Ge Jgb860sejss Parts

This rangetop and bracket assembly secures the cooktop to the range and keeps the top aligned for safe, stable cooking. Replaces a worn or damaged support assembly to reduce wobble and restore proper fit and function. What it does:

• Supports and stabilizes the cooktop surface and rangetop components
• Maintains correct alignment between the cooktop and range frame
• Prevents rattling, shifting, or gaps caused by a damaged bracket or warped top
• Restores safe, even seating of burners and cooktop parts

• Disconnect power and turn off gas supply before servicing
• Handle sheet metal carefully to avoid cuts; use gloves and eye protection
• Basic hand tools are typically required; follow the range's service manual for steps

Size: 8 - 18 ab hxw 5/8 s

This right-hand hinge assembly secures and guides your refrigerator door for smooth opening and reliable closure. Replacing a worn hinge restores correct door alignment and helps stop sagging, rubbing, or noisy operation. What it does:

• Supports the right-side refrigerator door and maintains proper alignment
• Allows the door to pivot smoothly during opening and closing
• Helps ensure a consistent seal to protect internal temperatures
• Commonly replaces hinges that are bent, worn, or making grinding or squeaking noises

• Disconnect power to the appliance before starting any repair.
• Remove food and all loose items from the door; support the door while replacing the hinge.
• This repair may require two people to safely hold and align the door during installation.
• Use appropriate tools and follow the refrigerator's service manual for torque and alignment details.

A receiver hinge that secures and supports an oven door hinge pin to keep the door aligned and operating smoothly. Replaces a worn or broken receiver to restore proper door fit and movement. What it does

• Accepts and retains the oven door hinge pin so the door opens and closes correctly.
• Supports door weight to prevent sagging or uneven alignment.
• Helps the door latch and seal properly for safe, consistent operation.
• Commonly replaced when the door drops, rubs, or will not stay closed.

• One receiver hinge

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Remove the oven door or access panel per the service manual for safer installation.
• Use basic hand tools; check hinge pins and mating hardware for wear and replace if needed.

The Igniter Glowbar is an OEM component specifically designed for GE gas ranges. It is responsible for heating up to generate the high temperatures required to ignite the gas burners.

Symptoms of a bad igniter glow bar include:

• Inconsistent or intermittent burner ignition  
• Burners failing to light or staying lit
• Dim or weak glow when attempting to ignite burners 

Causes of a bad igniter glowbar can include deterioration of heating elements after heavy use over time, cracks or damage due to mishandling or impact, or premature failure of electronic components.   

This OEM GE replacement is compatible with Hotpoint, RCA, and Kenmore ranges.

The Orifice Holder is an OEM part for GE gas ranges. It secures the orifice spud in place, maintaining proper alignment of gas ports to burner tubes.  

The orifice holder prevents any movement or misalignment of gas passages, ensuring uninterrupted and precise fuel delivery. Correct positioning is critical for safe, efficient combustion and optimal heat levels.

Causes of a faulty holder can include wear and tear, damage from impact or heat exposure, or loose fasteners allowing misalignment over time.

Symptoms of a bad orifice holder include:

• Unstable or uneven burner flames  
• Inability to adjust oven temperature as needed
• Gas leaks near burner area
• Abnormal burner combustion noises

Replacing with this genuine OEM GE part restores secure orifice placement and optimized gas flow. It is also compatible with Hotpoint, KitchenAid, and select Kenmore gas range models.
 

This surface burner valve regulates gas flow to a single cooktop burner for smooth, precise flame control. Replacing a worn valve can restore reliable ignition and adjustment on the affected burner while maintaining safe operation.

• Regulates and meters gas from the manifold to one surface burner
• Works with the control knob to provide simmer-to-high flame settings
• Common failure symptoms include: burner won't ignite, weak or unstable flame, gas odor near the knob/valve area, or a knob that is hard to turn
• Labeled "270" per GE specification to match the correct valve style/position used in select models

• Disconnect power and shut off the gas supply before servicing
• Access the manifold; note the valve's position and orientation before removal
• Reassemble and check all connections for leaks using an approved leak-detection solution
• If the burner still won't light, also inspect the burner orifice, igniter, and spark system

Oven deflector redirects oven heat away from the rear panel and components to protect surfaces and help restore more even cooking. Fits in the rear of the oven cavity and replaces a warped or damaged deflector. What it does:

• Directs and deflects heat away from the oven back wall to reduce hot spots and help improve cooking consistency.
• Protects interior liners and nearby components from excessive heat that can cause warping or discoloration.
• Common replacement signs: visible dents, warping, heat discoloration, or uneven baking/broiling.

• Disconnect electrical power (and gas supply for gas ovens) before starting any repair.
• Remove oven racks and mounting hardware; handle part carefully—edges may be sharp.
• Install in the original orientation and secure with the original fasteners; replace missing fasteners with appropriate OEM parts.

This oven light gasket fits between the glass lens and the oven liner. It restores a proper seal around the light opening to help keep grease and moisture out of the light cavity and hold the lens securely in place. What it does:

• Seals the joint between the oven light lens and the cavity wall
• Helps prevent grease and moisture from entering the light assembly
• Keeps the lens snug to reduce looseness or rattling
• Replace if the gasket is cracked, flattened, brittle, missing, or if moisture/grease is visible around the lens

• One oven light lens gasket

• Disconnect power at the breaker and allow the oven to cool completely
• Remove the light lens/retainer as your model requires (unscrew lens or release clips)
• Note gasket orientation and clean the mating surfaces
• Seat the new gasket evenly and reinstall the lens; do not overtighten the glass

The Convection Motor is an OEM part for GE gas ranges. It is the component responsible for circulating hot air around food inside the oven cavity during convection cooking cycles. 

Causes of a bad convection motor include failed windings, worn bearings, or damage from excess heat over time.

Symptoms of a bad convection motor include:

• Inability to select convection cooking functions 
• Lack of air movement inside the oven
• Slower than normal cooking times 
• Uneven baking or roasting results

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This replacement door hinge restores proper door alignment and smooth opening on compatible GE refrigerators. It provides the durable pivot point needed to keep the door seating correctly and reduce sag or binding. What it does:

• Replaces a worn or bent hinge to correct door sag and uneven gaps
• Restores smooth pivoting for easier opening and closing
• Helps ensure a proper door seal to maintain cooling performance
• Addresses symptoms like door dragging, misalignment, or rubbing

• One replacement door hinge

• Verify hinge orientation and mounting location before installation
• Support the door while removing/installing hinge hardware to prevent damage or injury
• Use appropriate tools and follow manufacturer torque recommendations if available
• Disconnect power and remove stored items from the door if work affects electrical components

This stainless steel manifold panel restores the front-facing trim and protection around the cooktop/oven gas manifold area, returning a finished look and shielding internal components from spills and debris. What it does

• Covers and protects the manifold and control area from spills, grease, and accidental contact
• Restores the appliance's front appearance when the original panel is dented, scratched, or corroded
• Helps maintain proper airflow/clearance around controls and valves when installed correctly
• Common replacement for visible damage or after servicing internal components

• Disconnect power and shut off the gas supply before starting any work
• Handle edges carefully; metal trim can be sharp
• Installation typically requires removing control knobs and/or the cooktop; keep fasteners organized
• If gas valves or lines are disturbed, check connections and test for leaks