Ffsc232ls5 Parts

This ice auger drives and feeds ice from the ice maker/bin toward the dispenser so your refrigerator can deliver ice reliably. It replaces a worn or damaged auger to restore proper ice movement and help prevent jams. What it does:

• Rotates inside the ice bin or dispenser housing to move ice toward the outlet.
• Works with the auger motor and drive components to enable ice dispensing.
• Common symptom: ice dispenser motor runs but little or no ice is delivered.
• Common symptom: ice jams or broken fins on the auger that prevent smooth feeding.

• Disconnect power to the refrigerator before beginning any work.
• Remove ice bin and any surrounding trim to access the auger; follow your model's service instructions.
• Inspect mating gears and the auger motor for wear; replace damaged components as needed.
• Reassemble carefully, restoring power and testing the dispenser with small amounts of ice.

This wiring harness is the appliance's pre-wired connector assembly that routes power and signals between the control and components, restoring proper electrical connections for reliable operation. What it does

• Connects control board, motors, sensors and switches so components receive power and communicate.
• Replaces damaged or frayed wiring that can cause intermittent operation or component failure.
• Stops symptoms like no power to a component, intermittent cycles, blown fuses or visible arcing at connectors.
• Ensures secure plug-to-plug connections and correct wire routing when installed correctly.

• Disconnect power to the appliance before attempting any repair to avoid shock.
• Compare the harness and connector shapes to the original before installing; route wires away from heat and moving parts.
• Secure connectors fully until they click; do not force mismatched plugs.
• If terminals are corroded or connectors are damaged at either end, replace harness or repair terminals per OEM instructions.

This tube connector is a small water-line fitting that joins refrigerator water and ice-maker tubing, restoring a secure path for water flow. It helps stop leaks and regain consistent water delivery to the dispenser or icemaker. What it does:

• Joins two sections of refrigerator water tubing to maintain a watertight connection
• Stops leaks at a damaged or worn tube joint
• Restores water flow to the ice maker or dispenser when a broken connector is the cause
• Compatible with rigid and soft tubing in typical refrigerator plumbing layouts

• One tube connector

• Shut off the refrigerator water supply before servicing
• Inspect tubing ends and replace damaged tubing or seals as needed
• Use proper fittings and tighten to manufacturer torque; avoid over-tightening

This lower-front kickplate grille replaces a damaged or missing refrigerator lower trim to restore appearance and protect the area beneath the doors. It keeps the front of the appliance looking finished while allowing airflow where designed. What it does:

• Replaces a cracked, broken, loose, or missing lower kickplate to improve cabinet appearance
• Covers the exposed lower cabinet opening and protects internal components from accidental contact
• Maintains designed airflow/venting at the refrigerator base (where applicable)
• Provides a secure fit to reduce rattles or gaps at the bottom front

• One lower kickplate grille (single piece as listed)

• High-level replacement: usually secures with clips and/or screws along the cabinet base—remove the old grille and snap or fasten the new one in place
• Keep power off and remove any loose debris from the area before beginning work
• Inspect mounting tabs and screws for damage; replace hardware if worn to ensure a secure fit

This switch kit is an electrical switch assembly used to restore reliable control of affected appliance functions. It replaces a worn or failed switch so the unit responds correctly to user inputs and power commands. What it does:

• Replaces a faulty or unresponsive control switch that can prevent operation or cause intermittent power/command issues
• Restores proper opening/closing or on/off signaling for the associated control circuit
• Helps eliminate symptoms like no response to button presses, intermittent operation, or a stuck switch
• Matches OEM fit and mounting points for a direct replacement when the original switch has failed

• One switch kit assembly

• Turn off and unplug the appliance or disconnect power at the breaker before beginning work
• Follow the appliance manufacturer's disassembly steps to access the switch; avoid damaging nearby wiring or components
• Verify electrical connections are secure and oriented as original; test function before fully reassembling

A replacement sliding basket that restores smooth, stable drawer movement in refrigerator or freezer compartments so stored items slide out easily for access. Replaces a worn or damaged basket assembly to keep storage organized. What it does:

• Provides a rolling/sliding drawer surface so you can pull stored items out without tipping or spilling
• Restores proper track engagement when original basket binds, jams, or comes off the rails
• Helps stop excessive wobble, scraping, or uneven travel caused by worn parts
• Supports normal item storage and retrieval without altering fridge function

• High-level replacement: remove contents and existing basket, align onto tracks, and slide into place until it clicks/locks
• Use basic hand tools only; do not force parts—inspect tracks and rollers for damage before installing
• Disconnect power only if service requires working near electrical components; otherwise power-down not typically required for interior basket swaps
• If any mounting hardware or clips are missing/damaged, replace them to ensure secure operation

This upper hinge cover protects and finishes the refrigerator door hinge area for a clean look and to keep the hinge free of debris. Replaces cracked or missing covers to restore appearance and help prevent dirt buildup. What it does

• Covers the upper door hinge to shield the hinge mechanism from dust and spills
• Prevents debris from collecting around the hinge that can affect movement
• Restores finished appearance when original cover is broken, cracked, or lost
• Helps keep hinge area easier to clean and maintain

• Snap-on/slide-on replacement; no special tools typically required
• Align cover over the upper hinge and press until it seats securely
• Inspect hinge for damage before installing; replace hinge hardware if worn
• Disconnect power only if needed for adjacent service; follow manufacturer safety guidance

This water filter housing replaces the refrigerator's filter enclosure to restore proper filter seating and secure water flow. It provides a stable mount for the cartridge and helps prevent leaks or loose filter fit. What it does:

• Holds and seals the replaceable water filter cartridge inside the refrigerator
• Ensures correct alignment so water flows through the filter element as designed
• Can stop leaks or drips caused by cracked or damaged housings
• May resolve reduced water flow or poor filter seating issues

• Turn off the water supply and unplug the refrigerator before starting work
• Remove the old housing and inspect seals; replace damaged O-rings or gaskets as needed
• Hand-tighten fittings to avoid over-torquing; follow OEM instructions for torque and alignment