Gdp615hbmots Parts

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This grounding plate is a stamped metal bracket that provides a secure electrical ground connection for the appliance, helping protect components and reduce shock risk. It's a direct-replacement part used where the appliance chassis requires a dedicated grounding point. What it does:

• Provides a reliable chassis-to-ground connection for electrical safety.
• Maintains a stable grounding path for control boards and metal panels.
• Helps address symptoms such as intermittent electrical faults, tripped breakers, or grounding-related error codes when a damaged or missing bracket is suspected.
• Replaces a corroded, bent, or broken grounding/mounting plate to restore proper contact.

• One grounding plate

• Turn off power to the appliance at the breaker and unplug before servicing.
• Mount to the specified chassis location using the original screws or fasteners; ensure clean, bare metal contact for a good ground.
• Do not modify the part; if screw holes or fasteners are missing, replace with OEM-specified hardware.

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This service inner door assembly replaces a damaged or worn inner door panel to restore proper sealing and appearance inside the appliance door. It helps ensure the door closes correctly and protects internal components from debris and wear. What it does:

• Replaces the inner door panel/assembly to restore the door's internal structure and fit
• Helps stop rubbing, scraping noises or misalignment caused by a damaged inner door
• Protects internal components and gasket areas from debris and wear
• Restores proper surface for door latch and sealing interfaces

• One service inner door assembly

• Designed for technicians or experienced DIYers; refer to the appliance service manual for step-by-step disassembly/reassembly
• Disconnect power (and water if applicable) before starting work to avoid shock or water damage
• Use proper tools and support the outer door to prevent drops or damage while removing/installing the inner door
• Inspect door seals, hinges and fasteners during reassembly; replace any worn hardware as needed

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bottle blaster assembly supplies targeted wash water to the dishwasher's Bottle Jets to clean tall, narrow items like baby and sports bottles. Replace a damaged or clogged assembly to restore focused spray and top-rack cleaning performance. What it does:

• Routes wash water to the bottle jet nozzles for concentrated cleaning inside bottles and narrow openings
• Helps improve cleaning on items positioned over the Bottle Jets
• Failure symptoms include no spray from the bottle jets, poor upper-rack cleaning, leaks near the jet area, or visible cracks/damage

• 1 bottle blaster assembly

• Disconnect power and shut off water to the dishwasher before servicing
• Access the bottle jet area; release retaining clips/fasteners and note hose routing and connection points
• Transfer any reusable clips or seals from the original assembly if needed
• Fully seat connections; run a short cycle to check for leaks and proper jet spray

The Console Cover and Graphics Assembly is an OEM replacement part for GE dishwashers. It is responsible for covering and protecting the control panel and touchpad of the dishwasher. Over time, exposure to heat, chemicals, and general wear and tear can cause cracks or discoloration in the console cover. The graphics may fade or peel. 

Causes of a bad console cover include general degradation from usage and cleaning chemicals. 

Symptoms of a bad console cover include:

• Cracks or breaks in the plastic material
• Peeling or fading graphics that are difficult to read 
• Loose fit that allows access to internal components

Replace yours today with this genuine OEM GE part and upgrade your dishwasher’s appearance and ease of use. This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This door foam block cushions and seals the appliance door, helping reduce vibration and prevent drafts or leaks where the door meets the cabinet. It replaces worn or damaged foam to restore a tight, even door fit and quieter operation. What it does:

• Replaces the foam block located on the appliance door to restore proper sealing and contact
• Helps reduce noise and vibration caused by door movement or uneven contact
• Minimizes air or water leakage at the door seal when original foam is compressed or degraded
• Simple, passive component—no electrical function

• Install by removing the door trim or access panel per your model's service instructions
• Ensure the mounting surface is clean and dry before placing the foam for best adhesion and fit
• Use basic hand tools; avoid forcing the foam into place to prevent tearing
• Disconnect power and follow manufacturer safety guidance before servicing the appliance

This lens and adhesive assembly replaces a worn, cracked, or cloudy control/display lens and secures the lens to the appliance for a clean, finished appearance and protected electronics. Restores visibility and prevents debris entry behind the lens. What it does:

• Replaces a damaged or discolored control/display lens to improve visibility and aesthetics
• Includes adhesive to secure the lens and maintain a sealed fit over controls or indicators
• Protects underlying buttons, LEDs, and circuit components from dust and moisture
• Helps restore original appearance after impact, cracking, or peeling

• Disconnect power before servicing to avoid shock or unintended appliance operation
• Clean and dry mounting surface; remove old adhesive residues for proper adhesion
• Align lens carefully, press into place, and hold per adhesive manufacturer recommendations
• Allow adhesive to set fully before reconnecting power or using the appliance

This upper rack is the dishwasher basket that holds glasses, cups and small items on the top level so they wash reliably and stay organized. It restores proper loading and spacing for upper-rack dishes. What it does

• Replaces a cracked, bent or missing upper rack to secure cups, glasses and small bowls during wash cycles
• Restores proper spray coverage and drainage for upper-rack items so dishes come out cleaner
• Stops rubbing or scratching caused by damaged rack tines or supports
• Ensures proper alignment with the rack track and rollers for smooth in-and-out movement

• One upper rack

• Disconnect power and water to the dishwasher before starting work
• Remove lower rack and follow OEM instructions to unclip or slide out the damaged upper rack and install the replacement
• Check and transfer any rollers, end caps or tine inserts only if the OEM instructions show they are reusable; only items explicitly listed will ship
• Use care around sharp edges and test rack travel before running a full cycle

Left-hand door trim that restores the finished edge and appearance of the refrigerator door. Replaces cracked, dented, or missing trim to improve the door's cosmetic look and help maintain a proper seal area. What it does:

• Replaces the left-hand exterior door trim piece to restore the door's finished appearance and cover exposed edges.
• Helps protect the door edge from chips, scratches, and impact damage that cause visible wear.
• Addresses symptoms like cracked, warped, loose, or missing trim that create rough edges or an unfinished look.

• May require basic hand tools and removal of adjacent trim, gasket, or fasteners—follow the OEM service instructions for your model.
• If repair work exposes wiring, switches, or controls, disconnect power before starting.
• Handle trim edges and clips carefully to avoid damage; keep original fasteners and clips for reuse when possible.

This shelf cup is a replacement door bin retainer that secures a refrigerator door shelf in place, helping keep bottles and containers stable and preventing the shelf from shifting or falling during normal use. What it does:

• Supports and locks the front edge of a refrigerator door shelf or bin
• Prevents the shelf/bin from slipping forward when door is opened or items are removed
• Restores proper alignment and stable storage for bottles, jars, and small containers
• Compatible with common door shelf assemblies that use molded cup retainers

• Snap-in replacement; remove the old cup by prying gently and press new cup into place until fully seated
• Inspect surrounding mounting points and shelf for damage before installation
• Use non-marring tools and avoid excessive force to prevent cracking nearby trim
• Disconnect power only to remove interior shelves or to access electrical components