Ge Pvm9179sf1ss Parts

This temperature thermistor is the sensor that lets the control board monitor and regulate appliance temperature for reliable cooling performance. Replacing a failing thermistor can restore proper temperature control and cycling. What it does:

• Senses internal temperature and sends readings to the control board
• Helps the compressor, fans, and defrost system run at the right times
• Commonly linked to symptoms like incorrect temperatures, overcooling, or frequent on/off cycling
• A faulty thermistor can cause improper defrost timing or erratic cooling behavior

• Disconnect power before inspecting or replacing the sensor to avoid shock
• Handle the sensor and wiring connector gently to avoid damage
• Mount the sensor in the original location and secure wiring per OEM routing

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This circulation motor powers air movement inside the appliance to maintain proper airflow and even temperatures. Replacing a failed motor restores circulation for more consistent cooling and reduces noise or performance issues. What it does:

• Spins the fan to circulate air through the cooling/ventilation path
• Helps maintain even temperatures and proper airflow in the appliance
• Commonly replaced when airflow is weak, cooling is uneven, or the motor is noisy
• Stops operation if the motor fails, which can lead to frost buildup or reduced performance

• Disconnect power to the appliance before starting any repair
• Access and mounting steps vary by model; follow the appliance's service manual or wiring diagram
• Handle wiring connectors carefully and confirm proper fan rotation before reassembly

This noise filter board helps suppress electrical interference to protect controls and reduce audible buzzing or display interference. It fits into the appliance's power/control area to help stabilize operation. What it does:

• Filters electromagnetic and radio-frequency interference on the power line
• Can stop or reduce buzzing, static, or interference affecting displays and controls
• Helps prevent false error codes or intermittent control issues linked to electrical noise
• Works as part of the appliance power/control circuitry for cleaner power delivery

• One noise filter board

• Always disconnect power before accessing or replacing the filter board
• Handle the board carefully and avoid touching components or connectors directly
• Verify the part number on your appliance match before installation

This is a truss-head self-tapping screw used to secure appliance panels and trim. It replaces a lost or damaged mounting screw to restore proper fit and stop rattles or loose parts. What it does

• Secures trim, panels, brackets or small components where a low-profile, wide-head screw is required
• Self-tapping design cuts threads into sheet metal or similar substrates—no nut required
• Restores tight mounting to reduce vibration, rattling or misaligned panels
• Commonly used in refrigerators, ranges and other household appliances

• One truss-head self-tapping screw

• Disconnect power to the appliance before servicing and work on a cool appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten—turn until snug and the part is secure but not distorted
• Replace with the exact part number to ensure fit and function

This heater sheath is the protective metal sleeve that surrounds a dryer/oven heating element, helping protect the element and focus heat where needed for reliable appliance heating performance. What it does:

• Protects and supports the heating element inside the appliance
• Helps direct and contain heat for efficient operation
• Can prevent direct contact between the element and surrounding components
• Commonly replaced when the sheath is corroded, dented, or damaged
• Linked to uneven heating or visible element damage

• High-level replacement only; disconnect power before servicing to avoid shock hazard
• Inspect surrounding components (element, terminals, mounting clips) and replace any damaged parts
• Use proper fasteners and ensure sheath is seated securely to avoid contact with other components

This tapping pan-head screw secures interior panels and components in appliances, providing a low-profile head and threads that form into metal for a firm hold. It's a direct-fit fastener for repairs and replacements. What it does

• Fastens panels, brackets and small appliance components where a self-tapping screw is required
• Pan-head profile gives a flush, low-profile finish that resists snagging
• Threads cut into mating metal to create a secure attachment without a nut
• Commonly used where sheet-metal or thin-frame fastening is needed

• One tapping pan-head screw

• Use the correct screwdriver bit that matches the screw recess to avoid stripping
• Start in a pilot hole or with light initial pressure to ensure proper thread formation
• Tighten until snug; do not over-torque — overtightening can strip threads or deform panels
• Wear eye protection when working with metal fasteners and sheet metal

This is the microwave's magnetron—the high-voltage tube that generates microwave energy to heat food. Replacing a failed magnetron can restore normal heating performance and consistent cooking. What it does and common symptoms:

• Produces the microwave energy that heats and cooks food
• Microwave runs but doesn't heat
• Loud humming or buzzing from the high-voltage section
• Trips the internal fuse or household breaker at start-up
• Unusual burning odor indicating an internal short

• 1 magnetron

• Unplug the microwave; the high-voltage capacitor can retain a dangerous charge even when unplugged.
• Handle the antenna dome carefully; avoid touching or contaminating its surface.
• Transfer any required brackets, insulators, or thermal cutouts from the original part as designed; ensure correct orientation and secure mounting for proper cooling.
• Reinstall all covers, grounds, and door-interlock components exactly as designed before testing.

This door latch spring restores the correct return tension in the latch mechanism so the door secures and releases reliably. Replacing a fatigued or broken spring brings back smooth latch action and dependable door operation. What it does:

• Provides the return tension for the door latch mechanism
• Helps the latch engage and release properly
• Common failure signs include a door that won't latch or pops open, or a latch lever that feels loose or sticks
• Some cycles may not start if the door isn't recognized as closed

• 1 door latch spring

• Disconnect power before servicing
• Access the latch mechanism; note the spring's original routing and anchor points
• Use needle-nose pliers and eye protection when removing/attaching the spring
• Test latch movement and door operation before reassembly

This lamp bracket secures the oven/range light assembly in place so the bulb and socket stay aligned for reliable interior lighting. It restores a stable fit when the lamp or housing is loose or mispositioned. What it does:

• Holds the lamp socket or housing firmly to the appliance cavity to prevent movement and rattling.
• Maintains proper lamp alignment so the bulb illuminates the cooking cavity as intended.
• Helps reduce intermittent lighting or poor contact caused by a loose bracket.
• Fits into the lamp/light housing area and provides a mounting point for the bulb assembly.

• One lamp mounting bracket.

• Disconnect power to the appliance before starting any repair to avoid shock hazard.
• Remove the bulb and any trim or covers to access the bracket; handle the bulb with gloves or a cloth.
• Typical installation uses basic hand tools; keep track of screws and orientation for reassembly.
• If wiring or the lamp socket is damaged, inspect and replace those components separately.

This is a binding-head screw used to fasten panels and components on compatible GE appliances. It provides secure, low-profile fastening where a binding head design is required for proper fit and alignment. What it does

• Secures panels, brackets, or small assemblies to prevent movement or rattling.
• Replaces a missing or stripped screw that causes loose parts or squeaks.
• Restores proper alignment for components that rely on the binding-head profile.
• Works where a shallow, rounded head and threaded shaft are specified.

• Use the correct driver size to avoid cam-out or head damage.
• Do not overtighten; snug until secure to avoid stripping threads or damaging parts.
• Disconnect power and follow all appliance-specific safety procedures before accessing panels.

This heater holder is the mounting bracket that secures the oven heating element in place so the element stays aligned for reliable heating and safe operation. It helps prevent movement that can cause uneven cooking or damage. What it does:

• Holds and stabilizes the oven/heater element in the cavity so it stays properly positioned
• Keeps the element from contacting other components, reducing the risk of shorts or damage
• Helps maintain even heat distribution by preventing element sagging or misalignment
• Fits where the element mounts and supports normal operation of the heating circuit

• One heater holder/mounting bracket

• Turn power to the appliance off at the breaker before servicing to avoid shock
• Inspect the element and surrounding insulation for damage when replacing the holder
• Typically secures with screws or clips—retain hardware and note orientation for reassembly

This turntable shaft connects the microwave's turntable motor to the glass tray, keeping the tray centered and rotating smoothly for even cooking. Durable replacement for worn or damaged shafts. What it does:

• Couples the turntable motor to the glass tray so the tray spins during operation
• Centers and supports the glass tray to prevent wobbling or scraping
• Restores smooth rotation if the tray slips or turns intermittently
• Stops grinding or scraping noises caused by a bent or worn shaft

• Disconnect power before attempting any service.
• Remove the glass tray and roller support, then lift out the old shaft.
• Seat the new shaft onto the motor drive pin and reinstall the roller support and glass tray, ensuring proper alignment.
• Test operation at short intervals to ensure smooth rotation and no unusual noise.