Ge Wjsr4160g1ww Parts

Best Seller

Genuine Ge part

Knob Clip

By: Ge

Part Number: WH01X10106

The Knob Clip is an OEM part for GE washing machines and dryers. This small but crucial component is designed to secure the control knob to the appliance's control panel.

Over time, knob clips can wear out or break due to frequent use or accidental damage. When this happens, the control knob may become loose, fall off easily, or fail to engage the control panel properly, making it difficult to set the appliance to the desired cycle or function.

Symptoms of a bad Knob Clip include:

The control knob is loose or falls off the panel easily.
Difficulty in adjusting settings due to a loose knob.
The knob does not stay in place or slips when turned.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You I was unable to select a cycle knob wouldn't advance and stay Tamara I. • Hatfield , PA • September 23, 2014

I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more

Best Seller

Genuine Ge part

Washer Top

5.0 (7)

By: Ge

Part Number: WH44X21834

The Washer Top is an OEM part for GE washers. It is the upper panel that covers the internal components of the washing machine and provides a flat surface for loading and unloading laundry.

Causes of a bad Washer Top can include physical impact, warping due to prolonged exposure to heat or moisture, or general wear and tear over time.

Symptoms of a bad Washer Top include:

Visible cracks, dents, or damage to the top panel
Difficulty opening or closing the lid due to misalignment or warping
Water leaks around the top area during wash cycles
Excessive noise or vibration caused by a loose or damaged top

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The lid and the top we’re both rusty and paint coming off. Paul D. • Lilburn , GA • January 26, 2018

I bought and replaced the top and the lid for the washer. The washer now looks like a brand new washer even though it’s 12 years old. Total repair took less than an hour. Read more

Genuine Ge part

Funnel Bleach

5.0 (6)

By: Ge

Part Number: WH01X10057

Do-It-Yourself Stories from Customers like You Broken bleach funnel Richard M. • Huntsville , AL • April 10, 2018

Took out the broken one and snapped the new one in , done. Read more

Genuine Ge part

Drain Hose

4.9 (9)

By: Ge

Part Number: WH41X374

The Drain Hose is an OEM part for GE washing machines. It is specifically designed to channel used water out of the washer and into the household drainage system.

Causes of a bad drain hose can include physical damage from movement or installation, clogging from lint and debris, or degradation of the hose material over time, leading to leaks and inefficiency.

Symptoms of a bad Drain Hose include:

Water leaking from the back or underside of the washing machine
Pools of water around the area where the washing machine is installed
Signs of wear or damage to the hose, such as cracks, holes, or bulging

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Have water leak Carl W. • Hopkins , MI • June 26, 2015

I did it Read more

Genuine Ge part

Drive Motor

4.8 (13)

By: Ge

Part Number: WH20X10093

This genuine OEM part is a drive motor for washers. The drive motor is the main engine that drives the washer tub allowing it to rotate and wash clothes effectively. If the washer is no longer spinning or the power has significantly decreased, it might be a sign that the drive motor needs to be replaced. Luckily, replacing this part is a relatively simple repair.To replace the drive motor, start by unplugging the washer. Once unplugged, move the washer away from the wall to gain access to the back panel. Uninstall the back panel by removing the screws that attach it. After removal, locate the drive motor and proceed to unthread the mounting screws holding it to the washer. Proceed to pull the old motor out of its place and install the new motor by threading the screws that secure it. This replacement part is sold individually and is compatible with GE, RCA, and Hotpoint brand washers.

Do-It-Yourself Stories from Customers like You Filled up and ran through cycle but would not agitate or spin David R. • Ada , OH • July 04, 2014

New motor. The motor was ok, but the control board mounted on the motor wasn't. Can't buy to control board separate from the motor. Easy to replace the motor, but not so easy to troubleshoot to make sure the problem was the motor and not something else. Read more

Genuine Ge part

Wireform Hinge (Long)

By: Ge

Part Number: WH1X2743

Genuine Ge part

Clamp Tub Outlet

By: Ge

Part Number: WH01X10134

Genuine Ge part

Switch Rotary

5.0 (1)

By: Ge

Part Number: WH12X10499

Do-It-Yourself Stories from Customers like You Washing machine transmission leaking oil Mary M. • Cross Lanes , WV • May 17, 2016

Replaced transmission, all seals, and dampers. It is a complicated, messy repair but costs much less than replacing the machine. This is the second tranny I have put in the 30 year old machine and now it works like new. Take the time to replace all seals if you do this repair. No use putting a new tranny in with old seals that will crack. Read more

Genuine Ge part

Switch Rotary

4.0 (1)

By: Ge

Part Number: WH12X10461

Do-It-Yourself Stories from Customers like You Temperature control on clothes washer Jonnie R. • Long Valley , NJ • July 20, 2014

Replaced obvious defective part with purchased item. Read more

Genuine Ge part

Terminal Housing

By: Ge

Part Number: WH12X497

Harness to corset & shifter

Genuine Ge part

Terminal (12-Pack)

5.0 (2)

By: Ge

Part Number: WD1X1434D

Includes 12 terminals.

Do-It-Yourself Stories from Customers like You Terminal receptacle was fried Phillip M. • Indianapolis , IN • May 12, 2015

I had to replace the 3 terminals and try to put them in the new terminal receptacle. I replaced the lid switch because I broke the old one trying to diagnose the problem. I found the helpful video on this site after I had already started. Read more

Genuine Ge part

Self Locking Strain Relf

By: Ge

Part Number: WH12X10208

Genuine Ge part

Timer

4.9 (21)

By: Ge

Part Number: WH12X10348

Do-It-Yourself Stories from Customers like You Washer timer know would not turn washer on while dial would Gail R. • Arvada , CO • August 24, 2015

Ordered new timer, dial and control knob assembly. After unplugging machine I removed the knobs from the control consul. Removed three screws holding consul face plate from rear of machine. Moved faceplate forward to gain access to electronic components. Timer is located on right with one hold down screw which I removed. Lifting timer from mount location I removed wiring harness. Installed harness on new times and inserted into hole for knob. It would be helpful if front was market on timer.... Read more