Fg4322es Parts

This 1/4-20 nut secures related fasteners in appliance assemblies to keep components aligned and stable. It's a direct-fit replacement when the original nut is worn, stripped, or missing. What it does:

• Threads onto a 1/4-20 bolt or stud to lock parts together
• Restores tight mechanical connections that reduce vibration and noise
• Helps maintain proper alignment of panels, brackets, or linkage
• Commonly replaced when the original nut is rounded, corroded, or loose

• One 1/4-20 nut

• Use the correct 1/4-20 bolt or stud size and thread engagement
• Tighten to manufacturer torque if specified; avoid over-tightening
• Inspect adjoining parts (bolt, washer, bracket) for wear before reassembly
• Turn off and unplug the appliance before performing repairs

Color: Black/natural. Nylon

This is a replacement screw used to secure appliance panels and components. It restores proper fastening to stop rattles and keep parts aligned for reliable operation. What it does:

• Secures trim, brackets, or small panels to the appliance
• Prevents loose parts that can cause vibration, noise, or improper sealing
• Restores factory fastening where a screw is missing or damaged
• Simple, single-purpose fastener — use where the original screw was installed

• Use the matching screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread or component damage
• Disconnect power or follow appliance safety steps when working near electrical components
• Replace only the screw(s) that match the original size and type

This replacement slider is the small plastic guide that helps a drawer, bin or tray move smoothly along its track so the compartment opens and closes reliably. It restores proper alignment and reduces scraping or sticking. What it does:

• Guides and supports a drawer/bin/tray along its track for smooth movement
• Helps restore proper alignment so the compartment closes evenly
• Reduces scraping, binding, and noisy operation during use
• Prevents excess wear on the track and adjacent components

• One replacement slider

• Remove power and empty the drawer/bin before replacing the slider
• Most sliders snap or slide into a track; align and press until it clicks into place
• Inspect the mating track for cracks or debris and clean before installation

This water fill tube routes potable water from the valve to the ice maker or dispenser, ensuring a steady fill for ice production and dispenser operation. It replaces a cracked, kinked or leaking tube to restore proper water flow. What it does:

• Directs water from the water valve to the ice maker or dispenser
• Prevents leaks and improper fills when the original tube is damaged or clogged
• Helps stop visible leaks or slow/partial fills commonly caused by cracks or kinks
• Compatible with systems that use a routed plastic fill tube between valve and ice maker/dispenser

• One replacement water fill tube

• Turn off water supply and unplug the appliance before replacing the tube
• Inspect tubing connections and use proper clamps or fittings when securing the replacement
• Trim ends squarely and seat fully to avoid leaks; do not overtighten fittings

This cover assembly replaces the plastic trim that surrounds the refrigerator dispenser and keeps the dispenser area looking finished and protected from everyday wear. Restores proper appearance and helps prevent debris from reaching internal components. What it does:

• Replaces cracked, broken or missing dispenser trim to restore a clean, finished look
• Helps shield the dispenser opening from spills and debris that can affect operation
• Supports mounting for dispenser controls or actuator components
• Can stop light drafts and reduce moisture exposure around the dispenser area

• One cover assembly

• Disconnect power to the appliance before beginning work to avoid electrical shock
• Remove dispenser front panel or bezel per your model's service instructions to access mounting screws/clips
• Use basic hand tools (screwdriver, nut driver) and handle plastic parts gently to avoid damage

This guide helps a refrigerator drawer or bin slide smoothly and stay aligned, restoring stable movement and preventing binding. It's a simple replacement that improves drawer tracking and reduces noise from misalignment. What it does

• Guides the drawer/bin along its track to maintain proper alignment.
• Reduces rubbing, catching, and uneven movement when opening or closing.
• Helps prevent drawer jams and uneven wear on adjacent components.
• Works as the replacement guide component for the original factory slide assembly.

• Remove power to the appliance and empty the drawer before beginning work.
• Usually installs with simple clips or screws; keep fasteners from the old part for reuse if intact.
• Inspect mating tracks and rollers for damage or debris and clean before installing the new guide.

This evaporator coil circulates cold refrigerant to absorb heat inside the freezer compartment, restoring proper cold temperatures and efficient operation. Replace a damaged or corroded evaporator to stop frost buildup and improve cooling consistency. What it does:

• Absorbs heat from the freezer compartment so the fridge can maintain cold temperatures.
• Circulates refrigerant as part of the sealed cooling system.
• Common symptoms of a failing evaporator: excessive frost or ice on the evaporator, reduced or uneven cooling, and long run times for the compressor.
• Works with the freezer's defrost system; severe corrosion or leaks will compromise defrost and cooling.

• One evaporator coil assembly.

• Disconnect power before beginning any repair and follow basic electrical safety.
• Inspect and clear the defrost drain and surrounding gaskets while the freezer is open; replace any damaged fasteners or insulation as needed.
• Test the appliance after installation and monitor for proper defrost cycles and cooling before returning to normal use.

This condenser assembly is the refrigerator heat-exchange coil and support frame that helps remove heat from the refrigerant so the appliance can maintain proper cooling. Replaces a worn or damaged condenser to restore normal cooling performance. What it does:

• Transfers heat from the refrigerant to the surrounding air so the compressor and refrigeration cycle can work efficiently
• Restores normal cooling when the condenser is bent, corroded, or leaking
• Helps prevent compressor overheating when functioning correctly

• One condenser assembly (coil and mounting frame)

• Disconnect power to the appliance before starting any repair
• Take care handling fins and tubing; edges can be sharp and coils can be punctured
• Verify fit and mounting locations against your model's parts diagram before installation

This replacement roller is a small support wheel that helps appliance doors or drawers move smoothly and stay aligned. It restores quiet, steady operation and reduces sticking or uneven travel when worn rollers cause binding. What it does

• Replaces a worn support wheel to restore smooth sliding or rolling motion
• Helps maintain proper door/drawer alignment and prevents scraping
• Reduces noise and sticking caused by cracked or flattened rollers
• Supports weight transfer so moving parts operate evenly

• One replacement roller

• Power off and unplug the appliance before starting any repair
• Access may require removing a kick plate, drawer, or door—keep fasteners organized
• Inspect adjacent tracks or mounts and replace any damaged clips or screws

This single water inlet valve regulates water flow into your refrigerator. When energized, it opens to supply water and closes to stop it—restoring consistent filling for ice production and any water dispensing your model supports.

• Controls on/off water flow to the ice maker and/or dispenser (model dependent)
• May resolve no ice, slow or hollow cubes, or a dispenser that won't dispense or is weak
• Can correct intermittent dripping or leaks at the rear caused by a valve that won't fully close
• A humming valve with little or no water flow can indicate a failed solenoid or internal blockage

• Unplug the refrigerator and shut off the household water supply before servicing
• Place a towel/container to catch residual water; relieve line pressure if possible
• Note wire and tube locations; transfer to the new valve and seat/tighten fittings securely
• Restore water and power, then check all connections for leaks and run a test fill

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This replacement tubing routes water between components inside your appliance. It restores reliable, leak-resistant water flow when the original line becomes brittle, kinked, or damaged, helping dispensers and ice systems work properly on applicable models.

• Transports water between the inlet valve and internal components
• Replaces tubing that is cracked, brittle, kinked, or leaking
• Helps address issues like leaks, reduced dispenser flow, or ice maker fill problems on applicable units
• Maintains proper water flow and pressure within the line

• Disconnect power and shut off the water supply before servicing
• Place a towel or tray to catch residual water and relieve line pressure
• Note the original routing; transfer any retainers or clips from the old line; ensure connections are fully seated and ends are cut square if trimming is required
• Restore water and power, then check all connections carefully for leaks

This refrigerator door gasket creates a tight seal around the door opening to keep cold air in, reduce frost, and maintain stable temperatures. Replace a worn seal to stop air leaks and restore cooling performance and efficiency.

• Seals the perimeter of the refrigerator or freezer door to prevent warm air infiltration
• Helps maintain set temperatures and humidity; reduces frost and condensation near the door
• A damaged seal can lead to longer run times or the door not staying closed
• Common signs: tears, cracks, warping, visible gaps, frost along the gasket, moisture on the frame

• Disconnect power before servicing; open the door and remove the old gasket from its retainer
• Allow the new gasket to relax at room temperature; warming it in warm water helps remove kinks
• Clean the door channel; start corners first, then press the gasket fully into the retainer all around
• Close the door and check for uniform contact; adjust hinges/leveling as needed. Use gentle, low heat only to smooth waves

This electronic PC board is the appliance's central circuit board that manages core functions. Replacing a failed board restores proper control response and power to components so the unit starts, runs, and completes operations reliably.

• Interprets inputs from sensors and user controls to manage timing and operations
• Sends power to motors, valves, heaters, fans, or other loads as programmed
• Helps resolve symptoms like no power to controls, won't start, dead or unresponsive controls, or intermittent operation
• Addresses random stopping, error beeps/codes, or erratic component power

• Disconnect electrical power (and gas supply, if applicable) before servicing
• Handle the PCB by the edges and use anti-static protection
• Photograph/label connectors; move over any model-specific jumpers or mounting hardware from the original board
• Seat all connectors fully, secure the board, restore power, and test per your model's tech sheet