Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replace your worn freezer door gasket to restore an airtight seal, prevent cold air loss, and reduce frost buildup. Confirm fit by model number.
Loosened the top half screws, pulled the old seal out, put new seal in, snugged top screws, repeated process for the bottom. Went well, no problems. Read more
Freezer not cooling below 32°F or water leaking under freezer? The drier filter removes moisture from the refrigerant system. Soldering required.
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now! Read more
Bearing insert for freezer door hinges. Replaces worn or damaged bearings that cause stiff door operation or poor alignment. Installs in hinge bracket.
Removed door and replaced bottom bearing. Read more
Interior light bulb for freezers and refrigerators. Replace when bulb burns out, flickers, or dims to restore visibility inside your appliance.
Refrigerator in Costa Rica will repair when visit in late December. Read more
Adjustable leveling foot installs at the bottom of your appliance to ensure stability and proper leveling. Replace if broken, cracked, or missing.
I determined that it was a problem that occurred during the defrost cycle by resetting the GFCI outlet and forwarding the defrost timer until the defroster came on. Once the defrosting began, the GFCI outlet would reliably trip. I took apart the shielding inside of the freezer and tested the defrosting without the heating element or the thermostat connected. Since that looked good, I tested for proper functionality of the thermostat by removing it, placing it in a working freezer, and checking... Read more
Supports and pivots the freezer door at the top hinge point. Replace this hinge if cracked, broken, or worn to restore proper door alignment and swing.
Ordered the parts from AppliancePartsPros after another outlet had me on back order. The parts arrived and I installed them. We now are using our freezer. Read more
Freezer won't stay cold or runs too cold? A faulty heat exchanger disrupts refrigerant flow. Requires professional brazing and refrigerant recharge.
Carries defrost water from your freezer drain outlet to the drip pan. Replace if cracked, kinked, or detached to prevent leaks onto floors and cabinets.
Ordered a replacement Drain Hose. $9.95 shipping seems high for a $5.55 part but it was delivered next day. This was better than promised!!! I pulled of the old hose and replaced it with the new. No tools required. Working like a charm. Read more
Replace a stripped, missing, or damaged set screw that secures refrigerator or freezer door handles. Requires 3/32" allen wrench for installation.
I ordered a replacement handle and screws. The process was very easy with the help of one of your "pros" who found all the parts needed and took my order. I didn't realize I was getting both a refrigerator door handle and a freezer door handle in one set, but now we have the freezer handle if we need it. Removing the old handle and installing the replacement was very easy. It looks great, in fact the replacement is metal, whereas the original was plastic, so it looks better than it ever did! Read more
Replaces cracked, broken, or missing glass shelf in your refrigerator. Restores a sturdy storage surface and helps contain spills inside the fridge.
Replacement power cord that delivers household electricity from wall outlet to your freezer. Needed when original cord is damaged, frayed, or has broken prongs.
I placed a order for a replacement cord. It was an exact fit. Whole process was about 10 minutes max. Read more
Hex head screw secures refrigerator door hinges to the cabinet. Replace if missing, stripped, or lost during moves or repairs. 1/4-20 thread size.
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
Seals the evaporator cover to prevent air leaks, frost buildup, and temperature fluctuations. Replace if worn or cracked. Verify fit with your model.
Volt Ohmmeter test indicated defrost thermostat and heater were OK. Defrost voltage measured ~25 VAC. I ordered all the most likely repair parts, but thought the control board had failed. I replaced the control board and the freezer has been working properly for several days. I haven't decided whether to keep or return the unused parts. I damaged the paint removing the electrical control. There must be a trick to protect the paint from the putty knife and screwdriver. Read more
Bottom front grille that covers the lower compartment while allowing airflow. Replace if cracked, broken, or missing to restore a finished appearance.
Ordered both parts from Appliancepartspros.com. The pictures of the website made it easy to order the correct parts. So far I've replaced the grill / kick plate. Took me longer to vacuum out the dust from the coils than it took to replace the part. Have not yet replaced the inner door panel. That will be a project for this coming weekend. Do not anticipate it being a problem to do so. Read more
Fix intermittent refrigerator operation caused by worn or heat-damaged component sockets. This receptacle restores secure plug-in connections for reliable performance.
Alignment sleeve bushing maintains smooth part movement in freezers and refrigerators. Replace when worn to eliminate play and restore operation.