Ge Gsd1180x66ww Parts

Replaced spray arm assembly, it's a different style than what was in the dishwasher but it's an easier style to work with. I also ordered support assembly and did not need it,spray arm assembly was all I needed. Read more

First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then... Read more

I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more

Ordered complete solenoid kit, valve seal, and sol mounting screws. Watched repair video and it works great. Read more

The Piston and Nut assembly replaced Check Valve and Body and gasket replaced Read more

I originally thought it was just accumulated dirt and sludge in the sump and the lines. I cleaned all that and it was not the cause. Saw this video...took off the filter frame and the piston & nut assembly was definitely broke (cap deteriorated to nothing). Need pliers to break it free as in the video. I accidentally ripped the screen taking off the filter frame, and saw a hole from the heating rod on top of the inlet cover so I replaced them too. Very easy replacement project once it was... Read more

We called your company and you found it. We had called several others including GE with no success. Read more

We removed the spray arm from the Spray Arm Hub and Support Assembly (GE part WD22X126) and discovered that the Check Valve (GE part WD1X5488), which prevents dirty water from flowing back into the tub, was missing completely. Replacement was very easy - the soft rubber valve pushes into position from the inside of the Support Assembly. We also found that the Plastic Thrust Washer (GE part WD3X766) inside the center of the Spray Arm Hub had eroded considerably, so we replaced that as well. Read more