Gdf52opsj Parts

The Turbidity Sensor is an OEM part for GE dishwashers. It is a water quality monitor that detects small food particles in the rinse water during dishwashing cycles. The sensor plays an important quality control role by ensuring water has achieved the necessary clarity before terminating the rinse phase.

Symptoms of a bad turbidity sensor include:

• Incomplete or unsatisfactory rinsing results
• Cycles not advancing properly beyond the rinse stage
• Error codes related to turbidity detection

Causes can be mineral deposits interfering with the sensor's ability to transmit light through the water, or failure of the electronic components over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Rack Roller is an OEM component compatible with GE dishwashers. Located on the rack guide rails inside the washer tub, it facilitates smooth gliding of rack shelving in and out for easy loading and unloading. 

Causes of failure can include cracked/warped rollers from years of continual movement, accumulation of debris preventing free motion, or detachment of roller heads compromising installation.

Symptoms include:

• Difficulty fully extending or retracting racks  
• Off-tracking of shelving from left to right rails
• Scratches or damage to dishware from improper rack functioning 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: This kit contains both the Circulation Pump and Drain Pump along with a harness and clamps. Due to a factory revision, the pumps are no longer offered individually.

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Float Mounting Tube O Ring is an OEM component specifically designed for GE dishwashers. This float mounting tube o-ring creates a watertight seal around a tube that helps monitor water levels using a float and switch assembly.  

Causes of a bad float mounting tube o-ring can include cracks, tears or warping that prevents proper sealing. Chemical exposure from regular dishwasher use can cause o-rings to degrade over time.

Symptoms of a bad Float Mounting Tube O Ring include:

• Water leaks in the area around the tube fitting  
• Moisture or water damage near water level monitoring components
• Irregular or improperly timed cycles from inaccurate water level readings
• Safety issues from undetected pooling or overflow of water

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Wire Harness is an OEM part for GE dishwashers. It is a critical wiring assembly that connects major components like the motor, heating element, and control board. Smooth signal transmission through the harness allows for optimized cycle progression.

Symptoms of a bad Wire Harness can include:

• Intermittent operation of certain functions 
• Repeated error codes related to specific components
• Strange odors emitting from the harness area
• Noticeably worn or cracked insulation on wires

Causes are often normal wear over countless vibration cycles, cracking and age-hardening of wires, or damage due to rodents or impact. 

Replace yours today with this genuine OEM GE part to ensure reliable system communication. With its precise design and durable construction, the Wire Harness facilitates fully integrated performance wash after wash. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Harness ASM DC is an OEM part for GE dishwashers. As the main wiring harness, it connects the control board to other components like the motor, sensors, and heating elements.   

Causes of a bad Harness ASM DC can include cuts, cracks, or failure in the insulation over time which can cause shorts. Rodent damage is also common.

Symptoms of a bad wiring harness include:

• Components failing to power on or work properly  
• Repeated tripping of the circuits
• Fault codes related to component connectivity issues
• Physical deterioration or rodent chewing of the wires

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dishwasher hose clamp secures internal hoses to pumps or fittings, helping prevent leaks and disconnections. Replace a weakened or damaged clamp to restore a tight, reliable seal at the connection.

• Provides clamping pressure to hold a hose on pump, sump, or drain fittings
• Helps stop water leaking at hose joints
• Resolves: loose or disconnected hoses, water under the unit/base, or poor draining from a slipped drain hose
• Replaces worn, rusted, or deformed clamps after service

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward as needed for access; place a towel or pan to catch residual water
• Seat the hose fully, then compress or tighten the clamp per its design; position just behind the hose barb bead
• Run a short cycle and inspect for leaks at the connection

The Door Harness Assembly is an OEM part for GE dishwashers. It consists of all the necessary electrical wiring and connectors that power components located on the dishwasher door. This includes things like the door latch, control buttons, status lights, and seal heater. 

The door harness allows communication between the control board and door-mounted parts, facilitating functions like sensing when the door is closed or activating buttons. It powers safety and interface features through the whole door area.

Causes of a bad door harness can include cracked wiring insulation, loose connections from opening/closing the door, or water intrusion over time. 

Symptoms of failure include: 

• Lights or buttons not working on the door 
• Inability to sense when the door is closed
• Failure of the door lock or other motorized parts
• Intermittent or unreliable door control behaviors

It is also compatible with Hotpoint, RCA and select Kenmore models.

This vent gasket seals the dishwasher's door vent to keep steam and splashes inside the tub. Replacing a worn seal helps prevent leaks around the vent area and maintains proper moisture control during wash and dry cycles. What it does:

• Seals the vent housing to the inner door liner
• Helps prevent water and steam from escaping at the vent opening
• Addresses leaks or drips from the top/vent area of the door
• Replace if the original gasket is torn, flattened, brittle, or misshapen
• Helps maintain the intended airflow path through the vent assembly

• 1 vent gasket

• Disconnect power to the dishwasher before servicing
• Remove inner door panel screws to access the vent assembly
• Note gasket orientation; clean mating surfaces and seat the new gasket evenly without stretching
• Reassemble and run a short cycle to check the vent area for leaks

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

This dielectric shield is a small heat-resistant insulator that protects ignition wiring and components from heat and prevents electrical arcing near burners. It helps maintain reliable spark ignition and reduces risk of shorts or damage from high temperatures. What it does:

• Shields spark module wires and electrode areas from direct heat exposure
• Helps prevent arcing and electrical shorts that can interrupt ignition
• Reduces risk of melted or damaged wire insulation near burners or ovens
• Commonly replaced when cracked, deformed, or showing burn marks that affect ignition

• Disconnect power (and gas if applicable) before servicing electrical or ignition components
• Inspect surrounding wiring and connectors; replace any damaged insulation or terminals
• Reinstall using original mounting hardware and ensure the shield fully covers the wire/electrode area

The Shelf Cup is an OEM component specifically designed for GE dishwashers. It is a rack shelf to provide stability for stemmed glasses. Subject to chemical deterioration and physical stresses, shelf cups can crack or warp over time. 

Symptoms of a bad shelf cup include:

• Cup no longer securely holds stemmed glasses in place during washing 
• Cracks along weakened seams 
• Deformation preventing proper nesting of stemware bases

Causes of shelf cup degradation relate to continuous exposure to hot water and washing chemicals combined with the physical stresses of loading and unloading stemware.

Replace yours today with this genuine GE OEM part to maintain rack integrity. Proper glass support ensures unobstructed wash spray coverage. This GE replacement part is compatible with some Hotpoint, RCA, and Kenmore models.

This grounding plate is a stamped metal bracket that provides a secure electrical ground connection for the appliance, helping protect components and reduce shock risk. It's a direct-replacement part used where the appliance chassis requires a dedicated grounding point. What it does:

• Provides a reliable chassis-to-ground connection for electrical safety.
• Maintains a stable grounding path for control boards and metal panels.
• Helps address symptoms such as intermittent electrical faults, tripped breakers, or grounding-related error codes when a damaged or missing bracket is suspected.
• Replaces a corroded, bent, or broken grounding/mounting plate to restore proper contact.

• One grounding plate

• Turn off power to the appliance at the breaker and unplug before servicing.
• Mount to the specified chassis location using the original screws or fasteners; ensure clean, bare metal contact for a good ground.
• Do not modify the part; if screw holes or fasteners are missing, replace with OEM-specified hardware.

This small plastic clip secures a refrigerator's wiring conduit or harness to the cabinet, keeping wires routed and protected from abrasion. It helps reduce strain on connections and prevents wires from contacting moving parts. What it does:

• Holds wiring conduit or harness in place to maintain neat routing
• Prevents wires from rubbing on sharp edges or moving components
• Reduces strain on electrical connections that can cause intermittent faults
• Helps maintain safe separation between wiring and high-heat or mechanical areas

• Turn power off at the appliance and unplug before inspecting or replacing wiring clips
• Remove access panels only as needed to reach the clip; avoid stressing surrounding wires
• Snap the clip into the original mounting slot or replace any damaged fasteners for a secure fit
• If wires show damage or burns, replace the wiring/harness