Fffu06m1tw Parts

This nut-anchor is a small mounting insert that provides a secure threaded point in thin sheet metal so screws can fasten panels or components reliably. It restores a solid attachment where the original fastener or threaded hole is missing. What it does:

• Provides a reinforced threaded anchor in thin metal or plastic panels
• Allows screws to tighten without stripping the sheet material
• Stops panels, trim, or assemblies from coming loose or rattling
• Used where a captive nut or threaded insert is required for reassembly

• Install where original nut/insert was located; verify orientation before fastening
• Use the correct screw size and hand-tighten to avoid overtightening or thread damage
• Disconnect power and move the appliance to a safe, stable work area before servicing
• If the original mounting point is severely damaged, consider assessing the surrounding structure for repair

The Freezer Door Hinge is an OEM part for Frigidaire side-by-side refrigerators. It allows smooth, controlled movement of the freezer door through machined metal parts. 

Symptoms of a faulty or worn-out hinge include:

• Door sagging open and failing to securely latch  
• Resistance or grinding noises occurring during opening/closing
• Inability to align gaskets for an air tight seal
• Visible bending, cracks or loose bolts on hinge assembly

Potential causes relate to natural wear from repeated stress on hinge pins and mounting points. Overloading with excessively heavy items could accelerate damage.

The hinge is compatible with select side-by-side models from KitchenAid, Westinghouse and select Kenmore.

The Fan Mount is an OEM part for Frigidaire refrigerators. It is responsible for holding the evaporator fan in place within the refrigerator's freezer compartment.

A bad fan mount can be caused by regular wear and tear, physical damage, or improper installation. Signs of a faulty fan mount include excessive noise coming from the freezer, reduced cooling performance, or the fan not spinning properly.

Symptoms of a bad fan mount can include:

• Unusual noises coming from the freezer
• Insufficient cooling or uneven temperature
• The evaporator fan not spinning
• Excessive frost or ice buildup in the freezer

Replace your damaged or worn-out fan mount with this genuine OEM part to ensure proper airflow in your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This reed switch harness connects a reed-style door or lid sensor to the appliance's control, restoring reliable open/close sensing and related functions. It replaces a damaged or broken harness to help reestablish proper sensor signals. What it does:

• Provides the electrical connection between the reed (magnetic) sensor and the control board
• Restores door/lid open-close sensing used for lights, safety interlocks, or cycle control
• Commonly fails when wiring is frayed, connectors are loose, or the harness is damaged
• Symptoms include no interior light, intermittent sensor behavior, or control errors tied to door/lid sensing

• Disconnect power to the appliance before beginning work to avoid shock or damage
• Handle connectors gently and ensure mating terminals are fully seated
• Route and secure the harness following existing clips or channels to avoid pinching or heat exposure

This cover protects the appliance's control board and wiring, keeping them secure from spills, dust, and physical damage so the controls work reliably and are easier to service. What it does:

• Shields the control board and associated wiring from moisture, dust, and accidental contact
• Helps prevent shorts and component damage that can cause control or electrical faults
• Keeps wiring and connectors routed and secured to reduce vibration-related issues
• Restores a finished appearance and proper airflow around control components

• One cover as shown

• Disconnect power before servicing to avoid electric shock
• Remove any mounting screws or clips holding the old cover, then lift off and fit the replacement in the same orientation
• Reinstall screws or clips securely but avoid overtightening plastic fasteners

This evaporator coil assembly circulates refrigerant inside the freezer compartment to absorb heat and enable proper cooling. Replacing a faulty coil restores cold temperatures and helps the system run efficiently. What it does:

• Evaporates refrigerant to remove heat from the freezer compartment
• Enables consistent cold airflow for proper food preservation
• Prevents excessive frost buildup when functioning correctly
• Helps reduce long run cycles caused by poor evaporator performance

• 1 evaporator coil assembly

• Disconnect power before starting work and follow basic electrical safety
• Inspect and replace damaged gaskets, insulation, or defrost components as needed for reliable operation
• Test system for leaks and proper cooling after installation

This wiring harness connects electrical components inside the appliance to restore reliable power and signal paths. Replacing a damaged harness helps eliminate intermittent operation and restores proper component communication. What it does:

• Provides secure electrical connections between internal components and the main control
• Replaces frayed, burned, or broken wiring that can cause intermittent or no operation
• Helps stop shorts or poor connections that lead to error codes or component failures
• Maintains factory routing and connector fit for correct installation and function

• One wiring harness as shown

• Disconnect power before inspecting or replacing the harness to avoid shock or damage
• Inspect mating connectors and terminals for damage; replace any corroded parts
• Test appliance function after installation and secure any loose wires or clips

The Freezer Seal is an OEM component specifically designed for Frigidaire refrigerators. This durable rubber seal forms a tight weatherstripping around the perimeter of the refrigerator's freezer door, preventing cold air from escaping. 

Causes of a bad freezer seal include drying out and cracking over many years of use or damage caused by over-tightening the door hinges. 

Symptoms of a bad freezer seal include: 

• Frost or ice buildup around the freezer door seal
• Warm air entering the freezer compartment 
• Higher energy bills due to decreased insulation
• Moisture accumulating in the floor drain 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement power cord supplies AC power to compatible refrigerators so the appliance can run reliably. Designed as a direct-fit replacement when the original cord is damaged or worn. What it does

• Replaces a damaged or frayed refrigerator power cord to restore safe power delivery.
• Ensures a secure connection to the appliance and household outlet for normal operation.
• Helps eliminate intermittent power loss, burning odor, or visible insulation damage symptoms.
• For use when the cord or plug shows wear, exposed wires, or bent/broken prongs.

• One replacement power cord.

• Disconnect power at the breaker or unplug the appliance before beginning any work.
• Handle wiring with care; secure connections and strain relief must be used where required.
• Do not modify the cord or plug; use only as intended by the appliance manufacturer.

This condenser coil assembly removes heat from the refrigerant so the refrigerator can cool properly. It's a direct-fit replacement that restores the cooling loop's ability to shed heat and run more efficiently. What it does

• Exchanges heat from the refrigerant to the surrounding air so the cooling cycle can continue
• Helps the compressor run within normal temperature range
• Commonly replaced when the refrigerator is warm inside or the unit runs continuously
• Needed if the condenser is bent, clogged with debris, or leaking

• One condenser

• Disconnect power to the appliance before starting any repair
• Handle with care — coil fins and tubing can be sharp and easily damaged
• Reinstalling may require removal of back or lower access panels; keep fasteners organized
• Sealed-system work (cutting or brazing refrigerant lines) requires certified HVAC service — do not attempt if refrigerant lines must be opened