Gdt42easj1ww Parts

The Door Harness Assembly is an OEM replacement part for GE dishwashers. It is an integral wiring component that connects modules on the dishwasher door to the main control board. These include interactive elements like the latch, temperature probe, and door switch.

Causes of failure can include cracked insulation, loose or severed connections, and pinched/chafed wires from repeated bending.

Symptoms of a bad door harness include:

• The dishwasher not starting or completing cycles
• Error codes related to door issues
• Sensors failing to register open/closed positions
• Lights/functions not activating as doors open

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Spring is an OEM part for GE dishwashers. This component is designed to provide the necessary tension to the dishwasher door, allowing it to open and close smoothly while ensuring it stays securely in place when shut.

Causes of a bad door spring can include wear and tear from regular use, overstretching due to excessive force, or corrosion from exposure to moisture over time. A compromised door spring can lead to issues with the door's balance and functionality.

Symptoms of a bad door spring include:

• Difficulty in opening or closing the dishwasher door
• The door not staying securely closed or dropping open suddenly
• Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Panel Assembly is an OEM replacement part for GE dishwashers. It houses the buttons and controls that users interact with to select and initiate different wash cycles and options. This assembly is integral for the user interface, ensuring that selections are communicated to the dishwasher's internal systems for execution.

Symptoms of a bad Control Panel Assembly include:

• Unresponsive buttons or controls
• The dishwasher not starting or pausing mid-cycle
• Error codes or lights indicating control or communication issues
• Inconsistent or incorrect execution of selected wash cycles

Causes for a malfunctioning Control Panel Assembly can include electrical issues, wear and tear from regular use, or damage due to cleaning or spills.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwashers.

The Water Valve is an OEM part for GE dishwashers. It controls the flow of water into the dishwasher during the wash and rinse cycles.

You should replace the water valve if it becomes defective or worn out. Over time, mineral deposits can build up, or the internal components can fail, leading to improper water flow. This can affect the dishwasher's performance and water efficiency.

Symptoms of a bad water valve include:

• The dishwasher not filling with water
• Low water pressure during the cycle
• Leaking water from the valve area
• Dishes remaining dirty due to insufficient water

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Hinge Pulley is an OEM part for GE dishwashers. This part works with the door springs and cables to provide smooth and balanced movement. This pulley ensures that the door operates efficiently, making it easy to load and unload dishes.

Causes of a bad door hinge pulley can include wear and tear from regular use, accumulation of debris or grease, or damage from accidental impacts.  

Symptoms of a bad door hinge pulley include:

• The dishwasher door not staying open or closed properly
• Difficulty in opening or closing the door
• Unusual noises during door operation, such as squeaking or grinding
• The door feeling loose or unbalanced

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dishwasher door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door action, prevents sudden slamming, and reduces stress on the hinges and link components.

• Provides the tension that counterbalances the door's weight during opening and closing
• Helps prevent the door from dropping quickly or feeling unusually heavy
• Supports smooth, even movement within the door hinge/counterbalance system
• Common signs of failure: door falls open, won't stay partially open, or binds/squeaks while moving

• Disconnect power and shut off water before servicing; wear gloves and eye protection
• Remove the toe-kick to access the spring and hinge area
• Support the door; carefully relieve spring tension and transfer the spring to the same anchor points as the original
• Test door balance and motion before reinstalling the toe panel

The Console Cover and Graphic Asm is an OEM replacement part for GE dishwashers. It covers and protects the control panel and touchpad, providing an interface for users to operate cycles. 

Causes of damage may arise from exposure to moisture, heat cycling in the door, or general wear and tear.

Symptoms of a bad console cover include:

• Cracking or clouding of the plastic over the control interface
• Missing labels or graphics on the interface surface
• Loose or improperly fitting attachment to the door frame
• Gaps or openings that compromise the water-tight seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This diverter assembly kit controls the dishwasher's wash-water routing. It switches flow between spray arms for targeted cleaning. Replacing a failed diverter restores proper water distribution and helps recover normal wash performance.

• Directs wash water between lower and upper/middle spray arms as the cycle advances
• Works with the control to provide zone/alternating spray for efficient cleaning
• Failure can cause poor cleaning on one rack or water spraying from only one arm
• May produce repeated clicking/grinding from the sump area or extended cycles while indexing

• Disconnect power and shut off water supply before servicing; expect some residual water
• Access the diverter at the sump/pump area; follow your model's service procedures
• Ensure seals/O-rings are properly seated and parts are aligned before tightening
• Run a short test cycle to check for leaks and confirm both racks receive spray

This main wash pump kit restores strong water circulation to drive the spray arms for thorough cleaning. Replace if the existing pump is weak, noisy, or leaking to recover proper wash performance.

• Circulates wash water through the spray arms during wash and rinse cycles
• Maintains proper water flow for consistent cleaning results
• Common failure signs: poor cleaning or no spray action, loud humming or grinding from the base, or leaks around the pump area

• Disconnect power and turn off the water supply before servicing
• Access the pump from the bottom; remove the toe-kick and pull the unit as needed
• Expect residual water—use a towel or pan; note hose and wire positions
• Seat seals fully and secure clamps; run a short test cycle to check for leaks

This right-hand roller cover is the small retainer that locks a dishwasher rack roller onto its mount. Replacing a cracked or missing cover restores smooth, stable rack movement and helps prevent the roller from working loose during use.

• Secures the right-hand rack roller to its axle/mount
• Helps the rack slide smoothly and stay level
• Replaces covers that are cracked, worn, or missing
• Symptoms include: rack binding on one side, tilting/dropping, rattling, or a roller that pops off

• Disconnect power and shut off water before servicing
• Pull the rack forward and remove if needed to access the roller area
• Release the old cover's locking tabs; align and snap the new cover into place on the right-hand side
• Ensure the rack rolls smoothly and sits level; right- and left-hand pieces are not interchangeable

This dishwasher hose clamp secures a hose to its fitting to maintain a tight, watertight connection. Replacing a fatigued clamp helps stop leaks and keeps water moving reliably during fill and drain cycles. What it does:

• Secures hose-to-fitting connections at the pump, sump, or inlet/outlet
• Maintains a tight seal to help prevent drips and leaks
• Replaces a clamp that has lost tension, corroded, or broken

• 1 hose clamp

• Disconnect power and turn off the water supply before servicing
• Access point varies by model; remove the toe-kick and/or pull the unit forward as needed; place a towel to catch residual water
• Relieve/loosen the old clamp, fully seat the hose on the fitting, position the clamp behind the fitting barb, and secure
• Use the appropriate tool for your clamp style and run a short test to check for leaks

Specs: B-16 HXW 1/2 SS

The Valve Check is an OEM replacement part for GE dishwashers. It is responsible for controlling the water flow within the dishwasher, preventing the backflow of water into the dishwasher's drain system. It makes sure that water flows in the correct direction during the dishwashing cycle. It helps maintain the integrity of the drain system and prevents any potential contamination or damage.

Symptoms of a faulty valve check include:

• Insufficient water filling or draining
• Water leaks around the valve area
• Inconsistent or erratic water flow

A bad valve check can occur due to wear and tear over time, clogging from debris or mineral deposits, or physical damage. If you notice issues such as improper water filling, inadequate water draining, or leaks around the valve, it may be time to replace the old or damaged valve check with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Dishwasher Configured Service Machine Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit, managing and regulating various operations and functions of the dishwasher.

Symptoms of a failing dishwasher service machine control board include:

• The dishwasher not powering on or responding to any input commands
• Incomplete or interrupted wash cycles
• Indicator lights or displays malfunctioning or displaying error codes
• Specific components like the water inlet valve or drain pump not functioning properly

Causes of a bad service machine control board can include electrical malfunctions, power surges or electrical spikes, physical damage from impact or moisture intrusion, or simply wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

This 10-32 x 9/16 machine screw secures dishwasher components and panels. Replacing a missing or stripped fastener restores a tight fit, reduces vibration/rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, or internal assemblies using a 10-32 machine thread
• Replaces lost, corroded, or stripped screws
• Can help resolve looseness or rattling from a loose mounting point
• Correct 9/16-inch length helps maintain proper spacing and alignment

• Disconnect power at the breaker before servicing
• Use the appropriate driver for the screw head; start threads by hand to avoid cross-threading
• Tighten snugly but do not overtighten to prevent stripping threads or damaging mating parts
• Compare to the original fastener to matching thread and length

• Thread size: 10-32
• Length: 9/16 inch

The Hub is an OEM replacement part for GE dishwashers. It is the central mechanism which attaches to the tub and facilitates rotation of the upper spray arm above dishes. 

Causes of a bad hub include wear from years of repeated rotation, accumulation of hard water scale deposits inside moving parts, or accidental impact damage. This reduces proper function over time.

Symptoms of a bad hub include:

• Loud clunking or grinding noises from the center mechanism
• Reduced cleaning performance on upper racks or portions of dishes  
• Dishes showing water spots or soil in sections not adequately rinsed
• Inability to attach or move the upper spray arm assembly smoothly

This OEM GE hub replacement is also compatible with Crosley, and KitchenAid models.