Gdt655sgjww Parts

This 10-32 x 1/4-inch zinc-plated screw secures internal panels and hardware in select dishwashers. Replace a missing, stripped, or corroded fastener to restore a tight fit and help prevent vibration or loosening during operation.

• Fastens brackets, panels, or components that use a 10-32 machine thread
• Replaces hardware that is missing, stripped, or rusted
• Helps reduce rattling or vibration from loose assemblies
• Supports proper component alignment for reliable operation

• Disconnect power and water supply before servicing the appliance
• Remove the old fastener and verify thread size and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace damaged clips, nuts, or inserts that won't hold a 10-32 screw securely

This fixed dishrack bracket secures one end of a rack component (such as a fold-down tine row), keeping it anchored during wash cycles. Replace a cracked or missing bracket to restore stable support and reliable rack function.

• Anchors a rack component to the dishrack in a fixed position
• Helps keep dividers/tines aligned so dishes stay upright
• Replaces a broken, worn, or missing bracket
• Symptoms may include loose or collapsing tines, dishes tipping, or visible bracket damage

• Unload and extend the rack; remove the rack if needed for access
• Release the locking tabs/clips and remove the damaged bracket
• Align the new bracket and snap/slide it fully into place until it locks
• Verify a secure fit and smooth rack movement; wear gloves to protect hands
• Some racks use both fixed and adjustable brackets—confirm the side you need before ordering

This control box top is the plastic cover that protects the appliance's control board and user controls while keeping the front of the console finished and safe. It helps prevent dust, moisture, and accidental contact with internal electronics. What it does

• Covers and protects the control board and internal wiring behind the console.
• Provides the mounting surface and openings for buttons, knobs or touch interfaces.
• Prevents dirt, lint, and moisture from reaching sensitive electronics.
• Restores a secure, finished appearance to a damaged or cracked console area.

• Always disconnect power to the appliance before beginning work to avoid electrical shock.
• Remove any bezel, screws or clips securing the old top and transfer any required mounting hardware or trim pieces.
• Handle the control board and connectors with care; avoid touching circuit components or bending contact pins.

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

The Upper Rack Bracket Assembly is an OEM replacement part for GE dishwashers. It is located inside the dishwasher tub and functions to securely mount the upper dish rack. It allows for adjustable height positioning and prevents rack movement during washing.

Causes of a bad upper rack bracket assembly can include cracks or breaks in the mounting points, stripped screw holes allowing rack sway, or deformities preventing proper seating.

Symptoms of a bad upper rack bracket assembly include: 

• Loosening or detaching of the upper rack during the cycle  
• Restricted rack adjustment or inability to set desired height
• Noise or vibration from an unsecured rack vibrating against the tub

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Filter Coarse is an OEM component specifically designed for GE dishwashers. It refers to the screen installed before the wash pump that traps soil and food particles. Subject to continuous wear from both water circulation and collected debris, the filter mesh can worsen over time.  

Causes of a bad coarse filter include:

• Clogged perforations blocking drainage and reducing water pressure  
• Loose mounting clips releasing trapped soils back into wash water instead of tube drain 
• Stretched or warped mesh no longer shutting tight to form a watertight seal

Symptoms of a failed coarse filter include:

• Soil tracked throughout the dishwasher unseen 
• Excessive residue left on dishes after washing and rinsing cycles
• Puddling inside the tub or continuing sound of draining after the cycle ends

This GE replacement part is also compatible with some Hotpoint and RCA models.

This wiring harness assembly connects and routes power and control signals for the appliance's AC components, restoring reliable electrical connections and proper operation when the original harness is damaged or worn. What it does:

• Provides the factory wiring path for AC-related components so they receive correct power and signals
• Replaces frayed, damaged, or burnt wires that can cause intermittent operation or failures
• Helps eliminate symptoms such as components not powering on, intermittent operation, or electrical arcing at connections
• Ensures connector fit and terminal alignment for a secure electrical connection

• Disconnect power before beginning any repair to avoid electrical shock
• Note or photograph wire routing and connector positions before removal for correct reinstallation
• Secure harness with existing clips or fasteners to prevent chafing and strain on terminals

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.

This SCR 8-18 silicon-controlled rectifier replaces the control semiconductor that switches and regulates power to heating or motor circuits in compatible appliances, restoring proper power delivery and control. It's a direct-fit electrical replacement part. What it does

• Acts as a switching device on control boards to allow or block current flow when signaled.
• Regulates power delivered to heating elements or motor circuits to enable proper operation.
• Commonly linked to symptoms like no heat or intermittent heating, motors that won't start, or erratic control-board behavior.
• Helps restore reliable on/off control when a failed SCR is causing open or shorted conditions.

• One SCR 8-18 silicon-controlled rectifier (WD02X10160).

• Always disconnect power before servicing the appliance to avoid shock.
• Handle the part carefully; avoid touching leads and use anti-static precautions if available.
• Inspect surrounding connectors and wiring for damage; replace any corroded terminals.

A fixed mounting bracket that secures and stabilizes a component or panel in place, helping prevent movement and vibration for reliable appliance operation. Simple, durable replacement for worn or damaged brackets. What it does:

• Holds a panel, trim, or assembly securely to the appliance frame
• Keeps parts aligned to prevent rubbing, rattling, or misfit
• Restores proper support when an original bracket is bent, cracked, or broken
• Helps reduce noise caused by loose or unstable components

• Disconnect power (and water if applicable) before starting work
• Use the factory fasteners or equivalent-size screws to secure the bracket
• Inspect mating surfaces and hardware for damage; replace any stripped screws

This vent conduit assembly routes exhaust from the dryer to the home vent, restoring proper airflow and helping the appliance vent safely. It replaces a damaged, crushed, or disconnected dryer vent channel to improve drying performance and reduce lint buildup. What it does:

• Channels dryer exhaust from the appliance to the wall vent
• Prevents restricted airflow caused by crushed or separated vent tubing
• Helps reduce long dry times and overheating symptoms
• Lowers risk of lint buildup and related odors near the dryer

• Disconnect power (and gas supply for gas dryers) before beginning service
• Verify correct alignment and secure with appropriate clamps or fasteners
• Inspect adjacent venting and clean lint from vent path while replacing

This control box bottom is the lower housing piece that secures and protects the appliance control board and related components. It restores a stable mounting surface and helps keep electronics shielded from vibration and debris. What it does:

• Provides the lower half of the control box housing to support and protect the control board
• Keeps wiring and connectors routed and held in place to prevent strain
• Replaces cracked, broken or warped housing that can expose electronics
• Helps stop rattling or movement of the control assembly that can cause intermittent controls

• Control box bottom

• Power off and unplug the appliance before starting any repair
• Handle the control board and connectors carefully to avoid electrostatic or mechanical damage
• This part typically installs with screws or clips; retain fasteners and note their locations during disassembly
• Inspect and address the electronics before reassembly

A silicon-controlled rectifier (SCR) used on appliance control boards to regulate power to motors, igniters or other loads. Replacing a faulty SCR can restore proper power switching and steady operation of the driven component. What it does:

• Acts as a power-switching semiconductor in appliance electronic control circuits to allow current flow only when triggered.
• Enables controlled delivery of voltage/current to motors, igniters and similar loads on the control board.
• A failing SCR can cause symptoms such as no power to a motor or igniter, intermittent operation, or complete failure of the driven component.
• Match the SCR package and electrical ratings to the control board before replacing.

• Disconnect all power to the appliance before accessing control electronics to avoid shock or damage.
• Take electrostatic-discharge (ESD) precautions; handle the SCR by its body and avoid touching leads.
• Package orientation and electrical ratings on the control board and wiring before installation.

This is a stainless steel hex washer-head screw used to fasten and secure components. Its integrated washer head provides a broad bearing surface for a tight, durable hold in appliance assemblies.

• Secures panels, brackets, and hardware to prevent looseness and vibration
• Restores proper fastening when originals are stripped, missing, or corroded
• Stainless construction helps resist rust in moisture-prone areas
• Common symptoms of a needed replacement include rattling, loose panels, or missing hardware

• Disconnect power and, if applicable, shut off water before servicing
• Use the correct nut driver or socket for the hex head to avoid stripping
• Replace any damaged or missing fasteners in matched pairs or sets for even clamping
• Do not overtighten; snug to manufacturer torque guidance when available

This tub trim replaces the decorative and protective ring around the appliance tub opening to restore a finished look and help keep the door seal aligned. It's a direct-fit cosmetic trim for specified GE tubs. What it does

• Covers the gap between the tub and door opening for a clean finished appearance
• Protects the tub edge and door seal from wear and fabric snags
• Helps maintain a snug seal by holding gasket edges in place
• Fixes issues like visible damage, cracks, or missing trim that affect appearance

• One tub trim (black/stainless) as shown

• Disconnect power and, if applicable, water supply before starting repairs
• Installation typically requires removing the door or front panel and snapping or screwing the trim into place — have basic hand tools ready
• Wear gloves to protect hands from sharp edges during removal/installation

The User Interface Housing is an OEM replacement part for GE dishwashers. Located at the front of the console, it houses the control panel responsible for cycle/option navigation.

The housing protects sensitive electronic components from water damage and physical impact. Its sturdy construction allows for responsive touch inputs without flex or play in the assembly. 

Symptoms of a bad user interface housing include:

• Warping or cracks exposing circuitry to damage
• Faulty sealing allowing moisture penetration
• Difficulty registering button presses from structural defects
• Ill-fitting installation negatively impacting usability

Causes can be repetitive openings allowing entry of dirt/moisture into critical areas and use over the years breaking down seals and weakening materials.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.