Gdt720sgfbb Parts

This coated upper FDT assembly is a direct replacement for the appliance's upper FDT structure, restoring worn or damaged upper components for reliable operation. It helps maintain alignment and reduces wear-related issues. What it does:

• Replaces the appliance's upper FDT assembly to restore proper fit and support.
• Provides the coated surface that helps protect mating parts from wear and abrasion.
• Helps correct symptoms such as rubbing or scraping noises, misalignment of the upper housing, and visible wear or damage.
• Restores the intended clearance and contact surfaces for smoother operation.

• One coated upper FDT assembly.

• Disconnect power to the appliance before starting any repair.
• Handle the coated surfaces with care to avoid scratching or damaging the finish.
• Retain and reuse existing mounting hardware unless replacement hardware is explicitly required.

This control board clip secures the dishwasher's electronic control board to its mounting location, keeping it properly seated during operation. Replacing a damaged or missing clip helps prevent vibration, movement, and wire-connector strain.

• Holds the electronic control board firmly in its designated mount or housing
• Helps prevent board movement, rattling, and connector stress from vibration
• Replace if the clip is cracked, deformed, or missing
• Symptoms include a loose control assembly, rattling noises, or a board that won't stay seated

• Disconnect power at the breaker before servicing
• Access the control area; support the board when removing/installing the clip
• Handle the control board by the edges and observe ESD precautions
• Ensure the new clip is fully seated and the board is secure before reassembly

This top attachment strip secures the appliance's top panel and provides the mounting point for the door strike, restoring a stable, properly aligned front. It prevents panel movement and reduces rattles for a snug fit and reliable door engagement. What it does:

• Secures the top/front panel to the cabinet to maintain alignment and fit
• Serves as the mounting point for the door strike or latch components
• Helps eliminate rattling, vibration, and gaps at the top of the door area
• Restores reliable door engagement and prevents the strike from shifting

• Disconnect power to the appliance before beginning any repair
• Remove the top panel or access screws to reach the attachment strip; a screwdriver set is typically required
• Handle mounting tabs and edges carefully to avoid bending or damage
• Verify alignment of the door strike and test door closure after installation

This drain pump hanger secures the washer's drain pump to the outer tub, keeping the pump and hoses aligned so the pump can remove water reliably. Use it to replace a cracked or broken support that lets the pump shift. What it does

• Holds the drain pump firmly in place and maintains proper pump alignment.
• Helps reduce pump vibration and noise from a loose or mispositioned pump.
• Prevents the pump from pulling on hoses or becoming dislodged during the spin/drain cycle.
• A worn or broken hanger can contribute to poor draining, intermittent drainage, or unusual pump noise.

• One drain pump hanger.

• Disconnect power to the washer before beginning any repair.
• Access typically via the washer's lower front or rear panel; follow for disassembly.
• Inspect and reuse mounting hardware and grommets if undamaged; replace if corroded or broken.

This control box bottom is the lower housing that protects and supports the appliance's control electronics, helping keep wiring and components secure from debris and moisture. Fits into the control assembly to restore proper enclosure and support. What it does:

• Provides a protective lower enclosure for the control board and wiring harness
• Helps keep dust, lint and moisture away from sensitive electronics
• Secures the control board and related connectors in their correct position
• Prevents rattling or movement that can cause loose connections or noise

• One control box bottom (base cover) as pictured

• Disconnect power before servicing to avoid shock or component damage
• Handle electronics carefully and avoid touching circuit contacts
• Installation typically requires basic hand tools and removal of the control housing

This leak pan is the factory replacement drip/overflow tray that catches and channels unwanted water away from the appliance to help prevent damage to floors and cabinetry. Fits where the original pan collected condensation or small leaks. What it does:

• Catches water from minor leaks, condensation, or defrost drain overflow
• Directs collected water to the appliance drain path or containment area
• Helps prevent water from reaching flooring and cabinetry
• Common symptom: water pooling under or around the appliance

• Disconnect power and water supply before beginning any service
• Access typically requires removing the appliance kickplate or lower access panel
• Inspect and clear associated drain lines and gaskets while replacing the pan

The Filter Adapter is an OEM component specifically designed for GE dishwashers. Located inside the dishwasher tub, it functions to strain out large food particles from water before it reaches the wash arms.  The adapter holds the removable wash/rinse filters in place during operation, functioning as an extension of the filtration system. 

Causes of a bad filter adapter can include cracks or breaks compromising its sealing surface, wear and tear deforming filter retention features over time, or buildup inhibiting functionality.

Symptoms of a bad filter adapter include:  

• Loose or falling out removable filters during washing  
• Bypassing of food particles around compromised seals
• Reduced lifespan of disposable filters placed in a faulty adapter
• Debris accumulation impacting spray arm performance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This bottle blaster assembly supplies targeted wash water to the dishwasher's Bottle Jets to clean tall, narrow items like baby and sports bottles. Replace a damaged or clogged assembly to restore focused spray and top-rack cleaning performance. What it does:

• Routes wash water to the bottle jet nozzles for concentrated cleaning inside bottles and narrow openings
• Helps improve cleaning on items positioned over the Bottle Jets
• Failure symptoms include no spray from the bottle jets, poor upper-rack cleaning, leaks near the jet area, or visible cracks/damage

• 1 bottle blaster assembly

• Disconnect power and shut off water to the dishwasher before servicing
• Access the bottle jet area; release retaining clips/fasteners and note hose routing and connection points
• Transfer any reusable clips or seals from the original assembly if needed
• Fully seat connections; run a short cycle to check for leaks and proper jet spray

This insulation toe kick is a replacement panel that fits the refrigerator base to help block drafts and protect internal components under the cabinet. It restores the factory barrier that supports temperature stability and efficient operation. What it does

• Replaces damaged or missing toe-kick insulation that lets cold air escape beneath the appliance
• Helps reduce drafts and minimize warm air intrusion into the refrigerator cavity
• Protects wiring and components located in the toe-kick area from dust and debris
• Can help prevent uneven cooling or frost buildup that results from compromised base insulation

• One insulation toe kick panel

• Disconnect power to the appliance before starting any service
• Remove the existing toe kick/board and fasteners, then position the replacement so mounting tabs align with factory slots
• Avoid compressing or tearing the insulation; maintain original fit for proper performance

This door handle assembly replaces a broken or worn handle to restore a secure grip and normal door operation. It's a direct-fit replacement designed to match the original part's fit and function. What it does

• Replaces a cracked, loose or broken door handle so the door opens and closes properly
• Provides a solid handhold for everyday use and prevents sharp edges from exposed damage
• Restores correct alignment and engagement with the door trim and latch area
• Helps eliminate rattling or wobble caused by a failing handle

• One complete door handle assembly

• Disconnect power to the appliance before starting any repair
• Remove exterior trim or access panels as required to reach mounting screws; retain hardware if in good condition
• Handle is secured with screws or clips—inspect fasteners and striker/latch for wear during install

This white door handle assembly replaces a broken, cracked or loose refrigerator door handle to restore a secure grip and clean appearance. Fits compatible GE refrigerators and installs in place of the original handle assembly. What it does:

• Provides a secure, ergonomic grip for opening and closing the refrigerator door
• Replaces broken, cracked or loose handles that affect door operation or appearance
• Restores proper handle alignment so the door opens smoothly
• Helps prevent further damage from using a compromised handle

• Remove food and any items from the door; support the door while working to avoid strain or damage
• Use common hand tools (screwdriver, socket) to remove mounting screws and transfer any trim or mounting hardware as needed
• Keep original screws and clips unless the new assembly explicitly includes replacements

This tub trim piece covers the washer tub edge to restore a finished appearance and help protect clothes from snagging. It replaces worn or damaged trim that can expose the drum edge. What it does:

• Covers and protects the exposed tub/drum rim to reduce fabric snags and wear
• Restores a finished look to the washer opening for improved aesthetics
• Helps maintain the seal interface between the door and tub perimeter
• Prevents dirt buildup in the exposed gap at the tub edge

• Disconnect power (and water if applicable) before beginning work
• Remove the door or front panel as needed per your model's service instructions
• Align the trim carefully and snap or fasten into place without forcing

This tub trim piece secures and finishes the washer tub opening, keeping the cabinet gap sealed and improving the door seal appearance. It replaces a worn or cracked tub trim to help reduce water spray and maintain a proper fit. What it does:

• Covers and seals the tub opening edge to help prevent water from escaping around the door
• Reestablishes a smooth mounting surface for the door boot/gasket and outer assembly
• Addresses visible damage like cracks, dents or missing trim that can catch laundry
• Helps reduce rubbing or chafing of the door seal caused by a damaged tub edge

• One tub trim piece

• Designed for repair-level replacement; remove power and disconnect water before starting
• Basic trim removal may require removing the door boot/gasket and outer front panel; follow your model's service instructions
• Inspect surrounding seal and fasteners; replace any damaged clips or screws

This tub trim ring restores the finished edge around the washer tub opening for a clean, secure fit and appearance. It replaces cracked or missing trim that can catch clothing or make the top look worn. What it does:

• Covers and protects the tub opening edge to prevent clothes from catching on the tub lip
• Restores the washer's finished appearance after damage or wear
• Helps maintain proper fit against the cabinet and lid area
• Reduces chances of visible gaps or rubbing during load agitation

• Turn off power to the appliance before starting any repair
• You may need to open or remove the washer top or access panel to reach and replace the trim
• Handle the trim carefully — edges can be sharp and clips can be brittle on older machines
• If clips or mounting hardware are broken, inspect and replace them as needed