Gdf530pgmobb Parts

This gray dishwasher vent releases moist air from the tub during the dry cycle on hybrid-dry models. Replacing a damaged vent helps control steam and condensation for more consistent drying and a cleaner door area.

• Directs steam out of the tub during hybrid drying
• Helps reduce interior condensation for improved drying results
• If cracked, warped, or loose, you may notice steam escaping at the door, moisture on the console, or dishes that stay wet
• Visible damage or discoloration around the vent area can indicate replacement is needed

• Disconnect power at the circuit breaker before servicing
• Access is typically through the inner door panel; handle sharp edges and note original orientation
• Ensure the vent seats evenly and fasteners are secure without overtightening
• Run a short cycle and check for proper venting/steam control after reassembly

The Flat Chrome Badge is an OEM part for GE refrigerators. It is responsible for displaying the GE logo and model information on the front of the refrigerator. As an identifiable brand marker, the badge contributes to the overall appearance and style of the appliance.

Causes of a bad badge can include damage from impacts or bending, discoloration or tarnishing over time, or simple wear and tear that renders the badge appearance faded or illegible.

Symptoms of a bad badge include:

• A missing, loose, crooked or illegible badge
• Signs of denting, scratching or corrosion
• An outdated or inconsistent badge that doesn't match the model

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This 10-32 x 1/4-inch zinc-plated screw secures internal panels and hardware in select dishwashers. Replace a missing, stripped, or corroded fastener to restore a tight fit and help prevent vibration or loosening during operation.

• Fastens brackets, panels, or components that use a 10-32 machine thread
• Replaces hardware that is missing, stripped, or rusted
• Helps reduce rattling or vibration from loose assemblies
• Supports proper component alignment for reliable operation

• Disconnect power and water supply before servicing the appliance
• Remove the old fastener and verify thread size and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace damaged clips, nuts, or inserts that won't hold a 10-32 screw securely

The Door Harness Assembly is an OEM part for GE dishwashers. It consists of all the necessary electrical wiring and connectors that power components located on the dishwasher door. This includes things like the door latch, control buttons, status lights, and seal heater. 

The door harness allows communication between the control board and door-mounted parts, facilitating functions like sensing when the door is closed or activating buttons. It powers safety and interface features through the whole door area.

Causes of a bad door harness can include cracked wiring insulation, loose connections from opening/closing the door, or water intrusion over time. 

Symptoms of failure include: 

• Lights or buttons not working on the door 
• Inability to sense when the door is closed
• Failure of the door lock or other motorized parts
• Intermittent or unreliable door control behaviors

It is also compatible with Hotpoint, RCA and select Kenmore models.

This dishwasher fill funnel guides water flow into the appropriate channel, helping ensure proper distribution during wash cycles. Replacing a warped or damaged funnel can prevent leaks and restore consistent spray performance.

• Directs water into the dishwasher's internal water feed path
• Helps maintain correct water pressure for spray arms
• Common failure signs: leaking at the funnel area, poor spray performance, residue on dishes, or misalignment with the water feed tube
• Physical damage, warping, or a loose fit are typical replacement indicators

• Disconnect power and turn off water supply before servicing
• Access from inside the tub; remove any retaining screws or clips
• Inspect and reuse existing hardware/seals if still in good condition
• After installation, run a short cycle and check for leaks or misalignment

This fill funnel hose directs incoming water from the inlet assembly into the tub through the fill funnel. Replacing a worn or cracked hose helps stop leaks and restores a reliable, sealed fill path for consistent wash performance.

• Carries water from the inlet assembly through the fill funnel into the tub
• Maintains a watertight path to prevent external leaks
• Symptoms of failure: dripping during fill, puddles beneath the unit, or visible cracks/splits in the hose
• A significant leak may lead to low water level or extended fill times

• Disconnect power and shut off the water supply before servicing
• Remove the toe-kick/kickplate; pulling the dishwasher forward may be needed for access
• Place a towel or pan to catch residual water; move clamps, remove the old hose, and fully seat the new hose on both fittings
• Re-secure clamps, restore water and power, and run a short fill to check for leaks before reinstalling panels

This control box top is the plastic cover that protects the appliance's control board and user controls while keeping the front of the console finished and safe. It helps prevent dust, moisture, and accidental contact with internal electronics. What it does

• Covers and protects the control board and internal wiring behind the console.
• Provides the mounting surface and openings for buttons, knobs or touch interfaces.
• Prevents dirt, lint, and moisture from reaching sensitive electronics.
• Restores a secure, finished appearance to a damaged or cracked console area.

• Always disconnect power to the appliance before beginning work to avoid electrical shock.
• Remove any bezel, screws or clips securing the old top and transfer any required mounting hardware or trim pieces.
• Handle the control board and connectors with care; avoid touching circuit components or bending contact pins.

The AC Harness Assembly is an OEM part for GE dishwashers. As an integral part of the electrical system, this harness is designed to safely connect and supply power to critical components underneath the tub. 

Causes of failure involve cracked insulation, damaged connectors, or grounding problems developing over extended use.

Symptoms of a faulty harness include:

• Intermittent operation of systems or cycles  
• Error codes related to electrical malfunctions
• Loose, detached, or rubbed wires exposing live circuits

This OEM GE replacement is also compatible with select Hotpoint, RCA and select Kenmore models.

Replacement fill funnel hose that routes incoming water into the appliance's fill system. Restores proper water flow to the fill inlet and helps stop leaks at the funnel connection when the original hose is cracked or worn. What it does:

• Channels incoming water from the inlet to the appliance fill assembly.
• Replaces cracked, split, or collapsed funnel hoses that can cause leaks.
• Common symptoms it can fix: water leaking at the funnel connection, slow or incomplete fill, water pooling beneath the appliance.
• Simple direct-replacement part—matches the original funnel hose routing and connection points.

• Always disconnect power and shut off the water supply before servicing the appliance.
• Inspect mating fittings, clamps, and seals; replace clamps or seals if corroded or damaged.
• Use basic hand tools to remove and secure hose clamps; avoid twisting or kinking the hose during installation.

This bracket support hinge secures the appliance door to the cabinet, providing a stable pivot point for smooth opening and closing. Replaces a worn or broken hinge bracket to help restore proper door alignment and operation. What it does:

• Provides a mounting point for the door hinge to keep the door aligned and secure
• Prevents door sagging, uneven gaps, or misaligned closing caused by a damaged bracket
• Reduces wobble, clicking, or binding at the hinge area during door movement
• Works as the structural support between the door and cabinet to maintain proper sealing/contact

• One bracket support hinge

• Disconnect power and empty the door (shelves/drawers) before starting for safety and easier handling
• Support the door while removing/installing the hinge to prevent dropping or damage
• Use basic hand tools; follow OEM torque and alignment guidance when tightening fasteners

The Third Rack Tray is an OEM part for GE dishwashers. It provides an additional level of loading space for smaller dishes and utensils above the lower racks. 

Causes of a bad third rack tray can include deformations from overloading or use of improper loading patterns. Repeated impact from loading or unloading can also cause damage over time. 

Symptoms of a bad third rack tray include:

• Difficulty sliding racks in/out or level rack operation
• Warping, bending, or blocking the functionality of upper spray arms  
• Dishes not receiving adequate wash coverage due to spacing issues
• Rattling noises or loose movement during wash cycles

This OEM GE part is compatible with Hotpoint, RCA, Asko, and some Kenmore models. 

This replacement vent restores proper air flow for non-fan appliance models, helping exhaust heat and cooking odors while protecting internal components from debris. A direct-fit OEM-style vent for units that do not use a powered blower. What it does:

• Channels exhaust air and heat away from the appliance to maintain safe operating temperatures
• Helps prevent buildup of debris and grease in the vent opening
• Can reduce intermittent overheating and cooking odors caused by a damaged or missing vent
• Restores proper fit and appearance at the appliance vent outlet

• One replacement vent

• Disconnect power to the appliance before beginning any service
• Access may require removing the lower kick panel or outer cover
• Use basic hand tools; align clips or screw holes and avoid forcing the part into place

This bracket support hinge helps secure and guide the appliance hinge assembly, restoring proper door alignment and reliable movement. It replaces a worn or damaged hinge support to improve fit and operation. What it does:

• Supports the hinge assembly to maintain correct door alignment
• Reduces door sag, binding, or uneven closing caused by a damaged bracket
• Restores smooth hinge movement and helps prevent further wear to hinge components
• Commonly used when the door feels loose or the hinge appears bent or broken

• One bracket support hinge

• Turn off and unplug the appliance before starting any repair
• Remove surrounding panels or trim as needed to access the hinge per your model's service instructions
• Use appropriate tools and keep fasteners organized for reassembly
• Inspect and replace additional components as needed

This user interface board fits dishwashers with an 8-button control panel. It interprets button presses and illuminates the panel, relaying your selections to the main control so cycles start and run as expected. What it does:

• Reads button inputs and powers the panel indicators
• Communicates selections to the main control to initiate/manage cycles
• Restores responsive controls when keys don't work or lights are dark
• Helps address no-start, erratic panel behavior, or only some keys working

• 1 configured 8-button user interface board

• Disconnect power at the breaker before servicing
• Use ESD protection and handle the board by its edges
• Note ribbon cable/connector positions; take photos to guide reassembly
• Transfer any panel, bracket, or overlay components from the original as required

The Sump Manifold is an OEM part for GE dishwashers. It is responsible for collecting and filtering food particles and debris during the wash cycle. It helps maintain clean water circulation and protects the dishwasher's internal components from damage caused by debris.

A bad Sump Manifold can lead to issues such as poor cleaning results, clogging, or even damage to the dishwasher's pump. Causes of a bad sump manifold can include wear and tear over time, accumulation of debris that cannot be effectively filtered, or damage to the manifold due to mishandling.

Symptoms of a bad Sump Manifold include:

• Residue or food particles remaining on dishes
• Water not draining properly from the dishwasher
• Unusual noises during the wash cycle, such as grinding or rattling sounds
• Leaks or pooling water at the bottom of the dishwasher

Replace your worn-out or damaged Sump Manifold with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This rail and end cap assembly replaces a worn or broken rack rail so the appliance rack glides smoothly and stays secured. It restores proper support and reduces catching, slipping, or noisy movement during use. What it does:

• Supports the appliance rack and provides a smooth sliding track.
• Replaces damaged or cracked rails and end caps that cause the rack to catch or bind.
• Helps prevent the rack from slipping off the track or dropping when extended.
• Reduces grinding, scraping, or other abnormal noises tied to worn rail components.

• Turn off power to the appliance (unplug or shut off the breaker) before starting.
• Remove the rack and align the rail with the track; snap or slide the end cap into place per the appliance's service instructions.
• Use basic hand tools if needed; avoid excessive force to prevent breakage.