Gfe28gelkds Parts

This middle door cover is the molded interior trim piece that restores the refrigerator door's appearance and protects internal components and insulation. Replacing a damaged cover improves fit and looks without changing door function. What it does:

• Covers and protects internal door cavities, wiring and insulation behind the middle section
• Restores a secure mounting surface for door bins and shelves
• Replaces cracked, warped or cosmetically damaged trim that allows gaps or loose fittings
• Helps maintain a proper door seal by ensuring correct bin/shelf alignment

• One middle door cover (dark gray)

• Disconnect power to the appliance before servicing
• Remove door bins/shelves and any fasteners that secure the cover; keep hardware for reuse
• Align tabs and screw holes, then install using the original fasteners; do not force the part into place

This is a replacement screw used to secure appliance components and panels so parts stay properly attached for safe operation. It's a direct-fit fastener matching OEM form and function. What it does

• Secures panels, trim, or internal components to prevent rattling or gaps
• Restores factory attachment where a screw is missing or stripped
• Helps maintain proper alignment of housing and service access
• Suitable when repair requires original-fit fasteners

• Disconnect power or unplug the appliance before servicing to avoid shock
• Use the matching screwdriver or bit to avoid stripping the head
• Thread carefully and avoid overtightening to prevent damage to threads or plastic parts
• Keep removed screws organized; replace only the screws that match the original locations

This fan gasket assembly seals the refrigerator/freezer fan housing to help maintain proper airflow and reduce noise. It replaces a worn or damaged seal to restore smoother fan operation and improve cooling performance. What it does:

• Creates a tight seal around the fan housing to prevent air bypass and reduce frost or temperature issues
• Dampens fan vibration to help lower operational noise
• Helps channel airflow for more efficient cooling
• Commonly used when you hear a noisy fan, notice reduced cooling, or see frost/ice buildup near the evaporator

• One fan gasket assembly

• Disconnect power to the appliance before beginning any repair
• Access may require removing interior panels or the evaporator cover—keep track of fasteners
• Handle thin gasket material carefully to avoid tearing; avoid stretching during installation

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This screw hinge center adjuster is a replacement hinge screw that helps align and secure the appliance door for smooth opening and a proper seal. Designed to restore correct door positioning and prevent sagging or uneven gaps. What it does:

• Replaces the center hinge screw/adjuster used in the door hinge assembly
• Helps realign the door to correct sagging, uneven gaps, or misalignment
• Secures hinge parts to maintain stable door movement and a tight seal
• Compatible with common symptom: door rubbing, dragging, or not closing evenly

• One screw hinge center adjuster

• Basic hand tools required; support the door during removal and installation
• Follow manufacturer service manual steps for hinge removal and door alignment
• Keep fasteners snug but avoid over-tightening to prevent stripping
• Turn off power to powered doors/controls and work with care around edges

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This wheel overmold assembly replaces a worn front wheel to restore smooth drum rotation and reduce noise. It mounts to the dryer front support to help the drum roll evenly and prevent metal-on-metal wear. What it does:

• Provides a cushioned wheel surface that supports the dryer drum and improves rotation
• Reduces squeaking, scraping and grinding caused by a worn or damaged front wheel
• Helps maintain proper drum alignment for even tumbling and reduced wear on seals
• Extends the life of the front support by preventing direct metal contact

• Disconnect power before beginning repair to avoid electrical hazard
• Access the front support assembly per your dryer's service instructions; inspect adjacent rollers and glides for wear
• Fit the overmold onto the wheel hub and secure per OEM guidance; verify smooth drum rotation before reassembly
• If other support components show wear, replace them to prevent premature failure

A small rubber grommet that cushions and seals the freezer liner, helping reduce vibration and prevent wear where components meet the inner cabinet. Replaces a worn or missing grommet to restore a snug fit and quieter operation. What it does

• Cushions the freezer liner and components to reduce rattling and vibration.
• Helps maintain a tight seal at the liner mounting point to limit movement and wear.
• Prevents direct metal-to-metal contact that can cause chipping or cracking of the liner.
• Commonly replaced when the liner is loose, noisy, or damaged around mounting points.

• Designed for direct replacement; remove power before accessing the freezer interior.
• Access may require removing shelves, drawers, or the liner trim; handle liner edges carefully.
• Inspect surrounding clips and fasteners; replace any damaged hardware to ensure proper fit.

The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.

Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.

Symptoms of a bad Door Light Switch include:

• Refrigerator light not turning on or off correctly
• Light flickering or remaining dim
• Light staying on even when the door is closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cover Latch is an OEM part for GE refrigerators. This part serves as a cover for the latch handle, ensuring a seamless look for the appliance while protecting the latch handle from damage and wear.

Causes of a bad Cover Latch can include wear and tear over time, impact or mishandling that leads to cracks or breaks, or general deterioration due to prolonged use.  

Symptoms of a bad Cover Latch include:

• Visible cracks or breaks
• The latch handle not being properly covered
• Difficulty in operating the latch handle
• Loose or missing cover latch

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The LED Light Assembly is an OEM component specifically designed for GE refrigerators. It illuminates the interior compartments with an energy-efficient light source.

The LED light assembly provides bright, consistent illumination to easily view contents without excessive power consumption. Its durable construction withstands high/low temperatures inside the fridge cavity. 

Symptoms of a bad light assembly include:

• Dim or flickering illumination that makes visibility poor
• Lights that won't activate at all or stay on constantly  
• Overheating LEDs or ballasts that cause burn marks

Causes of failure can be related to power cycling over time that degrades electronic drivers. Physical damage from cleaning chemicals or impact is also possible.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. Replacing an outdated light restores optimal vision and saves on operating costs versus inefficient bulb replacements.
 

The Freezer Basket & Glide is an OEM part for GE refrigerators. It is designed to provide organized storage within the freezer compartment, allowing for easy access and efficient use of space. The glide mechanism ensures smooth movement of the basket in and out of the freezer, enhancing the user experience and convenience.

Causes of a bad freezer basket and glide can include physical damage from heavy or awkwardly shaped items, wear and tear from frequent use, or misalignment due to improper installation.

Symptoms of a bad freezer basket and glide include:

• Difficulty sliding the basket in and out
• Basket not staying on track or coming off its glide
• Visible cracks or breaks in the basket or glide mechanism
• Unusual noises when moving the basket

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Icemaker is an OEM replacement part for GE refrigerators. It is responsible for producing and dispensing ice cubes, ensuring a constant supply of fresh ice for your beverages and other cooling needs.

Symptoms of a bad icemaker include:

• Not producing any ice or producing insufficient quantities
• Ice cubes that are misshapen, clumped together, or have an off-taste
• Leaks or water buildup in the icemaker compartment
• Strange noises or grinding sounds during ice production

Causes of a bad icemaker can include water supply issues, such as low water pressure or a blocked water line, electrical malfunctions, or mechanical problems with the icemaker components, like a faulty ice mold or ejector arm.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The RFID Water Filter Board is an OEM part for GE refrigerators. It is an electronic component located inside the filter housing that reads the RFID chip in Genuine GE water filters. The board monitors filter life and provides notification when it's time for a replacement. 

Symptoms of a bad RFID water filter board include:

• Inability to detect when a new filter is installed  
• Error codes or filter life indicators not functioning properly
• Water dispenser not working or dispensing unfiltered water

Causes may include damage from moisture or leaks over time, failure of electronic components, or normal wear and tear.

This replacement board is also compatible with Hotpoint, RCA, and some Kenmore models.