Gpt225sgloww Parts

This rack slide support secures the rack slide/rail inside your dishwasher, keeping the rack aligned so it rolls smoothly. Replace a cracked or missing support to restore easy rack movement and help prevent derailments.

• Anchors the rack slide/rail to the tub wall for stable support
• Keeps the rack level and properly aligned as it moves
• Allows the rack to glide in and out smoothly
• Common failure signs include a rack that sticks, sags, derails, or makes grinding/popping noises
• Replace if the bracket is cracked, warped, or missing

• Disconnect power and shut off water supply before servicing
• Remove the rack and release any rack stops as needed
• Detach the slide/rail from the old support and remove the support (tabs or screw)
• Install the new support in the same orientation; reattach the slide and rack and test rack travel

The Caster is an OEM part for GE portable dishwashers. It is one of four casters that elevate the dishwasher off the floor and provide mobility for installation and cleaning access.

Causes of a bad caster can include cracks, breaks, or loose components in the plastic caster housing due to years of use and stress. Mineral buildup or internal rust may cause roller or bearing malfunctions.

Symptoms of a bad caster include:

• The dishwasher leaning or tilting to one side when rolled
• Scratching or marking of flooring surfaces while moving the appliance
• Wobbly or unstable movement that makes the dishwasher difficult to maneuver

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

This left-side hinge mechanism secures and guides the refrigerator door so it opens and closes smoothly. It restores proper door alignment to help maintain an even seal and reliable operation. What it does:

• Supports the door weight and pivots to enable smooth opening and closing
• Restores proper door alignment when the door sags or binds
• Helps the door seal evenly to protect internal temperature stability
• Works as the moving hinge assembly that connects the door to the cabinet

• Unplug the appliance or disconnect power before beginning any repair
• Support the door while removing/installing the hinge to prevent damage or injury
• Basic hand tools are typically required; follow OEM instructions for torque and fastener sequence

Right-hand hinge mechanism that supports the appliance door pivot and restores proper alignment for secure closing. Replaces a worn or damaged RH hinge to stop door sagging, rubbing, or uneven gaps. What it does:

• Provides the pivot point and structural support for the right side of the appliance door.
• Restores correct door alignment to ensure a tight, even seal and smooth opening/closing.
• Commonly used to fix door sag, a crooked door, or a door that won't stay closed.
• Works as the OEM replacement hinge assembly designed for direct fit on the right side.

• Disconnect power to the appliance before beginning any repair and support the door to prevent it from falling.
• Installation typically requires removing the door or partially detaching it; keep fasteners and alignment marks for reassembly.
• Use appropriate hand tools, avoid overtightening fasteners, and check door operation and gap after installing the new hinge.

The Power Cord is an OEM replacement part for GE dishwashers. This electrical cord provides power to the appliance from the wall outlet. 

Causes of a bad power cord include accidental punctures, pinches, or other types of insulation damage. Normal wear and aging can also cause innerwire damage or connection faults. 

Symptoms of a bad power cord include:

• The dishwasher unable to power on
• Intermittent or unreliable operation  
• Shock or electrocution hazards presented by exposed wiring
• Loose, detached, or otherwise damaged connections at either end of the cord

This OEM GE replacement cord is also compatible with Hotpoint, RCA, and some Kenmore models. 

This airbreak flow meter assembly detects water flow and helps the appliance manage fill and dispense cycles for reliable operation. It replaces a failing flow sensor to restore correct water-sensing and cycle control. What it does:

• Measures water flow through the system so the control can confirm proper filling
• Helps prevent overfill or underfill conditions by reporting flow status to the control
• Common symptoms of a failing unit: long or no-fill cycles, water-related error codes, or the appliance not advancing through cycles
• Works as part of the water/ice/fill system to ensure timing and valve operation respond correctly

• Disconnect power and shut off the water supply before starting any repair
• Handle the sensor and electrical connector carefully; avoid pulling on wiring
• Install in the correct orientation and ensure all seals and fittings are seated to prevent leaks
• After installation, restore power/water and run a test cycle to verify proper operation

This replacement console is the outer control panel that houses the user controls and provides the finished front for your appliance. Restores proper button access and a clean, functional appearance. What it does:

• Replaces a cracked, warped or damaged control panel that prevents button access or looks worn
• Provides the mounting surface for switches, knobs and displays so controls operate correctly
• Helps stop drafts or moisture from entering the control cavity through damaged trim
• Restores a neat, factory appearance to the appliance front

• One console

• Unplug the appliance before starting to avoid shock or injury
• Removal typically requires taking off trim pieces, knobs or fascia screws—keep fasteners for reassembly
• Handle carefully to avoid scratching or cracking the new panel during installation

This wash pump discharge hose routes water from the washer's pump to the drain path, helping remove wash water during drain cycles. Replaces a cracked, split or clogged discharge hose to restore proper draining. What it does:

• Carries pump discharge water from the wash pump to the drain outlet
• Prevents leaks caused by cracks, splits or brittle sections in the original hose
• Helps stop water pooling or slow draining when the hose is damaged or disconnected
• Matches OEM shape and connection points for a direct replacement

• Disconnect power and water supply before starting any repair.
• Inspect pump outlet and drain fittings for damage; replace clamps if rusted or worn.

This genuine replacement screw secures appliance panels and components to restore proper fit and reduce rattling. It's a direct-fit fastener used where the original mounting hardware has been lost, stripped, or damaged. What it does:

• Fastens panels, brackets, or trim to the appliance frame
• Keeps controls and components securely mounted to prevent vibration and noise
• Helps restore proper alignment and prevents gaps that can trap dirt or moisture
• Can resolve symptoms like loose trim, rattling, or parts that shift during use

• Disconnect power to the appliance before attempting any repair
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent thread damage
• Wear gloves to protect hands from sharp sheet metal edges during installation

This ground screw secures an appliance's chassis grounding connection to ensure a reliable electrical ground and help reduce the risk of shock or electrical faults. Simple replacement when the original screw is missing, damaged, or corroded. What it does:

• Fastens the appliance ground wire or grounding strap to the metal chassis for a secure electrical ground.
• Restores a proper grounding point when the original screw is loose, stripped, corroded, or missing.
• Helps address symptoms related to poor grounding, such as intermittent power, electrical noise, or tripped breakers (as reported).
• Provides a direct, stable connection that supports safe appliance operation.

• One ground screw

• Disconnect power to the appliance before attempting any repairs to avoid electrical shock.
• Tighten to snug contact with the chassis; avoid overtightening which can strip threads or damage the metal.
• If ground wire or chassis threads are damaged, inspect for necessary additional parts or repair.

The Lower Spray Arm is an OEM replacement part for GE dishwashers. It is responsible for distributing water and detergent during the wash cycle, ensuring thorough cleaning of your dishes. This lower spray arm delivers a consistent and powerful spray of water to effectively remove food particles and stains from your dishes.

Symptoms of a faulty lower spray arm include:

• Inadequate cleaning of dishes
• Visible food particles or residue after the wash cycle
• Reduced water pressure during the wash cycle

A bad lower spray arm can occur due to wear and tear over time, clogging from debris or mineral deposits, or physical damage. If you notice poor cleaning results, reduced water pressure, or the spray arm not spinning properly, it may be time to replace the old or damaged lower spray arm with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The DRAIN PUMP ASM is an OEM component specifically designed for GE dishwashers. It is responsible for efficiently draining water from the dishwasher tub at the end of each cycle. 

Causes of a bad drain pump assembly can include a buildup of debris that causes clogs or hinders pump operation. Seals and gaskets may also deteriorate over time.

Symptoms of a bad drain pump assembly include: 

• Slow or incomplete draining of water at the end of cycles
• Puddles or standing water left in the bottom of the tub
• Strange noises or vibrations coming from the pump area
• Error codes related to draining issues

Proper drainage is essential for dishwasher performance and safety. Replacing the drain pump assembly with this genuine GE part helps restore thorough draining and ensures your dishwasher runs as intended.

This OEM GE replacement part is also compatible with some Hotpoint, RCA, and Kenmore dishwasher models.

The Door Striker Assembly is an OEM replacement part for GE dishwashers. It is responsible for securing the dishwasher door and ensuring a proper seal during operation. It provides a reliable and secure connection between the dishwasher door and the latch mechanism, allowing for smooth and hassle-free opening and closing of the door.

Symptoms of a faulty door striker assembly include:

• Difficulty in closing the dishwasher door
• Loose or unstable door
• Water leakage around the door area

A bad door striker assembly can occur due to wear and tear over time, damage to the striker or latch, or misalignment. If you notice issues such as difficulty in closing the dishwasher door, a loose or unstable door, or water leakage around the door, it may be time to replace the old or damaged door striker assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Main Control Board is an OEM component specifically designed for GE dishwashers. It controls washing functions, monitors performance, and ensures safe dishwasher operation. 

Causes of a bad control board can include faults in wiring or electronic components, moisture damage over time, or power surges that damage circuitry. 

Symptoms of a malfunctioning control board include:

• Cycles not completing or washing properly  
• Lights or displays not working
• Inability to control functions through buttons/switches
• Audible or visual error codes

This control board is also compatible with Hotpoint, RCA, and select Kenmore models.

This dishwasher fine filter sits beneath the lower spray arm and screens food particles before water is recirculated. Replacing a torn, warped, or clogged screen helps maintain cleaning performance and protects the circulation pump and spray system from debris. What it does:

• Screens fine food soils in the sump to help prevent recirculation during wash and rinse
• Helps protect the circulation pump and spray arms from debris
• Helps if dishes have gritty residue or soil redeposit after cycles
• Helps if the existing filter is torn, warped, or missing

• 1 fine filter

• Disconnect power at the breaker before servicing
• Remove the lower rack; remove the lower spray arm if required for access
• Rotate and lift out the old fine filter; clear any debris from the sump
• Seat the new filter flat and rotate to lock; reinstall any ultrafine filter

The Upper Rack Wheel Stud Assembly is an OEM part for GE dishwashers. It is designed to support and secure the upper rack of the dishwasher, allowing for smooth movement during loading and unloading.

A bad Upper Rack Wheel Stud Assembly can lead to issues such as a wobbly or unstable upper rack, difficulty in sliding the rack in and out, or even the complete detachment of the rack. Causes of a bad wheel stud assembly can include wear and tear over time, damage to the stud or wheel due to accidental impacts, or improper installation.

Symptoms of a bad Upper Rack Wheel Stud Assembly include:

• Wobbling or instability of the upper rack
• Difficulty in sliding the rack in and out smoothly
• Excessive noise or grinding sounds when moving the rack
• Inability to properly secure the upper rack in place

Replace your worn-out or damaged Upper Rack Wheel Stud Assembly with this genuine OEM GE part to restore your dishwasher's upper rack. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.