolored

• Unplug or disconnect power before servicing
• Support the door/drawer while removing and installing the handle
• Remove interior/backside mounting screws; transfer original screws, spacers, or caps if required
• Align and tighten screws evenly; do not overtighten

This interior refrigerator light assembly provides illumination inside the fresh food compartment so you can clearly see contents. Restores visibility after a failed or damaged light. What it does:

• Houses and secures the refrigerator light so the bulb stays in place
• Provides focused cabinet illumination for clearer visibility
• Replaces a cracked, discolored, or non-functional interior light housing
• Helps resolve intermittent or no-light symptoms when the bulb and socket are intact

• Disconnect power to the appliance before beginning any service
• Handle lens components carefully to avoid cracking; use gentle prying tools if required
• Test or replace the bulb separately (match OEM bulb type)
• Refer to your refrigerator service manual for model-specific removal and reinstallation steps

This replacement refrigerator door handle restores a secure grip for opening and closing the fridge, improving usability and appearance where the original handle is cracked, loose, or missing. Matches OEM fit and finish for a factory look. What it does:

• Provides a firm handhold to open and close the refrigerator door smoothly
• Replaces cracked, broken, loose, or worn handles that affect door operation or appearance
• Restores proper clearance and alignment so the door seals and operates correctly
• Durable plastic construction resists everyday wear from normal use

• One replacement refrigerator door handle

• High-level, user-installable part: remove trim or screws covering handle, detach old handle, and fasten new handle using original hardware
• Keep screws and trim pieces organized during removal to ensure proper reassembly
• Disconnect power only if required for access per manufacturer instructions; follow basic safety precautions (gloves, eye protection)

This shim is a small alignment spacer used to correct fit, spacing, or leveling between appliance components for improved part clearance and smoother operation. It helps restore proper alignment and reduce rubbing or binding where parts meet. What it does:

• Provides a thin, stable spacer to adjust panel, door, or component alignment
• Helps eliminate rubbing, binding, or misaligned gaps that cause noise or wear
• Restores proper clearance so moving parts operate smoothly
• Useful when replacing or reassembling components to achieve correct fit

• Shim

• Turn off and unplug the appliance before starting any work
• Inspect surrounding parts to ensure the shim addresses the alignment issue
• Position the shim between mating surfaces as needed; secure per OEM guidance

This drain hose routes wastewater from the appliance to the household drain so your unit can empty reliably. It replaces a damaged or clogged hose to help stop backups and leaks when installed correctly. What it does

• Carries wash and condensation water from the appliance to the drain line.
• Restores normal draining when the original hose is cracked, split, or clogged.
• Helps prevent water pooling inside or beneath the appliance when properly connected.
• Works with household drain fittings—ensure proper routing and secure clamps.

• Disconnect power and turn off water supply before servicing.
• Route hose without sharp bends or kinks; secure with clamps at both connections.
• Inspect hose ends and replace clamps if corroded; test for leaks after installation.

This adjustable leveling foot supports and stabilizes the appliance, helping keep it steady and properly aligned for smooth operation. It replaces a worn or damaged support that can cause rocking or uneven height. What it does:

• Provides a stable support point and lets you raise or lower the appliance to level it
• Helps stop rocking, reduce vibration, and prevent uneven door gaps
• Restores proper appliance alignment to improve performance and prevent wear
• Fits at the appliance base where a missing or damaged foot causes instability

• One adjustable leveling foot

• Turn power off at the breaker before moving or tilting the appliance to access the foot
• Move the appliance carefully with help; use appliance sliders or protect the floor
• Thread the foot in or out to adjust height, then ensure the appliance sits level on all corners

This electrical control board replaces the appliance's main electronic controller to restore reliable control of cycles and user settings. It provides the interface and logic that runs the machine's timed and electronic functions. What it does:

• Manages cycle selection, timing and execution of functions driven by the electronic control
• Sends/receives signals to valves, motors, heaters and sensors so the appliance runs programmed cycles
• Helps stop erratic or incorrect cycle behavior caused by a failed controller
• Commonly linked to symptoms such as unresponsive buttons, display errors, failure to start, or intermittent operation

• One electrical control board

• Disconnect power before service to avoid shock — work only after the appliance is fully de-energized
• Some units require removal of the console or control panel; keep track of screws and connectors
• Handle the board by its edges and avoid touching circuit components; static discharge precautions recommended

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts