Gdtp180ed0ww Parts

The Flat Chrome Badge is an OEM part for GE refrigerators. It is responsible for displaying the GE logo and model information on the front of the refrigerator. As an identifiable brand marker, the badge contributes to the overall appearance and style of the appliance.

Causes of a bad badge can include damage from impacts or bending, discoloration or tarnishing over time, or simple wear and tear that renders the badge appearance faded or illegible.

Symptoms of a bad badge include:

• A missing, loose, crooked or illegible badge
• Signs of denting, scratching or corrosion
• An outdated or inconsistent badge that doesn't match the model

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This 10-32 x 1/4-inch zinc-plated screw secures internal panels and hardware in select dishwashers. Replace a missing, stripped, or corroded fastener to restore a tight fit and help prevent vibration or loosening during operation.

• Fastens brackets, panels, or components that use a 10-32 machine thread
• Replaces hardware that is missing, stripped, or rusted
• Helps reduce rattling or vibration from loose assemblies
• Supports proper component alignment for reliable operation

• Disconnect power and water supply before servicing the appliance
• Remove the old fastener and verify thread size and length match before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace damaged clips, nuts, or inserts that won't hold a 10-32 screw securely

This flood float and switch assembly senses the dishwasher's water level and signals the control to stop filling at the proper point, helping prevent overfilling and leaks while restoring consistent, correct fill for reliable wash performance.

• Senses rising water level via a float and actuates the switch
• Signals the control to stop water flow when the set level is reached
• Failure symptoms include no fill, continuous filling/overfilling, intermittent filling, or continuous draining at startup
• Restores proper water-level protection and helps prevent leak damage

• Disconnect power and shut off water supply before servicing; wear cut-resistant gloves
• Access is typically from the lower front/toe-kick area; remove panels to reach the float/switch housing
• Move wire connections one at a time to the new assembly; ensure the float moves freely after installation
• Run a brief fill test and inspect for leaks before fully reassembling

This dishwasher fill funnel guides water flow into the appropriate channel, helping ensure proper distribution during wash cycles. Replacing a warped or damaged funnel can prevent leaks and restore consistent spray performance.

• Directs water into the dishwasher's internal water feed path
• Helps maintain correct water pressure for spray arms
• Common failure signs: leaking at the funnel area, poor spray performance, residue on dishes, or misalignment with the water feed tube
• Physical damage, warping, or a loose fit are typical replacement indicators

• Disconnect power and turn off water supply before servicing
• Access from inside the tub; remove any retaining screws or clips
• Inspect and reuse existing hardware/seals if still in good condition
• After installation, run a short cycle and check for leaks or misalignment

The Wash Pump Assembly is an OEM part for GE dishwashers. As the component responsible for circulating water through the wash system, the wash pump plays a vital role in cleaning dishes effectively. 

Symptoms of a bad wash pump include:

• Incomplete or insufficient cleaning even on high heat cycles  
• Lack of water pressure through the spray arms
• Uneven wetting or saturation of dishes
• Strange sounds or vibrations coming from the tub area

Causes of wash pump failure can be mineral buildup clogging internal parts, worn-out motor brushes creating inefficient operation, or damage from debris entering openings in the pump body.

This genuine GE part is compatible with select Hotpoint, RCA, and some Kenmore models also.

This fill funnel hose directs incoming water from the inlet assembly into the tub through the fill funnel. Replacing a worn or cracked hose helps stop leaks and restores a reliable, sealed fill path for consistent wash performance.

• Carries water from the inlet assembly through the fill funnel into the tub
• Maintains a watertight path to prevent external leaks
• Symptoms of failure: dripping during fill, puddles beneath the unit, or visible cracks/splits in the hose
• A significant leak may lead to low water level or extended fill times

• Disconnect power and shut off the water supply before servicing
• Remove the toe-kick/kickplate; pulling the dishwasher forward may be needed for access
• Place a towel or pan to catch residual water; move clamps, remove the old hose, and fully seat the new hose on both fittings
• Re-secure clamps, restore water and power, and run a short fill to check for leaks before reinstalling panels

This control box top is the plastic cover that protects the appliance's control board and user controls while keeping the front of the console finished and safe. It helps prevent dust, moisture, and accidental contact with internal electronics. What it does

• Covers and protects the control board and internal wiring behind the console.
• Provides the mounting surface and openings for buttons, knobs or touch interfaces.
• Prevents dirt, lint, and moisture from reaching sensitive electronics.
• Restores a secure, finished appearance to a damaged or cracked console area.

• Always disconnect power to the appliance before beginning work to avoid electrical shock.
• Remove any bezel, screws or clips securing the old top and transfer any required mounting hardware or trim pieces.
• Handle the control board and connectors with care; avoid touching circuit components or bending contact pins.

Size: 8-16 x 2 inch ss.

Restore your appliance's factory look with this badge assembly. It replaces a missing, cracked, or faded logo on the refrigerator exterior, delivering a clean, professional appearance without affecting performance or operation.

• Decorative nameplate/logo for the refrigerator exterior
• Replaces cracked, faded, loose, or missing badge
• Restores a clean, factory appearance
• Cosmetic component; does not impact cooling or function

• Disconnect power before servicing the appliance
• Protect the finish; use a plastic trim tool to remove the old emblem if needed
• Clean and dry the mounting area; align with locating marks/holes and secure per your model diagram

The Filter Coarse is an OEM component specifically designed for GE dishwashers. It refers to the screen installed before the wash pump that traps soil and food particles. Subject to continuous wear from both water circulation and collected debris, the filter mesh can worsen over time.  

Causes of a bad coarse filter include:

• Clogged perforations blocking drainage and reducing water pressure  
• Loose mounting clips releasing trapped soils back into wash water instead of tube drain 
• Stretched or warped mesh no longer shutting tight to form a watertight seal

Symptoms of a failed coarse filter include:

• Soil tracked throughout the dishwasher unseen 
• Excessive residue left on dishes after washing and rinsing cycles
• Puddling inside the tub or continuing sound of draining after the cycle ends

This GE replacement part is also compatible with some Hotpoint and RCA models.

This dishwasher drain hose carries wastewater from the drain pump to your home's drain or disposer. Replacing a damaged or clogged hose helps stop leaks and restores proper draining so cycles can complete reliably.

• Routes wastewater from the dishwasher's drain pump to the sink/disposer or standpipe
• Common symptoms of a failed hose: water left in the tub, slow or no drain, leaks under the unit, or water backing up at the sink
• Damage such as cracks, splits, kinks, or internal blockage warrants replacement
• Ensures a secure, leak-resistant path when properly routed and clamped

• Disconnect power and turn off the water supply before servicing; pull the dishwasher forward for access if needed
• Place towels or a pan to catch residual water; remove the old hose and any retained water carefully
• Route the new hose without kinks and create a high loop or use an air gap as required by local codes
• Secure both ends with appropriate clamps/fittings; if connecting to a disposer, ensure the disposer inlet knockout is removed; run a test cycle and check all joints for leaks

The Toe Kick is an OEM replacement part for GE dishwashers. It refers to the horizontal plastic panel positioned below the appliance to protect cabinets and toes. Subject to abrasion and impacts, the toe kick can show signs of wear after extended use. 

Causes of a bad toe kick include:

• Scratches or cracked plastic from contact with pot and pan drawer handles over time
• Dents or punctures resulting from impact with feet or cabinet doors 
• Warping that prevents a flush fit with the rest of the dishwasher facade

Symptoms of a failed toe kick include: 

• Unsightly abrasions detracting from the overall aesthetic 
• Gaps that permit ingression of dust or debris behind the unit
• Compromised protection for kitchen cabinetry below

Color: Black

This GE replacement part is compatible with Hotpoint, RCA, and select Kenmore models.

Size: 10-16 ab.

The AC Harness Assembly is an OEM part for GE dishwashers. As an integral part of the electrical system, this harness is designed to safely connect and supply power to critical components underneath the tub. 

Causes of failure involve cracked insulation, damaged connectors, or grounding problems developing over extended use.

Symptoms of a faulty harness include:

• Intermittent operation of systems or cycles  
• Error codes related to electrical malfunctions
• Loose, detached, or rubbed wires exposing live circuits

This OEM GE replacement is also compatible with select Hotpoint, RCA and select Kenmore models.

Replacement fill funnel hose that routes incoming water into the appliance's fill system. Restores proper water flow to the fill inlet and helps stop leaks at the funnel connection when the original hose is cracked or worn. What it does:

• Channels incoming water from the inlet to the appliance fill assembly.
• Replaces cracked, split, or collapsed funnel hoses that can cause leaks.
• Common symptoms it can fix: water leaking at the funnel connection, slow or incomplete fill, water pooling beneath the appliance.
• Simple direct-replacement part—matches the original funnel hose routing and connection points.

• Always disconnect power and shut off the water supply before servicing the appliance.
• Inspect mating fittings, clamps, and seals; replace clamps or seals if corroded or damaged.
• Use basic hand tools to remove and secure hose clamps; avoid twisting or kinking the hose during installation.

This rack slide support secures the rack slide/rail inside your dishwasher, keeping the rack aligned so it rolls smoothly. Replace a cracked or missing support to restore easy rack movement and help prevent derailments.

• Anchors the rack slide/rail to the tub wall for stable support
• Keeps the rack level and properly aligned as it moves
• Allows the rack to glide in and out smoothly
• Common failure signs include a rack that sticks, sags, derails, or makes grinding/popping noises
• Replace if the bracket is cracked, warped, or missing

• Disconnect power and shut off water supply before servicing
• Remove the rack and release any rack stops as needed
• Detach the slide/rail from the old support and remove the support (tabs or screw)
• Install the new support in the same orientation; reattach the slide and rack and test rack travel