Ffsc232ls5 Parts

This trough drain channels defrost and condensation water from the evaporator area to the refrigerator drain pan, helping prevent pooling and ice buildup. Fits as the replacement evaporator-area drain trough in compatible refrigerators. What it does:

• Collects and directs defrost/condensation water away from the evaporator compartment
• Helps prevent water pooling inside the fresh food or freezer section
• Reduces ice formation around the evaporator area when functioning properly
• Works with the drain tube and pan to route water safely to the drain pan

• One trough drain

• Disconnect power to the appliance before starting any service
• Remove interior shelves, drawers, and the evaporator cover to access the trough
• Inspect surrounding seals and the drain tube for clogs; clear any debris before installing
• Reassemble panels and restore power; run a short defrost cycle or pour warm water to verify proper drainage

This user interface is the front control panel assembly that lets you select and confirm appliance settings. Replacing a faulty interface restores reliable button response and clear touch/display feedback for normal operation. What it does:

• Provides the tactile buttons/touch surface and display elements used to set cycles, temperatures, and timers
• Sends user commands to the appliance's control electronics so selections are registered and executed
• Commonly replaces interfaces that have unresponsive or stuck buttons, blank or flickering displays, or incorrect response to inputs
• Helps resolve intermittent control issues when the interface itself is the source of the problem

• One user interface/control panel assembly

• Disconnect power to the appliance before starting any service to avoid shock or damage
• Handle the panel and display area carefully to avoid cracking or scratching; some panels include fragile ribbon connectors
• Confirm connectors are fully seated and screws are tightened but not over-torqued during reassembly

A replacement water tube that routes water from the household supply to the refrigerator's dispenser and/or ice maker, restoring reliable water flow and preventing leaks when the original line is damaged. What it does:

• Carries potable water between the inlet valve, dispenser, and ice maker.
• Replaces cracked, split, or clogged tubing that can cause leaks or reduced water flow.
• Helps stop intermittent or continuous dripping from inside the cabinet when the tube is compromised.
• Supports proper ice production and steady dispenser flow when intact.

• One water tube

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing interior panels or the back cover; handle plastic fittings and clips gently to avoid breakage.
• Inspect related fittings, grommets and clamps for wear; replace if damaged to prevent future leaks.

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This evaporator coil cover protects the refrigerator's evaporator assembly and helps direct airflow for more consistent cooling. It replaces a damaged or missing interior cover to keep the coil shielded and the compartment operating as intended. What it does:

• Shields the evaporator coil from contact and debris to prevent accidental damage
• Helps direct cold air across the evaporator for more even cooling performance
• Reduces unwanted airflow patterns that can cause frost buildup or uneven temperatures
• Covers sharp edges on the evaporator assembly for safer access during service

• One evaporator coil cover

• Disconnect power to the appliance before beginning any repair
• Remove interior panels and shelves as needed to access the evaporator area
• Handle the evaporator and cover carefully to avoid bending fins or damaging nearby components
• Fully defrost the evaporator before installing the new cover

This upper hinge cover protects and conceals the refrigerator's top door hinge for a finished look and safer edges. It restores proper appearance after damage or wear and helps keep the hinge area clean. What it does:

• Covers the upper door hinge to hide hardware and reduce dirt buildup
• Protects fingers and clothing from exposed hinge parts
• Restores cabinet appearance when the original cover is cracked or missing
• Works with the existing hinge assembly; does not affect door alignment when intact

• One upper hinge cover

• Designed to snap or slide into place over the upper hinge; may require removing the hinge trim or loosening the hinge for access
• Use basic hand tools; avoid over-tightening hinge fasteners after reassembly
• Disconnect power to the appliance if required for safe access to the hinge area
• Replace damaged components before installing the cover

This tension spring provides the restoring force needed for a moving appliance component, helping the part return to its normal position and restoring proper balance for smooth operation. What it does

• Provides tension to assist a hinged or moving component in returning to position
• Restores balance so doors, lids or levers open and close smoothly
• Helps prevent slamming or drooping of the attached component
• Common symptom: component won't stay open, won't return, or moves unevenly

• One tension spring

• Replace with the exact OEM spring number to ensure fit and safe operation
• Use proper tools and keep hands and fingers clear of stored energy when removing/ installing springs
• Disconnect power before working on electrical or moving parts

This shelf trim replaces the front edge molding on a refrigerator shelf to restore a finished look and help secure the shelf glass. It improves shelf appearance and helps keep items from sliding off the front edge. What it does:

• Replaces damaged, cracked, or missing front shelf trim that exposes the glass edge
• Helps hold the shelf glass in place and covers the shelf front for a neat finish
• Eliminates sharp or rough shelf edges that can catch items or cause injuries
• Restores proper fit and appearance after impacts or wear

• Disconnect power if working near electrical components; remove all items from the shelf first
• Gently lift or remove the shelf glass per your model's instructions to access the trim
• Trim typically snaps or slides onto the shelf front; align carefully and press until seated
• Handle glass and plastic parts carefully to avoid damage; use basic hand tools only if required by your model

This channel-shelf mounting piece secures a refrigerator shelf in its track, keeping shelves stable and aligned for safe storage. Fits into the shelf track to support glass or wire shelves and prevent shifting during use. What it does:

• Provides a secure track for sliding or fixed refrigerator shelves
• Holds shelf edges level to prevent items from tipping or falling
• Helps maintain proper shelf spacing and alignment inside the cabinet
• Commonly replaced when the shelf no longer seats or the channel is cracked or bent

• Use basic hand tools; remove the shelf before removing or installing the channel
• Inspect adjacent clips and shelf supports for wear and replace if needed
• Handle glass shelves carefully to avoid breakage during installation

This genuine replacement clip secures appliance components to keep panels and small parts aligned and stable, restoring fit and function. It's a small, durable fastener used where a simple snap or hold is required. What it does

• Holds trim, panels, or small components in place to prevent rattling or misalignment
• Restores secure fit where a damaged or missing clip causes loose parts
• Helps stop vibration noise caused by unsecured pieces
• Small, direct-fit part—replaces a single broken or lost clip

• Disconnect power to the appliance before starting any repair.
• Access may require removing trim or panels; keep track of fasteners.
• Press or snap the clip into place; do not force beyond fit—if it won't seat, recheck alignment.
• Wear gloves and eye protection to avoid cuts from sharp edges.

A replacement clamp that secures flexible hoses or tubing to fittings to help prevent leaks and keep connections tight. Fits where a small spring-style or band clamp is used on water or drain hoses. What it does

• Holds hoses or small tubing firmly to appliance fittings to maintain a sealed connection
• Helps stop leaks and reduce movement that can wear or disconnect hoses
• Commonly used on drain and water line connections where a compact clamp is needed
• Works with flexible rubber or plastic hose materials; choose correct size for a secure fit

• One clamp

• Disconnect power and shut off the water supply before beginning work
• Drain residual water from hoses to avoid spills
• Use appropriate pliers or a screwdriver depending on clamp type; avoid over-tightening
• Inspect hose ends and fittings for damage and replace any worn components for a reliable seal