Fftr2045v8 Parts

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

Replacement shroud that covers and protects internal components, restores the appliance's finished appearance, and helps reduce rattling and minor airflow issues caused by a cracked or missing cover. What it does:

• Protects internal wiring, connectors and components from dust, debris and accidental contact.
• Helps keep panels and components in place to reduce vibration and rattling noises.
• Aids basic airflow direction around enclosed parts to support normal cooling/venting.
• Common symptom indicators: cracked or missing cover, visible exposed components, or increased noise.

• Disconnect power to the appliance before beginning any service.
• Remove trim or outer panels and any retaining screws/clips to access the shroud; basic hand tools are usually required.
• Handle edges carefully—metal/plastic edges can be sharp. Preserve original fasteners for reassembly.

This bottom right door hinge assembly restores proper door alignment and smooth pivoting for refrigerators. Replaces a worn or damaged hinge to reduce door sag and help the door close evenly for better sealing and performance. What it does:

• Provides a new bottom pivot point so the refrigerator door opens and closes smoothly
• Corrects door sagging or misalignment that can prevent a tight seal
• Reduces rubbing or binding at the door bottom that can cause uneven wear
• Restores proper door clearance to improve overall cabinet fit and operation

• High-level task: remove and support the door before replacing the bottom hinge; two people may be needed for safe handling
• Use hand tools; avoid forcing components and follow the appliance manufacturer's service instructions
• Wear gloves and eye protection; keep hinges and pins clean and properly seated during reassembly

This replacement cover protects the appliance's control area and internal components from dust, debris, and accidental contact. It restores a finished appearance and helps keep controls and wiring safely enclosed. What it does

• Shields the control board and wiring from spills, dirt, and everyday wear
• Prevents accidental contact with controls or electrical connections
• Helps maintain a secure fit and finished look to the control area
• Common symptom: cracked, warped, or missing cover exposing internal parts

• One replacement cover

• Disconnect power to the appliance before starting any work
• Remove any trim or screws that hold the old cover in place; many covers use clips—lift gently to avoid breaking tabs
• Align tabs or screw holes on the new cover and secure without overtightening

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This refrigerator door hinge replaces a worn or damaged hinge to restore proper door alignment and smooth opening. It secures the door to the cabinet and helps the gasket seal correctly for efficient cooling. What it does:

• Supports and pivots the refrigerator door so it opens and closes smoothly
• Keeps the door aligned to maintain a tight seal and consistent internal temperature
• Common fix for a sagging, crooked, or noisy door
• Helps prevent rubbing or catching between the door and cabinet

• Disconnect power and empty or support the door before removing hinge hardware
• Remove any shelves or items that block hinge access to avoid damage
• Tighten mounting screws to manufacturer torque; replace missing/damaged fasteners

This is a bottom right door hinge assembly for refrigerators that supports and guides the door for smooth opening and secure closing. Replaces a worn or damaged hinge to restore proper door alignment and operation. What it does:

• Supports the lower corner of the refrigerator door and bears its weight
• Guides door swing so the door opens and closes smoothly
• Helps maintain proper door alignment and an even seal
• Common symptom: door sagging, dragging, uneven gap, or difficulty closing

• Unplug the appliance and remove contents or secure shelves before starting
• Support the door while removing/installing the hinge to prevent dropping or damage
• Reuse original fasteners if in good condition; replace damaged screws or pins as needed
• Check door alignment after installation and adjust per manufacturer instructions

This stainless steel freezer door kit replaces a damaged or dented freezer door to restore your freezer's appearance and help maintain a proper seal. Designed as a direct-fit replacement for compatible models. What it does:

• Replaces a scratched, dented or corroded freezer door surface
• Restores proper door alignment and helps maintain interior temperature
• Improves appliance appearance with a stainless steel finish
• Stops drafts and reduces moisture buildup caused by damaged doors

• Disconnect power to the appliance before beginning any repairs
• Installation may require removing the hinge pins and lifting the old door off; two people can help handle the door safely
• Handle and hinge hardware may need transfer from the old door
• Follow model-specific instructions and use proper tools to avoid damage

This replacement door kit restores a damaged or worn appliance door so it closes securely and looks like new. It's an exact-fit repair part designed to return proper door function and help prevent leaks, drafts, or heat loss. What it does

• Replaces a cracked, dented, or otherwise damaged door to restore appearance and operation
• Restores proper door closing and sealing to reduce leaks, drafts, or temperature loss
• Corrects alignment issues caused by bent or worn door components
• Stops rattling or movement caused by broken or missing door parts
• Helps ensure latches and hinges engage as intended for safe use

• One door kit

• Disconnect power and/or gas and follow the appliance manufacturer's safety instructions before beginning
• Use basic hand tools; support the door during removal to avoid dropping or damage
• Inspect surrounding seals, hinges, and latch for wear and replace if needed for best results

A replacement mounting screw used to secure appliance panels, trim, and components. Restores proper fit and helps reduce rattling or movement for a tighter, safer assembly. What it does

• Secures panels, brackets, and trim to keep parts aligned and stable.
• Replaces lost, stripped, or damaged screws that cause loose or vibrating panels.
• Helps prevent gaps that can allow movement or noise during operation.

• Disconnect power and/or gas to the appliance before beginning any repair.
• Use the correct screwdriver or bit to avoid stripping the head.
• Tighten until snug; avoid over-tightening which can strip threads or damage parts.
• If threads are damaged, replace with the correct OEM screw size and type.