Gdsc3kcyc Parts

The Main Control Board is an OEM part for GE refrigerators. It serves as the central hub for managing and coordinating the various functions of the refrigerator, including temperature regulation, defrost cycles, and the operation of fans and compressors.

Over time, the main control board can fail due to electrical surges, wear and tear, or manufacturing defects. A malfunctioning control board can disrupt the refrigerator’s ability to maintain proper temperature and operate efficiently.

Symptoms of a bad main control board include:

• The refrigerator not cooling properly
• Erratic temperature fluctuations
• The refrigerator not running or turning off unexpectedly
• Unresponsive controls or display panel
• Unusual noises or clicks from the control board area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This access cover closes a service opening on the refrigerator cabinet, protecting internal components and restoring a secure, finished fit. Replacing a cracked or missing cover helps keep debris out and supports proper operation and airflow paths.

• Covers the machine/service compartment to shield wiring, fan, and other components from contact and debris
• Helps maintain designed airflow through the compartment when properly installed
• Reduces vibration and rattling when the cover is secured
• Replace if the cover is missing, cracked, warped, or no longer fastens securely

• Disconnect power before servicing
• Remove any retaining screws/clips and note the cover's orientation and vent/slot alignment
• Transfer any original grommets or insulation to the new cover if present
• Reinstall with existing hardware; do not overtighten; ensure openings/vents remain unobstructed

This self-adhesive foam strip provides a flexible seal and buffer for appliance gaps, helping reduce drafts, rattling, and moisture intrusion. Designed for easy stick-on replacement where foam padding or sealing is needed. What it does

• Seals small gaps between components to help reduce air leaks and temperature loss
• Cushions panels and doors to minimize noise and vibration
• Helps block moisture and dust from entering sensitive areas
• Self-adhesive backing allows for quick placement without extra glue

• One self-adhesive foam strip

• Surface must be clean and dry; wipe with isopropyl alcohol for best adhesion
• Measure and trim the foam strip to fit—use scissors or a utility knife
• Press firmly along the length to ensure full contact; allow adhesive to set before closing doors or panels
• For safety, disconnect power to the appliance before working in internal areas

This cam closure secures the freezer door hinge, helping the door latch properly and maintain a tight seal for consistent cooling. It replaces a worn or broken left-side closure to restore reliable door movement. What it does:

• Acts as the left-side hinge cam that guides and locks the freezer door into position
• Restores proper door alignment and sealing when the closure is worn, cracked, or loose
• Reduces door sag and helps prevent cold air loss and cycling issues
• Works with the freezer hinge assembly to ensure smooth opening and closing

• One left-side cam closure

• Verify left/right orientation before installation; part is specific to the left-side hinge
• Disconnect power to the appliance and remove food from the door area for safe access
• Use basic hand tools; support the door while replacing the cam to avoid damage or injury

This is a quality door assembly designed to be used with many refrigerators. On refrigerators with upper and lower doors, this assembly is the top section. The main purpose of the door assembly is to keep in the cold so the perishable items in the appliance stay at an appropriate temperature. The door assembly has a handle on the outside so users can easily get into the refrigerator to store or remove food and beverage items.In most cases, the door assembly on the refrigerator is very durable. However, time or wear and tear can lead to damage. If the door is experiencing issues, it should be replaced. Make sure the refrigerator is unplugged and a basic tool set is available. The hinges need to be unthreaded and an extra person may be needed to support the door as it is being removed. The wire harness will need to be removed after noting where it attaches. Replace with the new component before using the appliance.This door assembly is made for use with refrigerators manufactured by General Electric and Hotpoint. It's sourced directly from the manufacturer and sold on an individual basis. This is a genuine OEM replacement part that can be used to replace a broken component.

This electronic temperature control board regulates refrigerator cooling by reading sensors and commanding fans, compressor and defrost cycles to maintain set temperatures. Replaces a failed control board to restore proper temperature management. What it does:

• Receives temperature sensor signals and sends control commands to refrigeration components
• Helps stop irregular cooling, continuous run, or erratic temperature changes when the board has failed
• Works with defrost and fan systems to coordinate normal cooling and defrost cycles
• Restores electronic control when original board is unresponsive or damaged

• Disconnect power to the appliance before starting any repair
• Handle the board by its edges and avoid static discharge; use proper ESD precautions if available

This Hinge and Pin Stop Assembly secures a refrigerator door hinge pin and helps the door stay aligned for smooth opening and closing. It restores proper door movement and reduces sagging or uneven gaps. What it does:

• Replaces a worn or damaged hinge pin stop that can allow door sag or misalignment
• Keeps the hinge pin seated to prevent excessive rotation or catching during operation
• Reduces noise or sticking caused by a loose or broken hinge stop
• Helps the door form a proper seal by maintaining correct hinge position

• One hinge and pin stop assembly

• Unplug the appliance or disconnect power before beginning work
• Support the door before removing hinge fasteners to prevent dropping or damage
• Use basic hand tools; fasteners are tightened securely after installation
• Consider replacing matching hinge parts for optimal alignment

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges