Gdwf160vss Parts

This inner door panel replaces a damaged or worn internal door surface to restore a clean, secure oven/microwave door interior and support proper window assembly alignment. It fits behind the outer door and holds the inner glass in place. What it does:

• Replaces cracked, chipped, or warped inner door surface that can trap debris or affect door closure
• Restores the inner layer that helps keep the door assembly aligned and stable
• Reduces rattling or vibration caused by a loose or broken inner panel
• Helps maintain a clean interior appearance by covering internal components

• Disconnect power (and gas, if applicable) and allow the appliance to cool before starting
• Handle the panel carefully—sharp edges or glass may be exposed; wear gloves and eye protection
• Keep all original fasteners and note screw locations
• After installation, confirm the door closes and seals correctly and test the appliance on a short cycle

Specs: 10-32 gxtt flp.59

This flapper vent is the replacement exhaust flap that helps control dryer airflow and keeps outside air, pests and debris from entering the vent when the dryer is off. Fits many GE dryer exhaust housings. What it does

• Opens during dryer operation to let moist air escape and closes when the dryer is off to block backdrafts.
• Restores proper airflow when a damaged or stuck flap is preventing venting.
• Helps reduce outside odors, drafts and pest entry through the exhaust opening.
• Works as a simple mechanical replacement—no electrical connections.

• Disconnect the dryer from power and, if applicable, turn off gas before servicing.
• Access the exterior vent or the dryer exhaust housing; replacement typically secures with screws or snaps into the vent housing.
• Inspect and clean the vent duct and housing before installing the new flap to ensure proper operation.

This is a replacement fastener screw used to secure panels and components on compatible appliances, restoring proper fit and reducing movement. It's a simple, direct replacement when an original screw is missing or damaged. What it does:

• Secures access panels, covers, or internal components to prevent rattling and movement
• Helps maintain proper alignment of parts so doors and panels close correctly
• Replaces missing, stripped, or broken screws that can cause loose parts or noise
• Restores the appliance's original fit where a matching OEM fastener is required

• One replacement screw

• Turn off and unplug the appliance before starting any repair
• Use the correct driver and avoid over-tightening to prevent stripping threads
• If the original screw was holding electrical components, ensure power is disconnected and follow OEM safety instructions

This flood switch is a small water-sensing switch that alerts the appliance control when liquid collects where it shouldn't, helping stop leaks and prevent additional water damage. It's a direct-fit replacement used in compatible GE appliances. What it does:

• Detects presence of unwanted water and signals the appliance control or valve
• Can stop water flow or trigger an error when a leak or overflow occurs
• Commonly replaces a failed sensor that leaves water pooling in the appliance base
• Helps resolve symptoms such as water in the bottom pan, intermittent leak-related error codes, or continuous filling faults tied to a failed sensor

• One flood switch (water sensor) as pictured

• Disconnect power (and water supply, if applicable) before installing
• Handle the sensor and connector carefully; avoid pushing the sensing surface into sharp objects
• Reconnect wiring/fasteners exactly as removed and secure any mounting clips to prevent false readings
• Test the appliance per OEM instructions after installation to ensure proper operation

This is a stainless-steel outer door panel that restores the appliance's exterior appearance and provides the finished surface for the door assembly. It replaces a damaged, dented, or scratched outer door skin to improve looks and protect internal components. What it does:

• Serves as the outer skin for the refrigerator/freezer door, forming the visible exterior surface.
• Protects inner door components, insulation, and wiring from damage and moisture.
• Restores a flush, uniform appearance when the original panel is dented, scratched, or corroded.
• Compatible with factory mounting points to mate with the existing inner door and trim.

• One stainless-steel outer door panel.

• Handle, trim, insulation, and hardware are only included if explicitly listed.
• Disconnect power and remove stored items from the door area before beginning work to prevent injury or damage.
• Use caution with sharp edges and support the door to avoid dropping or bending the panel during installation.

This bag and bracket assembly collects lint and debris and secures the disposable bag inside the appliance to maintain airflow and catch particles before they reach the exhaust. Replacing a worn or torn assembly helps restore proper lint capture. What it does:

• Holds a disposable lint bag in place so debris is captured during operation
• Prevents lint from bypassing the bag and clogging the appliance or exhaust
• Restores proper airflow when a damaged or full bag causes reduced performance
• Helps reduce lint buildup that can trigger odors or require frequent cleaning

• Disconnect power to the appliance before service to avoid shock or injury
• Remove the old assembly carefully to avoid spilling lint; wear gloves if needed
• Install the bracket so the bag is oriented and secured per the appliance fitment
• Inspect the surrounding cavity for trapped lint and clean before installing the new assembly

Specs: 8-18 va trt 7/16