Fffu06m1tw Parts

The Control Assembly is an OEM part for Frigidaire freezers. It works with the thermostat to regulate the temperature inside the freezer and maintain the desired cooling levels.

A bad control can be caused by electrical issues, sensor failure, or damage. Signs of a faulty control include inaccurate temperature readings, frequent temperature fluctuations, or the freezer not reaching the desired temperature.

Symptoms of a bad control can include:

• Inaccurate temperature readings
• Frequent temperature fluctuations
• The freezer not reaching temperature

Replace your malfunctioning control with this genuine OEM part to restore of your freezer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This harness with reed switch detects a magnetic field and provides a ready-made wiring connection for the appliance's door/sensor circuit, restoring reliable sensing and signal routing. What it does

• Contains a reed (magnetic) switch in-line with a multi-conductor harness to detect open/closed or presence/absence of a magnetic field
• Replaces a damaged or faulty sensor harness that can cause intermittent or no signal to the control board
• Common symptoms: appliance not sensing door/cover, controls not responding, or features tied to the sensor fail to activate
• Designed to mate with the factory connector set and routing used by the original equipment

• One complete harness with reed switch

• Verify power is disconnected before accessing wiring or replacing the harness
• Handle the reed switch and connectors gently to avoid damage; secure harness with original clips or fasteners

This sealed compressor kit replaces a failed refrigeration compressor to restore cooling performance in compatible refrigerators. Designed as a direct-replacement assembly, it provides the core refrigeration compression needed for the appliance to circulate refrigerant. What it does:

• Compresses refrigerant so the cooling cycle can operate and the refrigerator can maintain set temperatures
• Stops or reduces cooling when a compressor fails, hums, or does not start
• Addresses symptoms such as no cooling, warm compartments, or excessive compressor noise when confirmed faulty
• Works as the primary drive for refrigerant flow in the sealed refrigerant circuit

• Appliance must be disconnected from power before starting any repairs
• Proper evacuation, recovery and recharge of the refrigerant circuit is required per regulations and OEM instructions

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker, restoring reliable water delivery and ice production when the valve is faulty or worn. What it does:

• Opens and shuts to allow water into the ice maker and dispenser when activated
• Common symptom: no water to dispenser or ice maker
• Common symptom: reduced or intermittent water flow from dispenser
• Common symptom: ice maker not filling or producing smaller/soft ice
• Can cause visible leaks at the valve or connections when failing

• One water inlet valve assembly

• Turn off water supply and unplug appliance before beginning work
• Relieve any pressure in the water line and have towels handy for minor spills
• Verify inlet/outlet hose orientation and tighten all fittings to OEM torque; use replacement gaskets if supplied

This replacement tube routes water from the refrigerator's defrost area to the drain pan to help prevent leaks and pooling. A simple, direct-fit part for restoring proper drain flow and reducing water buildup. What it does

• Channels defrost and condensation water to the drain pan to prevent interior pooling.
• Helps maintain normal drainage to avoid ice buildup or water leaks.
• Restores a damaged, cracked or clogged original tube where flow is restricted.
• Works as a service part when inspecting drain path during defrost/drain issues.

• One replacement tube.

• Disconnect power to the appliance before starting any repair.
• Remove access panels as needed and route tube along the factory path; avoid sharp bends or kinks.
• Inspect drain openings and heater components while replacing the tube.

This main control board manages the fridge's electronic functions so temperature, defrost cycles, and user controls operate correctly. Replacing a faulty board restores normal control response and cycle timing when electronics fail. What it does:

• Controls compressor, fans, defrost timer and other timed/relayed functions through the appliance's electronics
• Processes user inputs from the front control panel and sends commands to subsystems
• Can cause symptoms like blank or unresponsive controls, errors on the display, or erratic cooling when it fails
• Works with connected sensors and relays—symptoms may overlap with sensors or wiring faults

• One main control board (electronic control), ready for installation

• Disconnect power to the appliance before starting to avoid shock or damage
• Handle the board carefully; avoid static discharge and do not touch circuit traces or components
• Verify connectors and harnesses are fully seated; match connector locations before final reassembly

The Hinge is an OEM part for Frigidaire freezers. It is responsible for supporting and enabling the smooth opening and closing of the door.

A bad hinge can be caused by wear and tear, damage, or misalignment. Signs of a faulty top door hinge include difficulty in opening or closing the freezer door, sagging or misalignment of the door, or a loose or wobbly hinge.

Symptoms of a bad hinge can include:

• Difficulty in opening or closing the door 
• Sagging or misalignment of the door
• A loose hinge

Replace your malfunctioning hinge with this genuine OEM part to restore your freezer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Freezer Sensor is an OEM replacement part for Frigidaire bottom-mount refrigerators. Located in the freezer compartment, this sensor monitors and reports temperature conditions to the main control board.

Causes for failure can involve general wear over time or impact damage disrupting circuit integrity. Exposure to temperature fluctuations may also contribute to sensor degradation.

Symptoms of a faulty freezer sensor include:

• Freezer failing to adequately cool or regulate temperatures
• Refrigerator flashing error codes relating to sensor input  
• Defrost issues occurring if sensor incorrectly triggers cycle
• Condensation or ice buildup due to improper temperature reporting

This sensor is also compatible with select Electrolux, Kelvinator and select Kenmore bottom-mount models.

This filter-drier removes moisture and contaminants from a refrigerator's sealed refrigerant circuit to help protect the compressor and improve cooling reliability. It's a service replacement for sealed-system repairs. What it does:

• Traps moisture and acid from refrigerant to reduce corrosion and oil breakdown.
• Captures particulate debris that can clog expansion devices and reduce cooling.
• Helps restore proper refrigerant flow after a compressor or tubing repair.
• Common symptom: system not cooling efficiently or refrigerant circuit contaminated after failures.

• One filter-drier (quantity: 1)

• Intended for certified HVAC/refrigeration technicians only; sealed-system service requires proper tools and refrigerant handling.
• Replace only when the system is opened for repair (compressor, tubing, or evaporator replacement).
• Must be brazed into the liquid line, evacuated, and charged per manufacturer refrigerant and service specs.
• Dispose of and handle used refrigerant and components according to local regulations.

This compressor grommet is a rubber mounting isolator that cushions and secures the compressor to the appliance chassis, helping reduce vibration and noise while preventing metal-to-metal contact and premature wear. What it does:

• Cushions compressor movement to reduce vibration transmitted to the cabinet
• Dampens noise and rattling caused by compressor operation
• Prevents direct metal-to-metal contact that can wear mounting points
• Helps keep the compressor positioned and secured under load

• Disconnect power to the appliance before accessing the compressor or base pan
• Replace grommets while supporting the compressor to avoid strain on lines and connections
• Inspect remaining mounting grommets; replace all worn isolators for best performance