Ffmv062lqa Parts

This mounting kit secures the appliance or a related component to its intended surface or frame, restoring a firm, stable installation. Replace worn or missing mounting parts to correct looseness, rattling, or misalignment.

• Anchors the unit/component to designated mounting points for proper support and alignment
• Helps reduce shifting, vibration, and noise from loose or failing mounts
• Replaces damaged, stripped, corroded, or missing brackets/fasteners
• Common signs: the unit feels loose, rattles, sags, or mounting hardware is broken

• Disconnect power at the breaker and shut off water or gas, if applicable, before servicing
• Support the appliance/component during removal and reinstallation to prevent tipping or damage
• Follow your model's installation instructions/template to locate mounting points and hardware
• Tighten hardware evenly; avoid overtightening into thin sheet metal or plastic

The Handle is an OEM part for Frigidaire microwaves. It attaches to the microwave door and allows users to easily open and close access to the cooking cavity. This handle plays an important role in usability by providing a convenient grip point.

Causes of a bad handle can be normal wear and tear over time from repeated use. Handles can also become damaged or loose due to accidental mishandling or impact.

Symptoms of a bad handle include:

• Loose or detached handle
• Difficulty accessing the cooking cavity 
• Potential safety hazards

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This thermostat is a temperature-sensitive switch used in select appliances to regulate heat or provide over-temperature protection. Replacing a failed thermostat restores consistent temperature control and helps protect internal components from heat-related damage.

• Monitors temperature at its mounting point and opens/closes the circuit at a factory-set threshold
• Regulates heating cycles or functions as a high-limit safety cutoff (application-dependent)
• Failure open can cause no heat or premature shutdown
• Failure stuck closed can lead to overheating, erratic temperatures, or extended run times

• Disconnect power and allow the appliance to cool before servicing
• Note wire locations; transfer one lead at a time to the new thermostat
• Mount flush and secure to the mating surface/bracket for accurate sensing; ensure firm terminal connections
• After installation, run and observe an initial cycle to confirm normal operation

Stainless panel with black touch pad.

The Microwave Turntable tray is an OEM replacement part for Frigidaire microwaves. As the foundation of the microwave's cooking surface, the turntable tray is responsible for ensuring even cooking of foods by rotating slowly during the cooking process. This allows different areas of food to absorb equivalent amounts of energy. 

Causes of a bad turntable tray can include cracks or chips that develop due to repeated use over time. The motor that powers rotation may also fail due to normal wear. 

Symptoms of a bad turntable tray include:

• Uneven or incomplete cooking of foods
• The tray no longer rotates properly during cook cycles 
• Loud noises or vibration occurring when the microwave is in use
• Cracks, chips or other visible damage to the turntable surface

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Coupler is an OEM part for Frigidaire microwaves. It is responsible for providing a secure connection between the motor and the glass tray.  It enables the smooth rotation of the glass tray turntable, ensuring even heat distribution during the cooking process.

A bad coupler can occur due to wear and tear over time, accidental damage, or improper handling. Signs of a faulty coupler include the glass tray not rotating or turning unevenly during operation.

Symptoms of a bad coupler include:

• The glass tray not rotating 
• Uneven heating  
• Unusual noises  

Replace your faulty microwave glass tray turntable coupler with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

The Shelf Support is an OEM part for Frigidaire countertop microwaves. It holds and stabilizes shelving inside the microwave cavity during operation. 

Symptoms of a faulty shelf support include:

• Loose or detached shelves that cannot maintain placement  
• Difficulty positioning shelves at desired height levels
• Scrapes or dents on interior microwave walls from shelf movement
• Gaps or spaces where shelf legs do not sit securely  

Causes relate to typical wear of spring clips or brackets holding shelves in place. Regular vibration from microwave turntables can weaken pressure points over time.

This OEM replacement shelf is compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Shelf Support is an OEM part for Frigidaire countertop microwaves. It holds and stabilizes shelving inside the microwave cavity during operation. 

Symptoms of a faulty shelf support include:

• Loose or detached shelves that cannot maintain placement  
• Difficulty positioning shelves at desired height levels
• Scrapes or dents on interior microwave walls from shelf movement
• Gaps or spaces where shelf legs do not sit securely  

Causes relate to typical wear of spring clips or brackets holding shelves in place. Regular vibration from microwave turntables can weaken pressure points over time.

This OEM replacement shelf is compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Mounting Kit is an OEM part for Frigidaire microwaves. It provides the necessary hardware to mount a built-in microwave securely above a cooktop or range. The mounting kit contains mounting brackets, and screws to facilitate a safe and sturdy installation. This kit does not include the installation instructions.

Causes of a bad mounting kit can include deterioration of mounting brackets or screws over time and repeated use, or if the original kit was missing components needed for a secure installation.

Symptoms of a bad or missing mounting kit include:

• The microwave become loose or detached from the wall
• Screws fall out or strips during installation
• Brackets bend or break over time
• Microwave is not level after installation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This latch secures the appliance door in the closed position to ensure proper operation and safety. A worn or broken latch can prevent the door from closing or staying shut, which may interrupt cycles or affect performance.

• Keeps the door closed and aligned so the appliance can start and run correctly
• Can address issues like incomplete cycles or error codes related to an open door
• Restores original closing feel and safety interlock function

• Disconnect power and, if applicable, shut off gas before service
• Use appropriate hand tools; retain existing screws and hardware unless replacements are provided
• Note latch orientation and spring position before removal to ensure proper reassembly
• Test door closure and operation after installation before returning to service

This Frame is an OEM part for Frigidaire microwaves. Designed to provide structural integrity and aesthetic appeal, this frame is a crucial component for the proper alignment and protection of the microwave's door and interface. 

The degradation of a microwave frame can occur due to physical impacts, frequent usage, material fatigue, or environmental factors. A compromised frame can affect the door alignment, sealing, and overall look of the microwave.

Symptoms of a bad frame include:

• Difficulty in opening or closing the microwave door.
• A visible gap or misalignment of the door.
• Cracks or breakages on the frame itself.
• Unusual noises when the door is in operation.
• The door not sealing properly, leading to heat loss or inefficient cooking.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Grill is an OEM part for Frigidaire microwaves. It is responsible for covering and protecting the vent opening on the microwave, ensuring proper airflow and ventilation during operation.

A bad vent grill can be caused by physical damage, discoloration, or wear and tear over time. Signs of a faulty vent grill include cracks, missing pieces, or an unattractive appearance.

Symptoms of a bad vent grill can include:

• Restricted airflow or poor ventilation during use
• Steam or condensation inside the microwave
• Discoloration or damage to the grill

Replace your damaged or worn-out vent grill with this genuine OEM part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This complete door assembly replaces a damaged or worn refrigerator door to restore proper closure and appearance. It provides a factory-style front panel so your appliance seals and functions correctly without drafts. What it does:

• Replaces the full outer door structure so the door closes flush and helps maintain internal temperature.
• Restores mounting points and handle attachment if the original door is dented, cracked, or warped.
• Helps stop cold air leaks and reduces frost buildup caused by a misaligned or damaged door.
• Returns the appliance to a finished, factory-look exterior when the existing door is cosmetically damaged.

• Disconnect power to the appliance and empty door shelves before starting.
• Have a second person available; door assemblies can be heavy and awkward to handle.
• Keep fasteners and hinges aligned during installation; follow the manufacturer's torque recommendations.

Replacement refrigerator door handle that restores a secure, easy-to-grip surface for opening and closing. Matches original mounting points for a direct swap when a handle is cracked, loose or broken. What it does

• Provides a sturdy grip for opening and closing the refrigerator door.
• Replaces cracked, broken or loose handles that can prevent the door from closing properly.
• Fits the cabinet using the refrigerator's original mounting points for a straightforward replacement.
• Helps keep the door sealed and functioning by restoring proper alignment when a damaged handle interferes with operation.

• 1 replacement door handle

• Use caution and basic hand tools; do not overtighten fasteners to avoid cracking the handle or door.
• Retain any original screws, clips or mounting hardware; this part is typically a direct-fit and often installs using existing hardware.

The Magnetron is an OEM part for Frigidaire microwave ovens. Located behind the waveguide plate inside the microwave chamber, the magnetron generates electromagnetic waves to cook and heat food. Powered by a high-voltage transformer, a magnetron coil focuses 2.45GHz radio waves through the waveguide into the cavity.

Causes of a bad magnetron can include failures of the cathode filament or insulator over extended use, depletion of filament or high voltage components.

Symptoms of a bad Magnetron include:

• Slow or incomplete cooking even on high power 
• Discolored or burnt spots on food
• No visible arcing yet cavity runs continuously
• Oversparking sounds or burning smells from chamber

This genuine OEM Frigidaire magnetron is compatible with Electrolux, Gibson and some Kenmore microwave models as well.

This temperature control thermostat regulates refrigerator temperature to keep food safely chilled. It replaces a faulty control to restore proper cycling and temperature stability for the fresh food compartment. What it does:

• Senses cabinet temperature and opens/closes the compressor/coolant circuit to maintain set temperature
• Can stop excessive cooling or prevent the compressor from running continuously when failing
• Commonly used when the refrigerator is too warm, too cold, or runs nonstop
• Works with mechanical temperature dials and capillary-sensor assemblies on compatible units

• Disconnect power to the appliance before servicing to avoid shock
• Handle any attached capillary sensor tube gently; avoid kinks or sharp bends
• Verify correct mounting and electrical connections; match terminals to the old thermostat