Frfs282laf1 Parts

This is a replacement screw used to secure appliance panels and components. It restores proper fastening to stop rattles and keep parts aligned for reliable operation. What it does:

• Secures trim, brackets, or small panels to the appliance
• Prevents loose parts that can cause vibration, noise, or improper sealing
• Restores factory fastening where a screw is missing or damaged
• Simple, single-purpose fastener — use where the original screw was installed

• Use the matching screwdriver or bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread or component damage
• Disconnect power or follow appliance safety steps when working near electrical components
• Replace only the screw(s) that match the original size and type

The Screw is an OEM part for Frigidaire refrigerators. As a common fastener used throughout the appliance, screws hold panels, handles, components and more securely in place. Reliable performance depends on intact assemblies.

Causes of a bad screw can include wear and corrosion over time from constant vibration, as well as stripping or shearing from repeated securing and removal of parts during repairs.

Symptoms of a loose, damaged, or missing screw include:

• Rattling noises and vibration
• Doors, handles, or panels that are no longer flush or tightened securely
• Internal components that have shifted position

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This inverter is the electronic drive board that controls the refrigerator compressor motor, helping regulate cooling performance and energy use. Replaces a failed inverter to restore proper compressor speed control and steady operation. What it does:

• Converts DC/AC and controls compressor motor speed for variable-capacity cooling
• Helps maintain consistent temperature by adjusting compressor operation
• Works with the fridge's control system to manage power delivery and protection functions

• One inverter (compressor drive board) as shown

• Install only after disconnecting power to avoid shock or damage
• Handle the board by edges; avoid static discharge—use grounding strap if available
• Verify connector seating and mounting; use manufacturer's torque/fastening guidance when available

This main power control board is the refrigerator's primary PCB that manages power to key systems, restoring reliable control and electrical distribution for normal operation. It replaces a failed power/control board to resolve power-related faults. What it does:

• Routes and regulates electrical power to the fridge's major components (fans, compressor, lights, displays).
• Helps the appliance respond correctly to user inputs and internal sensors.
• Common symptoms: no power or unresponsive control panel, blank display, lights out, or intermittent operation.
• Stops electrical faults that cause irregular cycling or components failing to start.

• Disconnect the appliance from power before starting any work.
• Handle the board by the edges and avoid touching soldered components; observe ESD precautions.
• Verify wire match and connector seating before restoring power.

This hinge bracket secures and supports a refrigerator door hinge assembly so the door opens and closes smoothly and stays aligned. Replaces a worn or broken bracket to restore proper door fit and operation. What it does:

• Supports the door hinge assembly and keeps the door aligned
• Helps prevent door sag, uneven gaps, or doors that rub or scrape the cabinet
• Restores stable pivoting for smooth opening and closing
• Works with the hinge hardware to maintain proper door seal and cold retention

• Before beginning, empty the door and support it to prevent dropping; consider a helper for heavy doors
• Disconnect power to the appliance if instructed by the manufacturer for your model
• Use basic hand tools; tighten fasteners securely but avoid over-torquing
• If hinge hardware or pins are damaged, inspect and replace as needed for safe operation

The Fresh Food Door Gasket is an OEM replacement part for Frigidaire refrigerators. It creates a seal around the refrigerator door to maintain a consistent temperature by keeping cold air in and warm air out. This helps ensure proper refrigerator conditions and prevents energy loss.

Over time, gaskets can degrade due to wear, exposure to extreme temperatures, or cleaning with harsh chemicals. A damaged or worn gasket may fail to seal properly, affecting the freezer's efficiency and potentially leading to increased energy consumption.

Symptoms of a bad gasket include:

• Frost or ice buildup inside the refrigerator
• Difficulty keeping the refrigerator door fully closed
• Warm air entering the refrigerator, causing temperature fluctuations
• Increased energy bills due to inefficient operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

NOTE: GASKET NOW GRAY, NOT WHITE

This water filter manifold directs and seals the water flow to the refrigerator's filter housing so your dispenser and ice maker receive filtered water. Replaces a damaged or leaking manifold to restore proper water routing and pressure to the filter area. What it does:

• Channels incoming water into the filter housing and back to the dispenser/ice maker
• Provides mounting and a sealed connection point for the cartridge-style filter
• Commonly replaced for leaks, reduced water flow, or when the filter won't seat properly
• Works with the refrigerator's internal water plumbing and filter housing assembly

• One water filter manifold

• Turn off the refrigerator water supply and disconnect power before servicing
• Drain remaining water from lines and wear eye protection to avoid spills
• Inspect O-rings/seals and replace if damaged; hand-tighten fittings and avoid over-torquing

This dual-solenoid water valve controls water flow to the refrigerator dispenser and icemaker, restoring fill and dispensing when the machine calls for water. Replaces a worn or leaking valve to stop drips and restore normal water delivery. What it does:

• Opens and closes water flow to the icemaker and dispenser when energized
• Stops water flow when the appliance signals a fill cycle is complete
• Commonly replaced for leaks, no water to dispenser, or no water to the icemaker
• Works with the refrigerator's water supply line and wiring harness

• Turn off water supply and disconnect power before starting any repairs
• Inspect and replace any worn inlet tubing or mounting hardware as needed

This is the refrigerator door bin that mounts into the inner door liner to hold bottles, condiments, and jars. Replace a cracked or missing bin to restore secure storage and keep items organized and accessible.

• Provides dedicated storage on the door and keeps items contained during opening and closing
• Replaces a cracked, broken, or loose bin
• Common symptoms: bin falls off, won't stay seated, is missing, or is damaged
• Restores original door storage capacity and organization

• Remove all items from the old bin; disconnect power if working near interior lights or controls
• Lift the old bin straight up to release it from the door liner tabs or rails
• Align the new bin with the same location and press down until it seats firmly
• Do not force; if it doesn't seat, install it in the same position as the original

The Refrigerator Handle is an OEM part for Frigidaire side-by-side refrigerators. It provides a grip point to easily open and access fridge and freezer compartments. The handle must withstand constant use without breaking or losing functionality. 

Symptoms of a bad refrigerator handle include:

• Difficulty opening the refrigerator door  
• Loose, jagged, or unstable handle grip that poses a safety risk
• Cracks, chips or damaged plastic compromising structural integrity

Causes can be wear over years of heavy usage, exposure to heat or cleaning chemicals accelerating degradation, or physical impact resulting in breaks.

This OEM Frigidaire replacement handle is also compatible with some Electrolux, Crosley, and Amana refrigerator models.

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

The Defrost Heater Assembly is an OEM part for Frigidaire refrigerators. It is responsible for preventing excessive frost buildup on the evaporator coils by heating them during the defrost cycle.

A bad defrost heater assembly can be caused by electrical issues, component failure, or damage. When the defrost heater assembly becomes faulty, it can result in issues such as excessive frost accumulation in the freezer, poor cooling performance, or even a complete defrost system failure.

Symptoms of a bad defrost heater assembly include:

• Excessive frost or ice buildup on the evaporator coils
• Poor cooling in the refrigerator or freezer 
• Water leaking or pooling under the refrigerator
• Refrigerator running continuously 

Replace your faulty defrost heater assembly with this genuine OEM Frigidaire part to restore your refrigerator. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This housing is the main structural enclosure that supports and protects internal components, restoring proper alignment and safe operation. It replaces a damaged or cracked outer housing to reduce vibration and protect wiring and moving parts. What it does

• Provides structural support and mounting points for internal components.
• Protects internal parts from debris and physical damage.
• Helps reduce vibration and rattling caused by a cracked or broken housing.
• Restores proper alignment to maintain correct component clearances.

• One housing main assembly.

• Disconnect power and, if applicable, gas supply before starting any repair.
• Handle carefully to avoid damaging mounting tabs or paint; some trimming may be required for perfect fit on older units.
• If any fasteners, clips, or gaskets are worn or missing, replace them to ensure a secure installation.