Gdp615hbmots Parts

This high loop drain hose creates the required elevated drain loop to help prevent dishwasher backflow and ensure proper drainage. It replaces a worn or damaged drain loop and restores correct drain routing for reliable performance. What it does:

• Forms the high loop in the dishwasher drain line to reduce risk of sink water siphoning back into the appliance
• Directs wastewater from the dishwasher into the household drain properly
• Helps avoid intermittent draining issues caused by a collapsed or split drain loop
• Fits into existing drain connections—used where an elevated drain loop is required

• Designed for in-line replacement; route the hose to create a high loop secured under the countertop or cabinet as shown in the appliance installer instructions
• Turn off power and water supply to the appliance before performing service
• Inspect clamps and fittings and replace if corroded; ensure all connections are snug but not over-tightened

The Turbidity Sensor is an OEM part for GE dishwashers. It is a water quality monitor that detects small food particles in the rinse water during dishwashing cycles. The sensor plays an important quality control role by ensuring water has achieved the necessary clarity before terminating the rinse phase.

Symptoms of a bad turbidity sensor include:

• Incomplete or unsatisfactory rinsing results
• Cycles not advancing properly beyond the rinse stage
• Error codes related to turbidity detection

Causes can be mineral deposits interfering with the sensor's ability to transmit light through the water, or failure of the electronic components over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

TRANSITION PIECE ASM

The User Interface Control Board Cover is an OEM part for GE dishwashers. As a component responsible for holding the UI board.

Symptoms of a bad Silicone Light Pipe include:

• Dim or unlit indicator lights providing unclear status 
• Cracks or broken areas allowing water intrusion into electrical areas
• Detached or missing sections creating an incomplete appearance

Causes of a bad light pipe can include cracks, tears, or discoloration impairing light transmission over multiple years of use. Repeated door openings and closings subject it to mechanical stress.

This OEM light pipe part is also compatible with Hotpoint, RCA and select Kenmore models.

The Rack Roller is an OEM component compatible with GE dishwashers. Located on the rack guide rails inside the washer tub, it facilitates smooth gliding of rack shelving in and out for easy loading and unloading. 

Causes of failure can include cracked/warped rollers from years of continual movement, accumulation of debris preventing free motion, or detachment of roller heads compromising installation.

Symptoms include:

• Difficulty fully extending or retracting racks  
• Off-tracking of shelving from left to right rails
• Scratches or damage to dishware from improper rack functioning 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Black Tub Trim is an OEM part for GE dishwashers. This trim piece attaches to the inner tub and provides an attractive black accent around the wash chamber. It helps improve the aesthetic design and appearance of the dishwasher interior.

Causes of a bad tub trim can include damage from impact or exposure to moisture over time, which can lead to cracking or discoloration of the plastic. 

Symptoms of a bad tub trim include:

• Visible cracks or splits in the plastic material
• Sections of trim no longer securely attached 
• Discoloration that detracts from the look of the dishwasher interior

This authentic OEM GE replacement tub trim restores the dishwasher's appearance and design integrity. It is constructed of durable plastic designed to last through years of wash cycles.
 

This replacement hose feeds the Bottle Jets/Bottle Blaster feature on compatible dishwashers. It carries wash water to the jet manifold so tall, narrow items receive targeted spray and helps prevent leaks from a cracked or brittle line. What it does:

• Routes wash water to the Bottle Jets/Bottle Blaster manifold for targeted cleaning
• Maintains a sealed path so jets can spray inside bottles and other narrow containers
• Common symptoms: leaks at the hose or connections, weak/no bottle-jet spray, visible cracks, kinks, or a loose hose
• Helps restore bottle-jet performance when the original hose is damaged

• 1 hose

• Disconnect power at the breaker and shut off the water supply before servicing
• Pull the dishwasher forward and/or remove rack components as needed to access both hose ends
• Transfer/secure clamps, fully seat the hose on each barb, and route it to avoid kinks or rubbing
• Reassemble and run a short test cycle while checking all connections for leaks

The Clamp is an OEM replacement part for GE dishwashers. It holds and secures critical components such as tubing or hoses securely in place. Clamps play an important supporting role by fastening tubing and preventing kinking, both of which are essential for proper water flow and circulation within the dishwasher.

Causes of a bad clamp can include cracks, corrosion, or fatigue that causes the clamp to fail in its gripping function over time. Hoses or tubes may also wear down a clamp through constant vibration. 

Symptoms of a bad clamp include:

• Leaks from hoses, tubes or connections  
• Reduced water pressure or uneven spray patterns
• Moisture or water damage around connections
• Loose hoses that rub or chafe

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Bottle washer clip is an OEM part for GE dishwashers. Located on the upper rack, it secures slender items like baby bottles, utensils, and cups in an upright position for optimal cleaning. 

Causes of a bad bottle washer clip include wear and tear over time which leads to cracking or breaking of the plastic. Accidental mishandling during loading could also damage it.

Symptoms include: 

• Bottles and other items falling over during the wash 
• Inability to stand items up securely
• Missing or broken plastic clips

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Float Mounting Tube O Ring is an OEM component specifically designed for GE dishwashers. This float mounting tube o-ring creates a watertight seal around a tube that helps monitor water levels using a float and switch assembly.  

Causes of a bad float mounting tube o-ring can include cracks, tears or warping that prevents proper sealing. Chemical exposure from regular dishwasher use can cause o-rings to degrade over time.

Symptoms of a bad Float Mounting Tube O Ring include:

• Water leaks in the area around the tube fitting  
• Moisture or water damage near water level monitoring components
• Irregular or improperly timed cycles from inaccurate water level readings
• Safety issues from undetected pooling or overflow of water

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Wire Harness is an OEM part for GE dishwashers. It is a critical wiring assembly that connects major components like the motor, heating element, and control board. Smooth signal transmission through the harness allows for optimized cycle progression.

Symptoms of a bad Wire Harness can include:

• Intermittent operation of certain functions 
• Repeated error codes related to specific components
• Strange odors emitting from the harness area
• Noticeably worn or cracked insulation on wires

Causes are often normal wear over countless vibration cycles, cracking and age-hardening of wires, or damage due to rodents or impact. 

Replace yours today with this genuine OEM GE part to ensure reliable system communication. With its precise design and durable construction, the Wire Harness facilitates fully integrated performance wash after wash. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Bottle Hose Cover is an OEM replacement part for GE dishwashers. It refers to the protective plastic sheath that sleeves the circulation hose carrying water between the appliance and sink. Subject to prolonged exposure to heat and chemicals, the hose cover material can degrade.

Causes of a bad bottle hose cover include:

• Brittle or cracking vinyl from chemical deterioration over time
• Loose fit or sliding off the hose allowing kinks or sharp bends to form
• Holes or gaps exposing the underlying tubing to potential punctures

Symptoms of a failed hose cover include:

• Water leaks at connections if tubing is unprotected 
• Restricted water flow due to crimped tubing from improper routing
• Unsightly tubing detracting from the overall aesthetic

This GE replacement part is also compatible with some Hotpoint and RCA models.

This left-hand attachment strip secures trim and panels for a clean, finished fit on compatible GE appliances. It helps maintain proper alignment and prevents gaps that can collect dirt or allow panels to shift during use. What it does:

• Attaches and stabilizes a side trim or panel to the appliance cabinet
• Keeps door/side trim aligned to reduce rattling or shifting
• Helps maintain an even, finished appearance along the appliance edge
• Addresses symptoms like loose trim, visible gaps, or panel movement

• One left-hand attachment strip

• Remove power to the appliance (or disconnect power source) before starting work
• Use basic hand tools; avoid forcing parts to prevent breakage
• Replace with OEM-specified hardware if fasteners are missing or damaged

This dishwasher hose clamp secures internal hoses to pumps or fittings, helping prevent leaks and disconnections. Replace a weakened or damaged clamp to restore a tight, reliable seal at the connection.

• Provides clamping pressure to hold a hose on pump, sump, or drain fittings
• Helps stop water leaking at hose joints
• Resolves: loose or disconnected hoses, water under the unit/base, or poor draining from a slipped drain hose
• Replaces worn, rusted, or deformed clamps after service

• Disconnect power and turn off the water supply before servicing
• Pull the dishwasher forward as needed for access; place a towel or pan to catch residual water
• Seat the hose fully, then compress or tighten the clamp per its design; position just behind the hose barb bead
• Run a short cycle and inspect for leaks at the connection

This AC harness assembly carries incoming line voltage through the dishwasher to the control and other components. Replacing a damaged or heat-stressed harness restores safe, reliable power distribution and can resolve dead controls, no-start, or intermittent power issues.

• Distributes AC power from the dishwasher's power connection to the control and key components
• Provides correct wire routing with factory-terminated connectors for a secure fit
• Replace if wires are cut or melted, or if terminals show heat damage or looseness
• Common symptoms: won't power up or start, dead controls, intermittent power loss

• Disconnect power at the circuit breaker before servicing; verify power is off
• Remove toe-kick and access panels to reach the harness; note original routing and clips
• Move one connector at a time to the new harness; seat fully without forcing and avoid pinching
• Use the model's wiring diagram to confirm connections; secure wiring and reinstall panels