Frfs282laf1 Parts

This housing is the main structural enclosure that supports and protects internal components, restoring proper alignment and safe operation. It replaces a damaged or cracked outer housing to reduce vibration and protect wiring and moving parts. What it does

• Provides structural support and mounting points for internal components.
• Protects internal parts from debris and physical damage.
• Helps reduce vibration and rattling caused by a cracked or broken housing.
• Restores proper alignment to maintain correct component clearances.

• One housing main assembly.

• Disconnect power and, if applicable, gas supply before starting any repair.
• Handle carefully to avoid damaging mounting tabs or paint; some trimming may be required for perfect fit on older units.
• If any fasteners, clips, or gaskets are worn or missing, replace them to ensure a secure installation.

This Ice & Water Module Assembly controls the refrigerator's dispenser and related ice/water functions so the dispenser and ice system respond correctly. It restores control signals between the dispenser controls and the valve/ice circuits. What it does:

• Routes user dispenser commands to the dispenser actuator and water/ice valves.
• Manages dispenser lights and switch inputs for water and ice selection.
• Can stop dispenser response or cause intermittent dispensing when faulty.
• Common symptom: dispenser unresponsive or only one function (ice or water) working.

• One Ice & Water Module Assembly

• Disconnect power to the appliance before beginning any work.
• Handle the module and connectors carefully to avoid bending pins or damaging wiring.
• Installation typically requires access behind the dispenser/control panel; keep screws and trim organized.

This door stop is the replacement part that limits door travel and cushions the refrigerator door for smoother closing and reduced impact. It helps restore proper door alignment and prevents the door from hitting the cabinet. What it does:

• Stops or limits door travel to prevent over-opening and cabinet damage
• Cushions door movement to reduce slamming and wear on hinges
• Helps maintain correct door alignment so the seal engages properly
• Commonly used when the door hangs unevenly, slams, or won't stay aligned

• Disconnect power or unplug the appliance if accessing electrical components is required.
• Support the door or remove it before replacing hinge or stop hardware.
• Basic hand tools usually required; keep track of small screws and clips.
• Test door operation and alignment after installation; adjust as needed.

Replacement drip pan that catches defrost and condensation water beneath the appliance to help keep the cabinet floor dry and reduce the chance of visible leaks or puddling. Simple swap to restore proper water collection. What it does

• Collects defrost and condensation water to channel it away from the cabinet floor.
• Helps prevent water stains and puddles under the appliance.
• Replaces cracked, warped, or missing factory trays that cause leaks or odors.
• Works with the appliance's drainage path to reduce floor-level moisture.

• One replacement tray.

• Disconnect power to the appliance before servicing.
• Remove contents, shelves or access panels as needed to reach the tray.
• Slide or snap the old tray out and position the new tray in the same orientation; secure any clips or fasteners used by the original part.

This ice container collects and stores ice produced by the refrigerator's ice maker, keeping ice accessible for dispensing and reducing spills in the freezer. Durable molded plastic matches factory fit for reliable daily use. What it does:

• Holds and stores dispensed ice so cubes are ready to use
• Guides ice toward the dispenser or access area for smooth retrieval
• Replaces cracked, warped or missing bins that cause ice spills or jamming
• Helps prevent ice from backing up into the ice maker when installed correctly

• Disconnect power to the refrigerator before removing or installing the ice container
• Remove any remaining ice before handling to avoid spills and slipping hazards
• Slide into the designated compartment; ensure it seats fully to prevent binding or ice jams

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

This replacement mounting screw fastens panels and components in compatible Frigidaire appliances to restore secure assembly and reduce rattling or loose parts. Simple fastener sized for the original factory location. What it does:

• Secures panels, brackets, or trim to keep parts aligned and stable
• Prevents vibration and noise caused by loose fittings
• Restores proper attachment after repair or disassembly
• Matches the OEM thread and length for a correct fit when specified

• Use the correct screw hole and do not force; cross-threading can damage components
• Tighten to a snug fit—do not overtighten to avoid stripping threads or cracking plastic
• Power tools can be used with care; slow speed and proper bit help prevent slippage
• Turn off power and disconnect the appliance before accessing internal parts

This air tower directs conditioned air from the evaporator into the cabinet to maintain even cooling. The integrated gasket seals the tower to the liner to prevent air leakage and help restore proper airflow and temperature balance. What it does:

• Channels cold air from the evaporator into refrigerator/freezer compartments for consistent cooling.
• Gasket creates a seal to prevent air bypass and reduce frost buildup on evaporator surfaces.
• Helps correct symptoms like uneven temperatures, warm spots, or reduced cooling performance.
• Restores proper airflow after damage or deterioration of the original tower or seal.

• Disconnect power to the appliance before starting any repair.
• Typical installation requires removing interior liners or the evaporator cover; handle plastic parts and gasket carefully to avoid tearing.
• Ensure the tower seats fully against the liner so the gasket can form a complete seal.

This main electronic control board manages refrigerator functions and user controls so your appliance responds correctly to settings. It replaces a failed board to restore normal control operation and display responses. What it does:

• Sends signals to compressors, fans, and defrost systems to regulate cooling cycles
• Powers and communicates with the front control/display so buttons and readouts work
• Can cause symptoms such as unresponsive controls, blank or erratic display, or failure of cooling-related components to run
• Works with the appliance's harness and sensors to interpret temperature and mode inputs

• Disconnect power at the outlet or breaker before starting to reduce shock risk
• Handle the board by its edges and avoid static discharge; use ESD protection if available
• Verify connector orientation and seat plugs fully; do not force connectors

The Frig Freshness Booster Refill is an OEM part for Frigidaire refrigerators. This refill helps maintain freshness by absorbing and removing odors from the refrigerator.

Causes of needing a new refill include the natural depletion of the absorption material over time through repeated use and odor elimination. Refills are intended to be replaced periodically to ensure optimal freshness performance.

Symptoms of a refill needing replacement include:

• Lost ability to fully absorb odors
• Deterioration or break down of the absorption material
• Excessive build up of odors inside the refrigerator

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This water filter facia is the exterior faceplate that finishes and secures the refrigerator's cartridge-style water filter assembly, restoring a clean appearance and proper filter retention at the dispenser area. What it does:

• Covers and secures the water filter housing, keeping the filter cartridge in place
• Restores a finished look when the original faceplate is cracked, chipped, or discolored
• Helps maintain the correct filter alignment for a proper seal and fit
• Prevents debris from entering the filter compartment and the dispenser area

• One water filter facia/faceplate

• Turn off the refrigerator's water supply before removing or reinstalling the filter or facia
• Remove the filter cartridge per the refrigerator manual to access the facia if required
• Use basic hand tools; avoid forcing clips or tabs to prevent breakage

This rubber grommet cushions and secures appliance components, reducing vibration and wear while helping maintain proper alignment. It's a small replacement part that restores quiet operation and prevents metal-on-metal contact. What it does:

• Cushions or isolates moving parts to reduce noise and vibration
• Provides a snug mount or seal where components pass through panels
• Helps keep trim, panels or wiring from rubbing and wearing
• Commonly replaced when parts become loose, cracked, or noisy

• Disconnect power before attempting any repair.
• Access may require removing a panel or trim piece; use trim tools to avoid damage.
• Ensure the grommet seats fully in the mounting hole and that retained parts align correctly.
• Replace if torn, hardened, or deformed; do not install a damaged grommet.

This tension spring provides the restoring force needed for a moving refrigerator component, helping parts return to their normal position for reliable operation and alignment. It's a simple replacement that restores proper movement and stability. What it does:

• Provides tension to return or hold a component in place during normal operation
• Helps maintain proper alignment and smooth movement of the associated mechanism
• Worn or broken springs can cause improper latching, sagging, or uneven movement
• Replacing a damaged spring often resolves related noise or binding issues

• One replacement spring

• Disconnect power before attempting any repairs to avoid electrical hazards
• Handle springs carefully; they can be under tension and may require basic tools to remove/install
• Replace with the exact part number to ensure fit and function

This evaporator fan motor circulates cold air across the freezer and refrigerator evaporator coil to keep compartments at the correct temperature and maintain even cooling. What it does

• Spins the evaporator fan blade to move cold air through the evaporator and into the cabinet.
• Helps prevent frost buildup on the evaporator coil by maintaining steady airflow.
• Common symptoms: refrigerator runs but won't stay cold, uneven cooling between compartments, or loud/grinding noise from the freezer area.
• Replacing the motor restores airflow and can stop temperature problems caused by a failed fan motor.

• One evaporator fan motor (motor only). Mounting hardware or fan blade included only if explicitly stated on the product page.

• Unplug the appliance before starting work to avoid electrical shock.
• Remove interior panels or evaporator cover per the service manual; be cautious of sharp sheet metal and cold/freezer components.
• Verify blade orientation and secure wiring harness as shown in the OEM manual; do not force connectors.

This hinge assembly supports and lets your refrigerator door pivot smoothly, restoring proper alignment and reliable closing. It replaces a worn, bent, or broken hinge to reduce door sag, rubbing, or noisy operation. What it does:

• Provides the pivot point for the refrigerator door so it opens and closes correctly
• Restores proper door alignment to help seals meet the cabinet and maintain a tight closure
• Stops or reduces door sag, scraping, and uneven gaps
• Eliminates clicking or grinding noises caused by a damaged hinge

• Unplug the appliance and remove food and shelves as needed before starting
• Support the door while removing and installing the hinge to prevent damage or injury
• Use the correct tools and follow OEM alignment steps; tighten fasteners securely but do not overtighten

This hinge assembly secures and guides the refrigerator door so it opens and closes smoothly. Replacing a worn or damaged hinge restores proper door alignment and helps the seal engage for better cooling performance. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Guides smooth opening and closing to prevent sagging or binding
• Helps maintain a consistent door seal to reduce air leaks
• Stops excessive noise or scraping caused by worn hinge components

• One hinge assembly

• Unplug the appliance and empty or support the door before starting
• Use proper tools and follow manufacturer instructions; a second person may be needed to hold the door
• Inspect surrounding mounting points and hardware; replace any stripped screws or damaged brackets