Gfss6kkass Parts

This freezer evaporator fan motor assembly drives the fan that moves cold air across the evaporator coils and circulates it through the cabinet. Replacing a weak or failed motor restores airflow for more consistent, reliable cooling performance.

• Circulates air across the evaporator coil to remove heat from the freezer
• Helps distribute cold air to maintain stable temperatures
• Common symptoms: fan not running, intermittent operation, loud squealing/rattling, weak or no airflow from vents, warmer-than-normal temperatures
• Supports proper defrost airflow around the evaporator area

What's included: 1 freezer evaporator fan motor assembly Install notes:

• Unplug the refrigerator before servicing; wear cut-resistant gloves
• Remove freezer contents/shelves and the rear panel to access the motor
• Note wire connector orientation and routing; keep wiring clear of the fan path
• After mounting, ensure the fan spins freely; restore power and verify airflow

This is the left-side freezer evaporator fan motor. It spins the fan to draw air across the evaporator coil and circulate cold air, restoring proper airflow, quieter operation, and stable temperatures when the original motor is weak, seized, or noisy.

• Circulates air across the freezer evaporator coil to move cold air through the compartment
• Supports even cooling and temperature recovery after door openings
• Helps limit frost buildup on the back panel by keeping air moving
• Failure symptoms include weak or no airflow, loud or intermittent fan noise, rising freezer temperature, or soft/melting ice

• Disconnect power before servicing; wear cut-resistant gloves
• Remove freezer drawers/shelves and the rear panel to access the motor
• Note wire orientation; transfer the existing fan blade and any reusable mounting hardware from the old motor
• Ensure the blade spins freely and the shroud is clear before restoring power and checking airflow

This is a black French door trim assembly that restores the exterior appearance and proper sealing of compatible French-door refrigerators. It replaces worn or damaged trim to help doors close evenly and maintain a clean, finished look. What it does:

• Replaces damaged or cracked trim on a French-style refrigerator door
• Restores proper edge alignment so doors close and seal more reliably
• Improves cabinet appearance by covering exposed edges and hardware
• Helps prevent drafts and moisture intrusion along the door perimeter

• Intended for appliance technicians or experienced DIYers; disconnect power and empty door before beginning
• Basic hand tools typically required; support the door during removal/installation to avoid strain
• Inspect adjacent seals and hardware while installing; replace any worn gaskets or fasteners separately
• Follow manufacturer instructions for torque and alignment to ensure correct closing and sealing

This compressor overload is the start-protection device that helps the refrigerator compressor run safely and restart after an overcurrent or overload. Replacing a faulty overload restores reliable compressor starting and helps protect the compressor motor. What it does:

• Protects the compressor by interrupting power during an electrical overload or locked-rotor condition
• Works with the start relay to allow the compressor motor to start and run properly
• Common symptom: refrigerator not cooling because compressor won't start
• Other symptom: humming or buzzing from the compressor or intermittent starting

• One compressor overload (start device)

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle terminals carefully; install on the compressor per OEM orientation and secure connections

This dispenser cover assembly replaces the plastic trim that surrounds a refrigerator ice/water dispenser, restoring a clean appearance and protecting internal dispenser components from dirt and damage. It helps keep the dispenser area sealed and functioning as intended. What it does:

• Covers and protects dispenser controls, chute and internal components from spills, debris and wear
• Provides a finished, stable surface for dispensing ice or water
• Prevents gaps that can cause chipping or rubbing of items against the dispenser opening
• Common fix for cracked, broken, faded or loose dispenser trim

• One dispenser cover assembly

• Disconnect power to the appliance before beginning work to avoid electrical or mechanical hazards
• Remove any screws or retainers securing the old cover; handle plastic parts carefully to avoid cracking
• Test dispenser operation after installation and ensure all fasteners are secure

A self-tapping screw used to fasten appliance panels and components where a threaded hole is formed as the screw is driven. Provides a secure hold for trim, brackets, and light assemblies during repairs. What it does:

• Cuts its own mating thread in sheet metal or thin plastic to secure panels and brackets
• Helps hold trim, access panels, or internal components in place
• Commonly used where a tapped hole is not present or repair requires a replacement fastener
• Can prevent loose parts and rattles caused by missing or damaged screws

• Unplug the appliance before servicing to avoid electrical or mechanical hazards
• Use the correct screwdriver or bit to avoid stripping the screw head
• Start the screw straight and apply steady pressure; do not overtighten to avoid cracking plastic or stripping metal
• Replace only with the exact part number to ensure proper fit and function

This roller supports the vegetable/crisper drawer so it slides smoothly in and out of the refrigerator. It replaces worn or broken rollers to restore proper drawer movement and reduce sticking or catching. What it does:

• Replaces a damaged or worn roller that prevents the veg/crisper drawer from sliding smoothly
• Helps eliminate drawer binding, uneven travel, or noisy movement
• Supports the drawer weight and keeps the pan aligned on its track

• Disconnect power to the appliance before starting any repair
• Remove the crisper/veg drawer and housing per your model's instructions to access the roller
• Roller typically snaps into a bracket or slides onto a pin; inspect mating parts and replace any broken clips

This evaporator cover assembly protects the refrigerator evaporator coil and helps direct cold airflow for even cooling. It restores proper airflow paths and helps reduce frost buildup for consistent temperature performance. What it does:

• Shields the evaporator coil from direct contact and debris to prevent damage
• Directs cold air through the evaporator compartment for balanced cooling
• Helps minimize frost accumulation on the evaporator when operating correctly
• Reduces rattling or airflow noise caused by a broken or missing cover

• One evaporator cover assembly

• Disconnect power to the appliance before starting any repair
• Remove stored food and defrost the unit if frost blocks access to the evaporator area
• Handle plastic components gently to avoid cracking; use original fasteners and clips
• Inspect and replace other evaporator-area parts as needed for proper sealing and airflow

This main control PBA is the refrigerator's electronic control board that manages user inputs, sensors and compressor/cycle functions to restore normal operation and control. It replaces a failed or unresponsive main circuit board. What it does:

• Interprets front-panel commands and runs the fridge's control logic
• Sends signals to compressors, fans and defrost components to regulate cooling
• Can resolve symptoms like unresponsive controls, no display updates, or erratic cycling
• Fix faults where the appliance won't start or shows control/communication errors

• Disconnect power before servicing to avoid shock or damage
• Handle the board by edges and avoid static discharge; use an ESD strap if available
• Photograph wiring and connectors before removal for correct reassembly
• Reinstall all mounting hardware and proper operation after power-up

This folding refrigerator shelf assembly provides a stable, fold-down shelf surface that frees up space for taller items when needed. It replaces a damaged or missing shelf to restore usable storage and flexible organization. What it does:

• Provides a sturdy, flat shelf surface for storing food and containers
• Folds down to create extra vertical clearance for tall items and large containers
• Replaces cracked, chipped, or sagging shelves that no longer support items safely
• Helps restore proper shelf alignment when the original assembly is warped or broken

• Unplug or power off the appliance before starting any repairs
• Handle glass and plastic parts carefully; wear gloves to protect hands from sharp edges
• Remove food and all items from the area before replacing the shelf
• Verify clips/track alignment and secure the shelf fully into its supports before use