Gdf52opsj Parts

The Tub Insulation Blanket is an OEM part for GE dishwashers. This insulation blanket wraps around the dishwasher tub, helping to reduce noise during operation and improve energy efficiency by maintaining consistent temperatures inside the dishwasher.

Causes of a bad insulation blanket can include wear and tear over time, exposure to moisture, or damage from pests or improper installation.

Symptoms of a bad tub insulation blanket include:

• Increased noise levels during the dishwasher cycle
• Higher energy consumption or longer cycle times
• Visible damage or deterioration of the insulation material
• Excessive heat escaping from the dishwasher

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Upper Spray Arm is an OEM part for GE dishwashers. It is designed to distribute water evenly throughout the upper rack during the wash cycle, ensuring that all dishes are thoroughly cleaned. The spray arm rotates to provide coverage and spray patterns that reach every dish and utensil. The arm measures about 10 inches by 2.5 inches

Over time, the upper spray arm can become clogged with food particles or mineral deposits, which can impede its function. Physical damage or wear and tear can also cause it to fail.

Symptoms of a bad upper spray arm include:

• Dishes on the upper rack not getting clean
• Reduced water pressure from the upper arm
• Spray arm not spinning or moving properly
• Visible cracks or damage to the spray arm

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results.

The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying.

Symptoms of a bad ultra-fine filter include:

• Food particles or sediment left behind on dishes after the cycle completes
• Cloudiness or film remaining on glassware that is difficult to wipe away
• The shortened lifespan of other filter components due to excessive debris built-up

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dishwasher Float is an OEM replacement part for GE dishwashers. Located in the dishwasher's sump area, the float plays an important role in detecting water levels and ensuring proper filling and draining during cycles.

Causes of a bad float include normal wear and tear, mineral buildup within the dishwasher, or accidental impact damage.

Symptoms of a bad float include:

• Improper or inconsistent water level filling the dishwasher
• Inability to fully drain water after cycles
• Delayed cycles or unusual noises related to water functions

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Countertop Screw & Buttonplug is an OEM part for GE dishwashers. This assembly includes screws and button plugs designed to securely fasten the dishwasher to the underside of kitchen countertops. 

Causes of a bad Countertop Screw & Buttonplug can include stripped threads from over-tightening, corrosion due to exposure to moisture, or general wear and tear that diminishes the screws' and plugs' ability to maintain a secure hold. 

Symptoms of a bad Countertop Screw & Buttonplug include:

• Dishwasher tilting forward when the door is opened
• Visible gaps between the dishwasher and countertop
• Loose feeling or movement of the dishwasher when pushed
• Screws failing to hold or remain in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Valve is an OEM part for GE dishwashers. It controls the flow of water into the dishwasher during the wash and rinse cycles.

You should replace the water valve if it becomes defective or worn out. Over time, mineral deposits can build up, or the internal components can fail, leading to improper water flow. This can affect the dishwasher's performance and water efficiency.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Low water pressure during the cycle
• Leaking water from the valve area
• Dishes remaining dirty due to insufficient water

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Hinge Pulley is an OEM part for GE dishwashers. This part works with the door springs and cables to provide smooth and balanced movement. This pulley ensures that the door operates efficiently, making it easy to load and unload dishes.

Causes of a bad door hinge pulley can include wear and tear from regular use, accumulation of debris or grease, or damage from accidental impacts.  

Symptoms of a bad door hinge pulley include:

• The dishwasher door not staying open or closed properly
• Difficulty in opening or closing the door
• Unusual noises during door operation, such as squeaking or grinding
• The door feeling loose or unbalanced

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dishwasher door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door action, prevents sudden slamming, and reduces stress on the hinges and link components.

• Provides the tension that counterbalances the door's weight during opening and closing
• Helps prevent the door from dropping quickly or feeling unusually heavy
• Supports smooth, even movement within the door hinge/counterbalance system
• Common signs of failure: door falls open, won't stay partially open, or binds/squeaks while moving

• Disconnect power and shut off water before servicing; wear gloves and eye protection
• Remove the toe-kick to access the spring and hinge area
• Support the door; carefully relieve spring tension and transfer the spring to the same anchor points as the original
• Test door balance and motion before reinstalling the toe panel

This diverter assembly kit controls the dishwasher's wash-water routing. It switches flow between spray arms for targeted cleaning. Replacing a failed diverter restores proper water distribution and helps recover normal wash performance.

• Directs wash water between lower and upper/middle spray arms as the cycle advances
• Works with the control to provide zone/alternating spray for efficient cleaning
• Failure can cause poor cleaning on one rack or water spraying from only one arm
• May produce repeated clicking/grinding from the sump area or extended cycles while indexing

• Disconnect power and shut off water supply before servicing; expect some residual water
• Access the diverter at the sump/pump area; follow your model's service procedures
• Ensure seals/O-rings are properly seated and parts are aligned before tightening
• Run a short test cycle to check for leaks and confirm both racks receive spray

This right-hand roller cover is the small retainer that locks a dishwasher rack roller onto its mount. Replacing a cracked or missing cover restores smooth, stable rack movement and helps prevent the roller from working loose during use.

• Secures the right-hand rack roller to its axle/mount
• Helps the rack slide smoothly and stay level
• Replaces covers that are cracked, worn, or missing
• Symptoms include: rack binding on one side, tilting/dropping, rattling, or a roller that pops off

• Disconnect power and shut off water before servicing
• Pull the rack forward and remove if needed to access the roller area
• Release the old cover's locking tabs; align and snap the new cover into place on the right-hand side
• Ensure the rack rolls smoothly and sits level; right- and left-hand pieces are not interchangeable

This main wash pump kit restores strong water circulation to drive the spray arms for thorough cleaning. Replace if the existing pump is weak, noisy, or leaking to recover proper wash performance.

• Circulates wash water through the spray arms during wash and rinse cycles
• Maintains proper water flow for consistent cleaning results
• Common failure signs: poor cleaning or no spray action, loud humming or grinding from the base, or leaks around the pump area

• Disconnect power and turn off the water supply before servicing
• Access the pump from the bottom; remove the toe-kick and pull the unit as needed
• Expect residual water—use a towel or pan; note hose and wire positions
• Seat seals fully and secure clamps; run a short test cycle to check for leaks

This 10-32 x 9/16 machine screw secures dishwasher components and panels. Replacing a missing or stripped fastener restores a tight fit, reduces vibration/rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, or internal assemblies using a 10-32 machine thread
• Replaces lost, corroded, or stripped screws
• Can help resolve looseness or rattling from a loose mounting point
• Correct 9/16-inch length helps maintain proper spacing and alignment

• Disconnect power at the breaker before servicing
• Use the appropriate driver for the screw head; start threads by hand to avoid cross-threading
• Tighten snugly but do not overtighten to prevent stripping threads or damaging mating parts
• Compare to the original fastener to matching thread and length

• Thread size: 10-32
• Length: 9/16 inch

The Hub is an OEM replacement part for GE dishwashers. It is the central mechanism which attaches to the tub and facilitates rotation of the upper spray arm above dishes. 

Causes of a bad hub include wear from years of repeated rotation, accumulation of hard water scale deposits inside moving parts, or accidental impact damage. This reduces proper function over time.

Symptoms of a bad hub include:

• Loud clunking or grinding noises from the center mechanism
• Reduced cleaning performance on upper racks or portions of dishes  
• Dishes showing water spots or soil in sections not adequately rinsed
• Inability to attach or move the upper spray arm assembly smoothly

This OEM GE hub replacement is also compatible with Crosley, and KitchenAid models.

This dishwasher main control board kit is the central circuit board that directs all wash functions. Replacing a failed board restores proper power distribution and timing so cycles start, advance, and finish correctly, helping prevent intermittent shutdowns and erratic operation. What it does:

• Controls cycle timing and communicates with sensors
• Distributes power to the wash motor, drain pump, inlet valve, and heater
• Works with the door latch and user interface to start/stop the cycle
• Failure may cause no power/won't start, stalled cycles, blinking lights/error codes, or incorrect filling, draining, or heating

• One main control board kit

• Disconnect power at the circuit breaker; turn off water if moving the dishwasher for access
• Board is typically in a housing beneath the unit—use ESD precautions and keep connections dry
• Photograph/label wire harnesses; transfer connectors one at a time to the new board
• Restore power and run a test or rinse cycle to proper operation