Gmh 3204Xvq-1 Parts

Color: White

The Reflector is an OEM part for Whirlpool microwaves. It is located inside the microwave cavity behind the waveguide and works to redirect electromagnetic waves for more even cooking.  

Symptoms of a damaged reflector include:

• Inconsistent or incomplete heating of foods during cooking
• Hot and cold spots forming within the microwave cavity
• Lower overall power output from the microwave

Causes of reflector damage can be cracking or pitting of the reflective aluminum surface over multiple heating cycles. Impact incidents from user error may also damage its shape.

This OEM Whirlpool replacement assists in delivering uniform energy distribution for optimal microwave performance. This part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper microwave models.

Replace a damaged rack to restore safe, stable support and smooth sliding in the appliance. A new rack brings back full capacity and dependable performance when the original is bent, rusted, or missing.

• Provides a sturdy, level surface to hold items securely during operation
• Slides on existing rails for easy loading and unloading
• Replaces racks that are bent, broken, rusting, or missing
• Helps prevent items from tipping, rattling, or shifting

• Disconnect power and allow any hot surfaces to cool before servicing
• Pull the old rack straight out; retain and transfer any reusable hardware if required
• Align the new rack with the rails and slide it in until fully seated
• Verify smooth travel and proper fit before returning the appliance to service

Restore your microwave's two-level cooking capability. This removable meal rack sits above the turntable to support a second layer of dishes during approved modes, replacing a lost or damaged rack so food heats and circulates as intended.

• Creates a second level for multi-item cooking when your model supports rack use
• Positions food for proper airflow during convection, grill, or combination cycles
• Direct replacement for an original rack that is missing, bent, or corroded
• Addresses wobbling or arcing that can occur with a damaged or improperly positioned rack

• Use only in models designed for a rack; your owner's manual for approved modes and placement
• Set the rack on the designated supports and ensure it does not contact the cavity walls
• Remove the rack for standard microwave-only cycles if your manual instructs
• Allow the oven to cool before handling the rack

The Microwave Filter is an OEM part for Whirlpool microwaves. This filter is designed to capture grease, smoke, and odors generated during cooking, helping to maintain clean air quality and preventing grease buildup inside the microwave and kitchen. The filter measures about 7-1/2 inches wide by 5-1/2 inches deep.

Causes of a bad microwave filter can include clogging from grease and food particles, wear and tear from regular use, or damage from cleaning. A clogged or damaged filter can reduce the efficiency of the microwave's ventilation system and potentially lead to overheating.

Symptoms of a bad microwave filter include:

• Reduced ventilation efficiency
• Excessive smoke or odors during cooking
• Grease buildup inside the microwave or on nearby surfaces
• Visible dirt, damage, or clogging on the filter

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Nut is an OEM part for Whirlpool microwaves. It helps secure various parts within the microwave, ensuring proper assembly and function. It is used to fasten items, keeping them securely in place during use.

A bad microwave nut can occur due to wear and tear over time or accidental damage. If the nut becomes loose, stripped, or misplaced, it can lead to instability and compromise affected parts.

Symptoms of a bad microwave nut include:

• Loose or wobbly parts.
• Difficulty in operating the microwave.
• Unusual noises or vibrations during use.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Comes with 4 supports. Color: chrome.

This support secures and stabilizes a mating component inside your appliance, helping restore proper alignment and fit. Replace a damaged or missing support to stop wobble, sagging, or misalignment.

• Provides structural backing to keep the attached part level and in place
• Helps eliminate rattling, shifting, or uneven gaps
• Replace if cracked, deformed, or missing
• Symptoms can include loose or sagging parts, poor alignment, or difficulty reinstalling shelves/panels

• Disconnect power (and shut off water, if applicable) before service
• Remove the affected shelf/drawer/panel to access the support
• Transfer and reuse any model-specific fasteners or clips
• Seat the new support fully and check alignment before reassembly

This magnetron capacitor is the microwave high-voltage capacitor that helps supply the magnetron with the pulse of energy needed to produce heat. Replacing a failing capacitor restores normal heating performance and reduces arcing or loud humming. What it does

• Stores and releases the high-voltage pulse required by the magnetron so the microwave can generate heat.
• Prevents unstable magnetron operation that can cause weak or no heating.
• Common symptoms of a failing capacitor: oven runs but doesn't heat, intermittent heating, loud buzzing/humming, or visible arcing inside the cavity.
• A failed capacitor can also cause blown internal fuses or tripped circuits.

• One capacitor.

• Disconnect power and verify the appliance is completely de-energized before servicing.
• Capacitors can hold dangerous charge; discharge the capacitor safely with an insulated tool.
• Use the exact replacement part and follow the appliance service manual for routing and connections.

This mounting plate anchors the back of an over-the-range microwave to the wall studs, providing the primary support for installation. Replace a bent, damaged, or missing plate to restore a safe, level, and secure mount.

• Provides the rear-wall anchor point the microwave hangs on during installation
• Helps keep the unit level and securely supported under normal use
• Enables proper alignment so top mounting hardware can fasten correctly
• Typical symptoms: can't hang or align the microwave, unit sags/tilts, rear hooks won't engage, plate is bent or corroded

• Disconnect power before beginning
• Use two people to remove/hang the microwave for safety
• Locate wall studs, level the plate, and fasten per your model's installation instructions with the correct hardware
• The microwave's rear tabs fully engage the plate before final tightening

This support is a factory mounting piece that secures and aligns its mating component inside the appliance. Replacing a worn or broken support restores proper fit, stability, and smooth operation of the associated assembly.

• Provides structural support and accurate positioning for the designated part
• Helps prevent sagging, looseness, and vibration
• Maintains alignment so components latch/seat correctly
• Typical failure signs: cracked or missing support, rattling, misalignment, or parts that won't stay in place

• Disconnect power before servicing; also shut off the water supply
• Note the original orientation; transfer any screws, clips, or spacers from the old support
• Install without overtightening to avoid damage; secure fit of the supported component after installation

This magnetron is the microwave's high-voltage tube that generates the microwaves responsible for heating food. Use it as a direct replacement when your microwave powers on but no longer heats properly. What it does:

• Generates the microwave energy that heats and cooks food inside the oven cavity.
• A failing magnetron commonly causes the oven to run but not heat; other signs can include weak or uneven heating.
• Can produce unusual humming, arcing or sparking inside the cavity, or a burning smell when failing.
• Works as part of the high-voltage circuit; other components affect overall function.

• Disconnect power and unplug the appliance before servicing; the high-voltage capacitor must be safely discharged.
• Handle the magnetron carefully by the mounting flange—avoid touching the ceramic antenna or terminals.
• Verify exact part number compatibility with your model before ordering; some repairs require replacing other high-voltage components.

This factory support stabilizes and positions its mating assembly so it stays secure and aligned during use. Replacing a worn or broken support helps restore proper fit and prevents looseness or shifting that can affect performance. What it does

• Provides structural support and correct positioning for the related assembly
• Helps prevent wobble, sagging, rattling, or misalignment
• Typical failure signs: visible cracks, broken/missing tabs, or a loose fit
• Can help resolve components not staying in place or moving unexpectedly

• 1 support

• Disconnect power to the appliance before servicing
• Access the support location and note the original orientation
• Transfer and reuse any original mounting hardware your model uses
• Seat the new support fully and verify a secure fit before restoring power

This Light Housing secures and protects the interior lamp assembly, helping keep the compartment safely illuminated. Replace a cracked or heat-damaged housing to restore a stable bulb fit and consistent lighting performance. What it does:

• Provides a stable mount for the interior light bulb/socket
• Shields nearby wiring and components around the lamp area
• Helps position the light for proper illumination inside the compartment
• Common signs of wear: cracked or melted housing, loose bulb fit, lens/cover won't stay attached, intermittent lighting from a poor physical connection

• 1 light housing

• Disconnect power to the appliance before servicing
• Remove the lens/cover and bulb, then unfasten the damaged housing
• Transfer the existing socket, wiring, and any hardware from the old housing as needed
• Reinstall the housing, replace bulb/cover, restore power, and test the light

This is the appliance's main power cord. It delivers household electricity to the unit so it can operate safely and reliably.

• Supplies AC power from the wall outlet to the appliance's internal wiring
• A damaged or failed cord can cause no power, intermittent power, or tripped breakers
• Replacing a worn cord can restore consistent power and improve safety

• Unplug the appliance and turn off power at the breaker before service
• Route and secure the cord to prevent pinching or abrasion

Replacement meal rack that restores support for cookware and bakeware in compatible Whirlpool ovens and ranges, providing correct clearance for even heating and easier loading and removal. What it does:

• Provides sturdy support for pans, dishes and bakeware during baking, roasting and broiling.
• Restores proper clearance and airflow for more consistent cooking results.
• Useful when the original rack is bent, damaged, missing or no longer seats correctly.
• Matches original equipment design to fit into the oven's rack support guides.

• Allow the appliance to cool and disconnect power before removing or installing the rack.
• Slide the rack into the oven's support rails until it seats securely; no special tools are typically required.
• Inspect support rails and rack stops for damage; replace if worn to prevent sliding or tipping.
• Do not use a warped or severely corroded rack—replace to avoid uneven cooking or safety hazards.