Gdt655sgjww Parts

This block foam door is an insulated panel that fits inside the appliance door to help reduce heat transfer and maintain consistent internal temperatures. It restores door insulation for more efficient cooling and temperature stability. What it does:

• Provides thermal insulation inside the door to reduce heat gain or loss
• Helps prevent frost buildup and cold spots by improving temperature consistency
• Supports efficient compressor cycling and can reduce energy waste when functioning properly
• Common symptom: uneven temperatures, visible condensation or frost on the door, or reduced cooling performance

• One block foam door

• Disconnect power before servicing and follow the appliance manufacturer's disassembly instructions
• May require removing the inner door liner and fasteners to access and replace the foam; keep hardware for reassembly
• Handle carefully to avoid damaging the foam or door liner; use appropriate hand protection

This bracket handle is the replacement mounting bracket that secures a refrigerator or freezer door handle, restoring proper handle alignment and a secure grip. It helps keep the door handle firmly attached and functioning. What it does:

• Secures the door handle to the appliance door so the handle stays mounted and aligned
• Restores a loose, wobbly, or detached handle for reliable opening and closing
• Prevents further wear on handle fasteners by providing the proper mounting support
• Matches OEM fit and function for straightforward replacement

• One replacement bracket handle

• Basic hand tools typically required; handle hardware may need removal first
• Follow OEM instructions and use correct fasteners; replace any damaged screws or anchors
• Disconnect power to the appliance (or keep door open/unloaded) and work safely to avoid pinching or dropping the door

This transition piece assembly connects the dryer cabinet to the exhaust duct, guiding hot, moist air out of the dryer for proper venting and improved drying performance. It replaces a damaged or worn transition fitting. What it does

• Directs exhaust air from the dryer outlet into the venting system to help prevent backflow and poor airflow
• Helps reduce lint buildup at the cabinet outlet when intact and properly seated
• Restores proper vent path when a cracked, bent, or missing transition causes poor drying or longer cycle times
• Works with standard dryer venting components and clamps to form a secure exhaust connection

• One transition piece assembly

• Disconnect electric power (or shut off gas and unplug for gas dryers) before starting; follow appliance safety procedures
• Inspect the dryer outlet, vent hose, clamps, and adjacent seals; replace any damaged components for a proper seal
• Slide the transition into place and secure with appropriate clamps or screws; ensure the exhaust path is not kinked or crushed
• Check for unrestricted airflow after installation and clean any lint from the vent system

This latch cam engages the door latch mechanism so the appliance door closes and stays secure during cycles. A worn or broken cam can prevent the door from latching or cause the door to feel loose. What it does

• Rotates with the latch to lock the door securely during operation
• Ensures the latch striker catches and holds the door closed
• Common symptom: door won't stay latched or appliance won't start
• Common symptom: door feels loose, noisy, or intermittently opens during cycles

• One latch cam

• Disconnect power before starting any repair to avoid shock or injury
• Inspect surrounding latch components and replace any visibly damaged parts
• Use basic hand tools; keep track of small fasteners and alignment during reassembly
• Test door operation several times after installation to ensure secure engagement

Replacement control box top that restores the protective cover for the appliance control housing, keeping wiring and electronics enclosed for a cleaner appearance and safer operation. What it does:

• Covers and protects the control housing and internal wiring from dust, spills, and accidental contact
• Helps secure control components in place and maintain the appliance's factory appearance
• Commonly replaced when the original cover is cracked, broken, missing, or shows visible damage
• Can prevent loose wiring from catching or being accidentally disturbed

• One control box top

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Remove any screws or retainers securing the existing cover and lift off the old top; keep fasteners if reinstalling
• Align the replacement top and secure with the original fasteners; ensure wiring is routed and seated before closing

This replacement lower dishrack restores smooth rolling and secure loading on the bottom level of your dishwasher, helping plates, bowls, and pots stay in place for consistent spray coverage and reliable cleaning results. What it does

• Organizes and supports dishes, cookware, and utensils on the lower level during wash and dry cycles
• Rolls in and out on the tub rails for easy loading and unloading
• Positions items for effective spray coverage and drainage
• Replace if tines are broken, coating is peeling/rusting, the rack derails or won't roll smoothly, or items tip over

• One lower dishrack

• Turn off power to the dishwasher before servicing
• Pull the old lower rack straight out; release/remove any rack stops if present
• Transfer any removable accessories from the old rack (such as utensil basket or clips), if needed
• Slide the new rack onto the rails and verify smooth operation

This high loop drain hose creates the required elevated drain loop to help prevent dishwasher backflow and ensure proper drainage. It replaces a worn or damaged drain loop and restores correct drain routing for reliable performance. What it does:

• Forms the high loop in the dishwasher drain line to reduce risk of sink water siphoning back into the appliance
• Directs wastewater from the dishwasher into the household drain properly
• Helps avoid intermittent draining issues caused by a collapsed or split drain loop
• Fits into existing drain connections—used where an elevated drain loop is required

• Designed for in-line replacement; route the hose to create a high loop secured under the countertop or cabinet as shown in the appliance installer instructions
• Turn off power and water supply to the appliance before performing service
• Inspect clamps and fittings and replace if corroded; ensure all connections are snug but not over-tightened

The Turbidity Sensor is an OEM part for GE dishwashers. It is a water quality monitor that detects small food particles in the rinse water during dishwashing cycles. The sensor plays an important quality control role by ensuring water has achieved the necessary clarity before terminating the rinse phase.

Symptoms of a bad turbidity sensor include:

• Incomplete or unsatisfactory rinsing results
• Cycles not advancing properly beyond the rinse stage
• Error codes related to turbidity detection

Causes can be mineral deposits interfering with the sensor's ability to transmit light through the water, or failure of the electronic components over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

TRANSITION PIECE ASM

This upper rack is a direct-fit replacement that restores the top-level dish storage area and allows safe, secure loading of cups, glasses and small bowls. It brings back proper rack support and organization for everyday dishwasher use. What it does:

• Supports cups, glasses and small dishes on the top rack to improve loading capacity and wash coverage
• Restores smooth sliding and proper alignment of the upper rack assembly
• Helps prevent items from tipping or blocking spray arms when the rack is installed correctly
• Addresses common symptoms like sagging, broken rack supports or bent rails that interfere with rack movement

• 1 upper rack

• Disconnect power and water to the dishwasher before servicing
• Remove the old rack by sliding it out and detaching any end caps or stops; install the replacement by aligning and sliding onto the existing track/rollers
• Keep all original rollers, end caps and supports; replace damaged hardware as needed
• After installation, run an empty quick wash to ensure proper fit and smooth operation

The User Interface Control Board Cover is an OEM part for GE dishwashers. As a component responsible for holding the UI board.

Symptoms of a bad Silicone Light Pipe include:

• Dim or unlit indicator lights providing unclear status 
• Cracks or broken areas allowing water intrusion into electrical areas
• Detached or missing sections creating an incomplete appearance

Causes of a bad light pipe can include cracks, tears, or discoloration impairing light transmission over multiple years of use. Repeated door openings and closings subject it to mechanical stress.

This OEM light pipe part is also compatible with Hotpoint, RCA and select Kenmore models.

The Console Cover and Graphics Assembly is an OEM part for GE dishwashers. It covers the control panel and touchscreen, allowing for easy operation and monitoring of cycles. Over years of use, the console can become brittle or discolored from chemicals and temperature changes during cleaning. The screen may develop dead spots or lines interfering with input.  

Causes of a bad part include repeated heating and cooling causing materials to degrade as well as splashes of harsh detergents.

Symptoms of a bad part include:

• Cracked, faded, or peeling console material
• Unresponsive or glitchy touchscreen  
• Loose or misaligned fit that allows water intrusion

This GE replacement is also compatible with Hotpoint, RCA, and select Kenmore models.

The Console Cover Graphics Assembly is an OEM replacement part for GE dishwashers. It is responsible for covering and protecting the control panel and touchpad of the dishwasher.

Symptoms of a faulty console cover graphics assembly include:

• Cracked or damaged cover
• Faded or worn-out graphics
• Inability to read or operate the touchpad

A bad console cover graphics assembly can occur due to wear and tear over time, physical damage, or fading of the graphics. If you notice cracks, discoloration, or missing pieces on the console cover, it may be time to replace it.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Fill Funnel Cap seals the dishwasher's water inlet funnel at the rear of the tub. It creates a tight docking point for the upper rack feed tube, helping prevent leaks and maintain spray pressure for effective upper-rack cleaning.

• Seals the water inlet funnel and helps guide water into the upper wash system
• Helps maintain spray pressure to the upper rack for better cleaning results
• Reduces splashing and potential leaks at the funnel connection
• Symptoms include a cracked/missing cap, water dripping near the rear funnel, or weak cleaning on the upper rack

• Disconnect power and shut off the water supply before servicing
• Pull the upper rack forward to access the rear funnel area
• Release and remove the old cap; clean the sealing surface
• Align and snap/secure the new cap; verify the rack feed tube docks smoothly

This replacement hose feeds the Bottle Jets/Bottle Blaster feature on compatible dishwashers. It carries wash water to the jet manifold so tall, narrow items receive targeted spray and helps prevent leaks from a cracked or brittle line. What it does:

• Routes wash water to the Bottle Jets/Bottle Blaster manifold for targeted cleaning
• Maintains a sealed path so jets can spray inside bottles and other narrow containers
• Common symptoms: leaks at the hose or connections, weak/no bottle-jet spray, visible cracks, kinks, or a loose hose
• Helps restore bottle-jet performance when the original hose is damaged

• 1 hose

• Disconnect power at the breaker and shut off the water supply before servicing
• Pull the dishwasher forward and/or remove rack components as needed to access both hose ends
• Transfer/secure clamps, fully seat the hose on each barb, and route it to avoid kinks or rubbing
• Reassemble and run a short test cycle while checking all connections for leaks