Fghs8665kf1 Parts

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

Replacement shelf assembly for the freezer compartment restores a sturdy, level surface for food storage and organization. Replace a damaged or missing shelf to recover capacity, maintain proper spacing, and keep items from shifting.

• Creates a rigid support surface for items in the freezer section
• Maintains intended storage layout and airflow when installed in the correct position
• Replaces a bent, broken, rusted, or missing shelf
• Helps prevent tipping and overcrowding that can damage contents

• Unplug the appliance and wear gloves for safety.
• Remove or relocate food; slide or lift the old shelf out of its supports.
• Align the new shelf with the rails or tabs and fully seat it.
• Verify the shelf is level and secure before loading.

This refrigerator water filter mount secures the filter head/housing to the liner so the cartridge seats squarely and seals. Replace a cracked or loose mount to restore a snug fit and help prevent leaks or vibration.

• Holds the water filter housing firmly in place
• Aligns the cartridge for proper engagement with the filter head
• Helps maintain a watertight seal at the filter connection
• Common symptoms: filter won't lock in or sits crooked, drips around the filter area, difficulty installing/removing the filter, or rattling from a loose housing

• Disconnect power and shut off the water supply; dispense water to relieve line pressure
• Remove the filter and any cover/trim to access the mount; retain existing screws for reuse
• Install the new mount and tighten screws gently to avoid cracking plastic
• Reinstall the filter, restore water and power, flush the dispenser, and check for leaks

A replacement fixed round blade that restores the appliance's original blade function and helps reduce vibration, noise or uneven performance caused by a worn or damaged blade. Use this OEM component for a proper fit and reliable operation. What it does

• Replaces a worn, bent or damaged fixed round blade to restore intended blade performance.
• Restores balance and smooth operation to the rotating assembly.
• Can reduce noise, wobble or uneven operation associated with a damaged blade.
• Matches OEM fit and function to help ensure correct alignment.

• Disconnect power to the appliance before beginning any work.
• Handle blade edges carefully; wear cut-resistant gloves if available.
• Remove and install per the appliance service manual or OEM instructions.

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This upper hinge cover protects and conceals the refrigerator's top door hinge for a finished look and safer edges. It restores proper appearance after damage or wear and helps keep the hinge area clean. What it does:

• Covers the upper door hinge to hide hardware and reduce dirt buildup
• Protects fingers and clothing from exposed hinge parts
• Restores cabinet appearance when the original cover is cracked or missing
• Works with the existing hinge assembly; does not affect door alignment when intact

• One upper hinge cover

• Designed to snap or slide into place over the upper hinge; may require removing the hinge trim or loosening the hinge for access
• Use basic hand tools; avoid over-tightening hinge fasteners after reassembly
• Disconnect power to the appliance if required for safe access to the hinge area
• Replace damaged components before installing the cover

The Ice Maker Cooling Duct is an OEM part for Frigidaire refrigerators. It directs cold air flow to the ice maker.

Causes of failure can be blockages or damage to the duct over time that impact efficient air flow.

Symptoms of a bad cooling duct include:

• Inconsistently shaped or formed ice cubes
• Slow or reduced ice production
• The ice maker failing to dispense ice properly
• Higher than normal interior refrigerator temperatures near the ice maker

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models. 

This genuine replacement clip secures appliance components to keep panels and small parts aligned and stable, restoring fit and function. It's a small, durable fastener used where a simple snap or hold is required. What it does

• Holds trim, panels, or small components in place to prevent rattling or misalignment
• Restores secure fit where a damaged or missing clip causes loose parts
• Helps stop vibration noise caused by unsecured pieces
• Small, direct-fit part—replaces a single broken or lost clip

• Disconnect power to the appliance before starting any repair.
• Access may require removing trim or panels; keep track of fasteners.
• Press or snap the clip into place; do not force beyond fit—if it won't seat, recheck alignment.
• Wear gloves and eye protection to avoid cuts from sharp edges.

A replacement clamp that secures flexible hoses or tubing to fittings to help prevent leaks and keep connections tight. Fits where a small spring-style or band clamp is used on water or drain hoses. What it does

• Holds hoses or small tubing firmly to appliance fittings to maintain a sealed connection
• Helps stop leaks and reduce movement that can wear or disconnect hoses
• Commonly used on drain and water line connections where a compact clamp is needed
• Works with flexible rubber or plastic hose materials; choose correct size for a secure fit

• One clamp

• Disconnect power and shut off the water supply before beginning work
• Drain residual water from hoses to avoid spills
• Use appropriate pliers or a screwdriver depending on clamp type; avoid over-tightening
• Inspect hose ends and fittings for damage and replace any worn components for a reliable seal

This air duct insulation cushions and seals the refrigerator/freezer air pathway to help reduce condensation and noise. It replaces worn or missing insulation that can allow cold-air leaks and excess moisture build-up. What it does:

• Fits around the internal air duct to help prevent air leaks and reduce moisture buildup.
• Helps minimize condensation and frost in the cabinet and on internal components.
• Dampens vibration and reduces airflow noise from the duct area.
• Restores proper airflow sealing after damage, deterioration, or previous part removal.

• Insulation air duct piece as shown

• Turn off and unplug the appliance before accessing internal components.
• Remove shelves, panels, and any fasteners as needed to reach the duct; keep track of hardware.
• Position the insulation exactly as the original and secure any clips or adhesive used by the manufacturer.

This upper hinge cover is a small plastic trim piece that snaps over the refrigerator's top door hinge to protect the hinge mechanism and improve the door's appearance. It keeps dirt and moisture away from the hinge and gives a finished look. What it does:

• Covers and protects the upper door hinge from dust, dirt, and moisture
• Helps prevent accidental contact with the hinge hardware
• Restores a clean, finished appearance to the door area
• Compatible with the factory hinge mounting location and shape

• One upper hinge cover

• Disconnect power to the appliance or follow manufacturer safety instructions before servicing
• Typically snaps or slides into place over the hinge; use care to avoid forcing or breaking the plastic
• Keep removed fasteners and trim parts organized for reassembly
• Support the door to prevent injury or damage